| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  *  Copyright (C) 1994  Linus Torvalds | 
 |  * | 
 |  *  29 dec 2001 - Fixed oopses caused by unchecked access to the vm86 | 
 |  *                stack - Manfred Spraul <manfred@colorfullife.com> | 
 |  * | 
 |  *  22 mar 2002 - Manfred detected the stackfaults, but didn't handle | 
 |  *                them correctly. Now the emulation will be in a | 
 |  *                consistent state after stackfaults - Kasper Dupont | 
 |  *                <kasperd@daimi.au.dk> | 
 |  * | 
 |  *  22 mar 2002 - Added missing clear_IF in set_vflags_* Kasper Dupont | 
 |  *                <kasperd@daimi.au.dk> | 
 |  * | 
 |  *  ?? ??? 2002 - Fixed premature returns from handle_vm86_fault | 
 |  *                caused by Kasper Dupont's changes - Stas Sergeev | 
 |  * | 
 |  *   4 apr 2002 - Fixed CHECK_IF_IN_TRAP broken by Stas' changes. | 
 |  *                Kasper Dupont <kasperd@daimi.au.dk> | 
 |  * | 
 |  *   9 apr 2002 - Changed syntax of macros in handle_vm86_fault. | 
 |  *                Kasper Dupont <kasperd@daimi.au.dk> | 
 |  * | 
 |  *   9 apr 2002 - Changed stack access macros to jump to a label | 
 |  *                instead of returning to userspace. This simplifies | 
 |  *                do_int, and is needed by handle_vm6_fault. Kasper | 
 |  *                Dupont <kasperd@daimi.au.dk> | 
 |  * | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/capability.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/syscalls.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/sched/task_stack.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/signal.h> | 
 | #include <linux/string.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/audit.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/security.h> | 
 |  | 
 | #include <linux/uaccess.h> | 
 | #include <asm/io.h> | 
 | #include <asm/tlbflush.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/traps.h> | 
 | #include <asm/vm86.h> | 
 | #include <asm/switch_to.h> | 
 |  | 
 | /* | 
 |  * Known problems: | 
 |  * | 
 |  * Interrupt handling is not guaranteed: | 
 |  * - a real x86 will disable all interrupts for one instruction | 
 |  *   after a "mov ss,xx" to make stack handling atomic even without | 
 |  *   the 'lss' instruction. We can't guarantee this in v86 mode, | 
 |  *   as the next instruction might result in a page fault or similar. | 
 |  * - a real x86 will have interrupts disabled for one instruction | 
 |  *   past the 'sti' that enables them. We don't bother with all the | 
 |  *   details yet. | 
 |  * | 
 |  * Let's hope these problems do not actually matter for anything. | 
 |  */ | 
 |  | 
 |  | 
 | /* | 
 |  * 8- and 16-bit register defines.. | 
 |  */ | 
 | #define AL(regs)	(((unsigned char *)&((regs)->pt.ax))[0]) | 
 | #define AH(regs)	(((unsigned char *)&((regs)->pt.ax))[1]) | 
 | #define IP(regs)	(*(unsigned short *)&((regs)->pt.ip)) | 
 | #define SP(regs)	(*(unsigned short *)&((regs)->pt.sp)) | 
 |  | 
 | /* | 
 |  * virtual flags (16 and 32-bit versions) | 
 |  */ | 
 | #define VFLAGS	(*(unsigned short *)&(current->thread.vm86->veflags)) | 
 | #define VEFLAGS	(current->thread.vm86->veflags) | 
 |  | 
 | #define set_flags(X, new, mask) \ | 
 | ((X) = ((X) & ~(mask)) | ((new) & (mask))) | 
 |  | 
 | #define SAFE_MASK	(0xDD5) | 
 | #define RETURN_MASK	(0xDFF) | 
 |  | 
 | void save_v86_state(struct kernel_vm86_regs *regs, int retval) | 
 | { | 
 | 	struct task_struct *tsk = current; | 
 | 	struct vm86plus_struct __user *user; | 
 | 	struct vm86 *vm86 = current->thread.vm86; | 
 |  | 
 | 	/* | 
 | 	 * This gets called from entry.S with interrupts disabled, but | 
 | 	 * from process context. Enable interrupts here, before trying | 
 | 	 * to access user space. | 
 | 	 */ | 
 | 	local_irq_enable(); | 
 |  | 
 | 	BUG_ON(!vm86); | 
 |  | 
 | 	set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | vm86->veflags_mask); | 
 | 	user = vm86->user_vm86; | 
 |  | 
 | 	if (!user_access_begin(user, vm86->vm86plus.is_vm86pus ? | 
 | 		       sizeof(struct vm86plus_struct) : | 
 | 		       sizeof(struct vm86_struct))) | 
 | 		goto Efault; | 
 |  | 
 | 	unsafe_put_user(regs->pt.bx, &user->regs.ebx, Efault_end); | 
 | 	unsafe_put_user(regs->pt.cx, &user->regs.ecx, Efault_end); | 
 | 	unsafe_put_user(regs->pt.dx, &user->regs.edx, Efault_end); | 
 | 	unsafe_put_user(regs->pt.si, &user->regs.esi, Efault_end); | 
 | 	unsafe_put_user(regs->pt.di, &user->regs.edi, Efault_end); | 
 | 	unsafe_put_user(regs->pt.bp, &user->regs.ebp, Efault_end); | 
 | 	unsafe_put_user(regs->pt.ax, &user->regs.eax, Efault_end); | 
 | 	unsafe_put_user(regs->pt.ip, &user->regs.eip, Efault_end); | 
 | 	unsafe_put_user(regs->pt.cs, &user->regs.cs, Efault_end); | 
 | 	unsafe_put_user(regs->pt.flags, &user->regs.eflags, Efault_end); | 
 | 	unsafe_put_user(regs->pt.sp, &user->regs.esp, Efault_end); | 
 | 	unsafe_put_user(regs->pt.ss, &user->regs.ss, Efault_end); | 
 | 	unsafe_put_user(regs->es, &user->regs.es, Efault_end); | 
 | 	unsafe_put_user(regs->ds, &user->regs.ds, Efault_end); | 
 | 	unsafe_put_user(regs->fs, &user->regs.fs, Efault_end); | 
 | 	unsafe_put_user(regs->gs, &user->regs.gs, Efault_end); | 
 |  | 
 | 	/* | 
 | 	 * Don't write screen_bitmap in case some user had a value there | 
 | 	 * and expected it to remain unchanged. | 
 | 	 */ | 
 |  | 
 | 	user_access_end(); | 
 |  | 
 | exit_vm86: | 
 | 	preempt_disable(); | 
 | 	tsk->thread.sp0 = vm86->saved_sp0; | 
 | 	tsk->thread.sysenter_cs = __KERNEL_CS; | 
 | 	update_task_stack(tsk); | 
 | 	refresh_sysenter_cs(&tsk->thread); | 
 | 	vm86->saved_sp0 = 0; | 
 | 	preempt_enable(); | 
 |  | 
 | 	memcpy(®s->pt, &vm86->regs32, sizeof(struct pt_regs)); | 
 |  | 
 | 	loadsegment(gs, vm86->regs32.gs); | 
 |  | 
 | 	regs->pt.ax = retval; | 
 | 	return; | 
 |  | 
 | Efault_end: | 
 | 	user_access_end(); | 
 | Efault: | 
 | 	pr_alert("could not access userspace vm86 info\n"); | 
 | 	force_exit_sig(SIGSEGV); | 
 | 	goto exit_vm86; | 
 | } | 
 |  | 
 | static int do_vm86_irq_handling(int subfunction, int irqnumber); | 
 | static long do_sys_vm86(struct vm86plus_struct __user *user_vm86, bool plus); | 
 |  | 
 | SYSCALL_DEFINE1(vm86old, struct vm86_struct __user *, user_vm86) | 
 | { | 
 | 	return do_sys_vm86((struct vm86plus_struct __user *) user_vm86, false); | 
 | } | 
 |  | 
 |  | 
 | SYSCALL_DEFINE2(vm86, unsigned long, cmd, unsigned long, arg) | 
 | { | 
 | 	switch (cmd) { | 
 | 	case VM86_REQUEST_IRQ: | 
 | 	case VM86_FREE_IRQ: | 
 | 	case VM86_GET_IRQ_BITS: | 
 | 	case VM86_GET_AND_RESET_IRQ: | 
 | 		return do_vm86_irq_handling(cmd, (int)arg); | 
 | 	case VM86_PLUS_INSTALL_CHECK: | 
 | 		/* | 
 | 		 * NOTE: on old vm86 stuff this will return the error | 
 | 		 *  from access_ok(), because the subfunction is | 
 | 		 *  interpreted as (invalid) address to vm86_struct. | 
 | 		 *  So the installation check works. | 
 | 		 */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */ | 
 | 	return do_sys_vm86((struct vm86plus_struct __user *) arg, true); | 
 | } | 
 |  | 
 |  | 
 | static long do_sys_vm86(struct vm86plus_struct __user *user_vm86, bool plus) | 
 | { | 
 | 	struct task_struct *tsk = current; | 
 | 	struct vm86 *vm86 = tsk->thread.vm86; | 
 | 	struct kernel_vm86_regs vm86regs; | 
 | 	struct pt_regs *regs = current_pt_regs(); | 
 | 	unsigned long err = 0; | 
 | 	struct vm86_struct v; | 
 |  | 
 | 	err = security_mmap_addr(0); | 
 | 	if (err) { | 
 | 		/* | 
 | 		 * vm86 cannot virtualize the address space, so vm86 users | 
 | 		 * need to manage the low 1MB themselves using mmap.  Given | 
 | 		 * that BIOS places important data in the first page, vm86 | 
 | 		 * is essentially useless if mmap_min_addr != 0.  DOSEMU, | 
 | 		 * for example, won't even bother trying to use vm86 if it | 
 | 		 * can't map a page at virtual address 0. | 
 | 		 * | 
 | 		 * To reduce the available kernel attack surface, simply | 
 | 		 * disallow vm86(old) for users who cannot mmap at va 0. | 
 | 		 * | 
 | 		 * The implementation of security_mmap_addr will allow | 
 | 		 * suitably privileged users to map va 0 even if | 
 | 		 * vm.mmap_min_addr is set above 0, and we want this | 
 | 		 * behavior for vm86 as well, as it ensures that legacy | 
 | 		 * tools like vbetool will not fail just because of | 
 | 		 * vm.mmap_min_addr. | 
 | 		 */ | 
 | 		pr_info_once("Denied a call to vm86(old) from %s[%d] (uid: %d).  Set the vm.mmap_min_addr sysctl to 0 and/or adjust LSM mmap_min_addr policy to enable vm86 if you are using a vm86-based DOS emulator.\n", | 
 | 			     current->comm, task_pid_nr(current), | 
 | 			     from_kuid_munged(&init_user_ns, current_uid())); | 
 | 		return -EPERM; | 
 | 	} | 
 |  | 
 | 	if (!vm86) { | 
 | 		if (!(vm86 = kzalloc(sizeof(*vm86), GFP_KERNEL))) | 
 | 			return -ENOMEM; | 
 | 		tsk->thread.vm86 = vm86; | 
 | 	} | 
 | 	if (vm86->saved_sp0) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (copy_from_user(&v, user_vm86, | 
 | 			offsetof(struct vm86_struct, int_revectored))) | 
 | 		return -EFAULT; | 
 |  | 
 |  | 
 | 	/* VM86_SCREEN_BITMAP had numerous bugs and appears to have no users. */ | 
 | 	if (v.flags & VM86_SCREEN_BITMAP) { | 
 | 		pr_info_once("vm86: '%s' uses VM86_SCREEN_BITMAP, which is no longer supported\n", | 
 | 			     current->comm); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	memset(&vm86regs, 0, sizeof(vm86regs)); | 
 |  | 
 | 	vm86regs.pt.bx = v.regs.ebx; | 
 | 	vm86regs.pt.cx = v.regs.ecx; | 
 | 	vm86regs.pt.dx = v.regs.edx; | 
 | 	vm86regs.pt.si = v.regs.esi; | 
 | 	vm86regs.pt.di = v.regs.edi; | 
 | 	vm86regs.pt.bp = v.regs.ebp; | 
 | 	vm86regs.pt.ax = v.regs.eax; | 
 | 	vm86regs.pt.ip = v.regs.eip; | 
 | 	vm86regs.pt.cs = v.regs.cs; | 
 | 	vm86regs.pt.flags = v.regs.eflags; | 
 | 	vm86regs.pt.sp = v.regs.esp; | 
 | 	vm86regs.pt.ss = v.regs.ss; | 
 | 	vm86regs.es = v.regs.es; | 
 | 	vm86regs.ds = v.regs.ds; | 
 | 	vm86regs.fs = v.regs.fs; | 
 | 	vm86regs.gs = v.regs.gs; | 
 |  | 
 | 	vm86->flags = v.flags; | 
 | 	vm86->cpu_type = v.cpu_type; | 
 |  | 
 | 	if (copy_from_user(&vm86->int_revectored, | 
 | 			   &user_vm86->int_revectored, | 
 | 			   sizeof(struct revectored_struct))) | 
 | 		return -EFAULT; | 
 | 	if (copy_from_user(&vm86->int21_revectored, | 
 | 			   &user_vm86->int21_revectored, | 
 | 			   sizeof(struct revectored_struct))) | 
 | 		return -EFAULT; | 
 | 	if (plus) { | 
 | 		if (copy_from_user(&vm86->vm86plus, &user_vm86->vm86plus, | 
 | 				   sizeof(struct vm86plus_info_struct))) | 
 | 			return -EFAULT; | 
 | 		vm86->vm86plus.is_vm86pus = 1; | 
 | 	} else | 
 | 		memset(&vm86->vm86plus, 0, | 
 | 		       sizeof(struct vm86plus_info_struct)); | 
 |  | 
 | 	memcpy(&vm86->regs32, regs, sizeof(struct pt_regs)); | 
 | 	vm86->user_vm86 = user_vm86; | 
 |  | 
 | /* | 
 |  * The flags register is also special: we cannot trust that the user | 
 |  * has set it up safely, so this makes sure interrupt etc flags are | 
 |  * inherited from protected mode. | 
 |  */ | 
 | 	VEFLAGS = vm86regs.pt.flags; | 
 | 	vm86regs.pt.flags &= SAFE_MASK; | 
 | 	vm86regs.pt.flags |= regs->flags & ~SAFE_MASK; | 
 | 	vm86regs.pt.flags |= X86_VM_MASK; | 
 |  | 
 | 	vm86regs.pt.orig_ax = regs->orig_ax; | 
 |  | 
 | 	switch (vm86->cpu_type) { | 
 | 	case CPU_286: | 
 | 		vm86->veflags_mask = 0; | 
 | 		break; | 
 | 	case CPU_386: | 
 | 		vm86->veflags_mask = X86_EFLAGS_NT | X86_EFLAGS_IOPL; | 
 | 		break; | 
 | 	case CPU_486: | 
 | 		vm86->veflags_mask = X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL; | 
 | 		break; | 
 | 	default: | 
 | 		vm86->veflags_mask = X86_EFLAGS_ID | X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | /* | 
 |  * Save old state | 
 |  */ | 
 | 	vm86->saved_sp0 = tsk->thread.sp0; | 
 | 	savesegment(gs, vm86->regs32.gs); | 
 |  | 
 | 	/* make room for real-mode segments */ | 
 | 	preempt_disable(); | 
 | 	tsk->thread.sp0 += 16; | 
 |  | 
 | 	if (boot_cpu_has(X86_FEATURE_SEP)) { | 
 | 		tsk->thread.sysenter_cs = 0; | 
 | 		refresh_sysenter_cs(&tsk->thread); | 
 | 	} | 
 |  | 
 | 	update_task_stack(tsk); | 
 | 	preempt_enable(); | 
 |  | 
 | 	memcpy((struct kernel_vm86_regs *)regs, &vm86regs, sizeof(vm86regs)); | 
 | 	return regs->ax; | 
 | } | 
 |  | 
 | static inline void set_IF(struct kernel_vm86_regs *regs) | 
 | { | 
 | 	VEFLAGS |= X86_EFLAGS_VIF; | 
 | } | 
 |  | 
 | static inline void clear_IF(struct kernel_vm86_regs *regs) | 
 | { | 
 | 	VEFLAGS &= ~X86_EFLAGS_VIF; | 
 | } | 
 |  | 
 | static inline void clear_TF(struct kernel_vm86_regs *regs) | 
 | { | 
 | 	regs->pt.flags &= ~X86_EFLAGS_TF; | 
 | } | 
 |  | 
 | static inline void clear_AC(struct kernel_vm86_regs *regs) | 
 | { | 
 | 	regs->pt.flags &= ~X86_EFLAGS_AC; | 
 | } | 
 |  | 
 | /* | 
 |  * It is correct to call set_IF(regs) from the set_vflags_* | 
 |  * functions. However someone forgot to call clear_IF(regs) | 
 |  * in the opposite case. | 
 |  * After the command sequence CLI PUSHF STI POPF you should | 
 |  * end up with interrupts disabled, but you ended up with | 
 |  * interrupts enabled. | 
 |  *  ( I was testing my own changes, but the only bug I | 
 |  *    could find was in a function I had not changed. ) | 
 |  * [KD] | 
 |  */ | 
 |  | 
 | static inline void set_vflags_long(unsigned long flags, struct kernel_vm86_regs *regs) | 
 | { | 
 | 	set_flags(VEFLAGS, flags, current->thread.vm86->veflags_mask); | 
 | 	set_flags(regs->pt.flags, flags, SAFE_MASK); | 
 | 	if (flags & X86_EFLAGS_IF) | 
 | 		set_IF(regs); | 
 | 	else | 
 | 		clear_IF(regs); | 
 | } | 
 |  | 
 | static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs *regs) | 
 | { | 
 | 	set_flags(VFLAGS, flags, current->thread.vm86->veflags_mask); | 
 | 	set_flags(regs->pt.flags, flags, SAFE_MASK); | 
 | 	if (flags & X86_EFLAGS_IF) | 
 | 		set_IF(regs); | 
 | 	else | 
 | 		clear_IF(regs); | 
 | } | 
 |  | 
 | static inline unsigned long get_vflags(struct kernel_vm86_regs *regs) | 
 | { | 
 | 	unsigned long flags = regs->pt.flags & RETURN_MASK; | 
 |  | 
 | 	if (VEFLAGS & X86_EFLAGS_VIF) | 
 | 		flags |= X86_EFLAGS_IF; | 
 | 	flags |= X86_EFLAGS_IOPL; | 
 | 	return flags | (VEFLAGS & current->thread.vm86->veflags_mask); | 
 | } | 
 |  | 
 | static inline int is_revectored(int nr, struct revectored_struct *bitmap) | 
 | { | 
 | 	return test_bit(nr, bitmap->__map); | 
 | } | 
 |  | 
 | #define val_byte(val, n) (((__u8 *)&val)[n]) | 
 |  | 
 | #define pushb(base, ptr, val, err_label) \ | 
 | 	do { \ | 
 | 		__u8 __val = val; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(__val, base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 	} while (0) | 
 |  | 
 | #define pushw(base, ptr, val, err_label) \ | 
 | 	do { \ | 
 | 		__u16 __val = val; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(val_byte(__val, 1), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(val_byte(__val, 0), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 	} while (0) | 
 |  | 
 | #define pushl(base, ptr, val, err_label) \ | 
 | 	do { \ | 
 | 		__u32 __val = val; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(val_byte(__val, 3), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(val_byte(__val, 2), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(val_byte(__val, 1), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr--; \ | 
 | 		if (put_user(val_byte(__val, 0), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 	} while (0) | 
 |  | 
 | #define popb(base, ptr, err_label) \ | 
 | 	({ \ | 
 | 		__u8 __res; \ | 
 | 		if (get_user(__res, base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		__res; \ | 
 | 	}) | 
 |  | 
 | #define popw(base, ptr, err_label) \ | 
 | 	({ \ | 
 | 		__u16 __res; \ | 
 | 		if (get_user(val_byte(__res, 0), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		if (get_user(val_byte(__res, 1), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		__res; \ | 
 | 	}) | 
 |  | 
 | #define popl(base, ptr, err_label) \ | 
 | 	({ \ | 
 | 		__u32 __res; \ | 
 | 		if (get_user(val_byte(__res, 0), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		if (get_user(val_byte(__res, 1), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		if (get_user(val_byte(__res, 2), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		if (get_user(val_byte(__res, 3), base + ptr) < 0) \ | 
 | 			goto err_label; \ | 
 | 		ptr++; \ | 
 | 		__res; \ | 
 | 	}) | 
 |  | 
 | /* There are so many possible reasons for this function to return | 
 |  * VM86_INTx, so adding another doesn't bother me. We can expect | 
 |  * userspace programs to be able to handle it. (Getting a problem | 
 |  * in userspace is always better than an Oops anyway.) [KD] | 
 |  */ | 
 | static void do_int(struct kernel_vm86_regs *regs, int i, | 
 |     unsigned char __user *ssp, unsigned short sp) | 
 | { | 
 | 	unsigned long __user *intr_ptr; | 
 | 	unsigned long segoffs; | 
 | 	struct vm86 *vm86 = current->thread.vm86; | 
 |  | 
 | 	if (regs->pt.cs == BIOSSEG) | 
 | 		goto cannot_handle; | 
 | 	if (is_revectored(i, &vm86->int_revectored)) | 
 | 		goto cannot_handle; | 
 | 	if (i == 0x21 && is_revectored(AH(regs), &vm86->int21_revectored)) | 
 | 		goto cannot_handle; | 
 | 	intr_ptr = (unsigned long __user *) (i << 2); | 
 | 	if (get_user(segoffs, intr_ptr)) | 
 | 		goto cannot_handle; | 
 | 	if ((segoffs >> 16) == BIOSSEG) | 
 | 		goto cannot_handle; | 
 | 	pushw(ssp, sp, get_vflags(regs), cannot_handle); | 
 | 	pushw(ssp, sp, regs->pt.cs, cannot_handle); | 
 | 	pushw(ssp, sp, IP(regs), cannot_handle); | 
 | 	regs->pt.cs = segoffs >> 16; | 
 | 	SP(regs) -= 6; | 
 | 	IP(regs) = segoffs & 0xffff; | 
 | 	clear_TF(regs); | 
 | 	clear_IF(regs); | 
 | 	clear_AC(regs); | 
 | 	return; | 
 |  | 
 | cannot_handle: | 
 | 	save_v86_state(regs, VM86_INTx + (i << 8)); | 
 | } | 
 |  | 
 | int handle_vm86_trap(struct kernel_vm86_regs *regs, long error_code, int trapno) | 
 | { | 
 | 	struct vm86 *vm86 = current->thread.vm86; | 
 |  | 
 | 	if (vm86->vm86plus.is_vm86pus) { | 
 | 		if ((trapno == 3) || (trapno == 1)) { | 
 | 			save_v86_state(regs, VM86_TRAP + (trapno << 8)); | 
 | 			return 0; | 
 | 		} | 
 | 		do_int(regs, trapno, (unsigned char __user *) (regs->pt.ss << 4), SP(regs)); | 
 | 		return 0; | 
 | 	} | 
 | 	if (trapno != 1) | 
 | 		return 1; /* we let this handle by the calling routine */ | 
 | 	current->thread.trap_nr = trapno; | 
 | 	current->thread.error_code = error_code; | 
 | 	force_sig(SIGTRAP); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void handle_vm86_fault(struct kernel_vm86_regs *regs, long error_code) | 
 | { | 
 | 	unsigned char opcode; | 
 | 	unsigned char __user *csp; | 
 | 	unsigned char __user *ssp; | 
 | 	unsigned short ip, sp, orig_flags; | 
 | 	int data32, pref_done; | 
 | 	struct vm86plus_info_struct *vmpi = ¤t->thread.vm86->vm86plus; | 
 |  | 
 | #define CHECK_IF_IN_TRAP \ | 
 | 	if (vmpi->vm86dbg_active && vmpi->vm86dbg_TFpendig) \ | 
 | 		newflags |= X86_EFLAGS_TF | 
 |  | 
 | 	orig_flags = *(unsigned short *)®s->pt.flags; | 
 |  | 
 | 	csp = (unsigned char __user *) (regs->pt.cs << 4); | 
 | 	ssp = (unsigned char __user *) (regs->pt.ss << 4); | 
 | 	sp = SP(regs); | 
 | 	ip = IP(regs); | 
 |  | 
 | 	data32 = 0; | 
 | 	pref_done = 0; | 
 | 	do { | 
 | 		switch (opcode = popb(csp, ip, simulate_sigsegv)) { | 
 | 		case 0x66:      /* 32-bit data */     data32 = 1; break; | 
 | 		case 0x67:      /* 32-bit address */  break; | 
 | 		case 0x2e:      /* CS */              break; | 
 | 		case 0x3e:      /* DS */              break; | 
 | 		case 0x26:      /* ES */              break; | 
 | 		case 0x36:      /* SS */              break; | 
 | 		case 0x65:      /* GS */              break; | 
 | 		case 0x64:      /* FS */              break; | 
 | 		case 0xf2:      /* repnz */       break; | 
 | 		case 0xf3:      /* rep */             break; | 
 | 		default: pref_done = 1; | 
 | 		} | 
 | 	} while (!pref_done); | 
 |  | 
 | 	switch (opcode) { | 
 |  | 
 | 	/* pushf */ | 
 | 	case 0x9c: | 
 | 		if (data32) { | 
 | 			pushl(ssp, sp, get_vflags(regs), simulate_sigsegv); | 
 | 			SP(regs) -= 4; | 
 | 		} else { | 
 | 			pushw(ssp, sp, get_vflags(regs), simulate_sigsegv); | 
 | 			SP(regs) -= 2; | 
 | 		} | 
 | 		IP(regs) = ip; | 
 | 		goto vm86_fault_return; | 
 |  | 
 | 	/* popf */ | 
 | 	case 0x9d: | 
 | 		{ | 
 | 		unsigned long newflags; | 
 | 		if (data32) { | 
 | 			newflags = popl(ssp, sp, simulate_sigsegv); | 
 | 			SP(regs) += 4; | 
 | 		} else { | 
 | 			newflags = popw(ssp, sp, simulate_sigsegv); | 
 | 			SP(regs) += 2; | 
 | 		} | 
 | 		IP(regs) = ip; | 
 | 		CHECK_IF_IN_TRAP; | 
 | 		if (data32) | 
 | 			set_vflags_long(newflags, regs); | 
 | 		else | 
 | 			set_vflags_short(newflags, regs); | 
 |  | 
 | 		goto check_vip; | 
 | 		} | 
 |  | 
 | 	/* int xx */ | 
 | 	case 0xcd: { | 
 | 		int intno = popb(csp, ip, simulate_sigsegv); | 
 | 		IP(regs) = ip; | 
 | 		if (vmpi->vm86dbg_active) { | 
 | 			if ((1 << (intno & 7)) & vmpi->vm86dbg_intxxtab[intno >> 3]) { | 
 | 				save_v86_state(regs, VM86_INTx + (intno << 8)); | 
 | 				return; | 
 | 			} | 
 | 		} | 
 | 		do_int(regs, intno, ssp, sp); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* iret */ | 
 | 	case 0xcf: | 
 | 		{ | 
 | 		unsigned long newip; | 
 | 		unsigned long newcs; | 
 | 		unsigned long newflags; | 
 | 		if (data32) { | 
 | 			newip = popl(ssp, sp, simulate_sigsegv); | 
 | 			newcs = popl(ssp, sp, simulate_sigsegv); | 
 | 			newflags = popl(ssp, sp, simulate_sigsegv); | 
 | 			SP(regs) += 12; | 
 | 		} else { | 
 | 			newip = popw(ssp, sp, simulate_sigsegv); | 
 | 			newcs = popw(ssp, sp, simulate_sigsegv); | 
 | 			newflags = popw(ssp, sp, simulate_sigsegv); | 
 | 			SP(regs) += 6; | 
 | 		} | 
 | 		IP(regs) = newip; | 
 | 		regs->pt.cs = newcs; | 
 | 		CHECK_IF_IN_TRAP; | 
 | 		if (data32) { | 
 | 			set_vflags_long(newflags, regs); | 
 | 		} else { | 
 | 			set_vflags_short(newflags, regs); | 
 | 		} | 
 | 		goto check_vip; | 
 | 		} | 
 |  | 
 | 	/* cli */ | 
 | 	case 0xfa: | 
 | 		IP(regs) = ip; | 
 | 		clear_IF(regs); | 
 | 		goto vm86_fault_return; | 
 |  | 
 | 	/* sti */ | 
 | 	/* | 
 | 	 * Damn. This is incorrect: the 'sti' instruction should actually | 
 | 	 * enable interrupts after the /next/ instruction. Not good. | 
 | 	 * | 
 | 	 * Probably needs some horsing around with the TF flag. Aiee.. | 
 | 	 */ | 
 | 	case 0xfb: | 
 | 		IP(regs) = ip; | 
 | 		set_IF(regs); | 
 | 		goto check_vip; | 
 |  | 
 | 	default: | 
 | 		save_v86_state(regs, VM86_UNKNOWN); | 
 | 	} | 
 |  | 
 | 	return; | 
 |  | 
 | check_vip: | 
 | 	if ((VEFLAGS & (X86_EFLAGS_VIP | X86_EFLAGS_VIF)) == | 
 | 	    (X86_EFLAGS_VIP | X86_EFLAGS_VIF)) { | 
 | 		save_v86_state(regs, VM86_STI); | 
 | 		return; | 
 | 	} | 
 |  | 
 | vm86_fault_return: | 
 | 	if (vmpi->force_return_for_pic  && (VEFLAGS & (X86_EFLAGS_IF | X86_EFLAGS_VIF))) { | 
 | 		save_v86_state(regs, VM86_PICRETURN); | 
 | 		return; | 
 | 	} | 
 | 	if (orig_flags & X86_EFLAGS_TF) | 
 | 		handle_vm86_trap(regs, 0, X86_TRAP_DB); | 
 | 	return; | 
 |  | 
 | simulate_sigsegv: | 
 | 	/* FIXME: After a long discussion with Stas we finally | 
 | 	 *        agreed, that this is wrong. Here we should | 
 | 	 *        really send a SIGSEGV to the user program. | 
 | 	 *        But how do we create the correct context? We | 
 | 	 *        are inside a general protection fault handler | 
 | 	 *        and has just returned from a page fault handler. | 
 | 	 *        The correct context for the signal handler | 
 | 	 *        should be a mixture of the two, but how do we | 
 | 	 *        get the information? [KD] | 
 | 	 */ | 
 | 	save_v86_state(regs, VM86_UNKNOWN); | 
 | } | 
 |  | 
 | /* ---------------- vm86 special IRQ passing stuff ----------------- */ | 
 |  | 
 | #define VM86_IRQNAME		"vm86irq" | 
 |  | 
 | static struct vm86_irqs { | 
 | 	struct task_struct *tsk; | 
 | 	int sig; | 
 | } vm86_irqs[16]; | 
 |  | 
 | static DEFINE_SPINLOCK(irqbits_lock); | 
 | static int irqbits; | 
 |  | 
 | #define ALLOWED_SIGS (1 /* 0 = don't send a signal */ \ | 
 | 	| (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO)  | (1 << SIGURG) \ | 
 | 	| (1 << SIGUNUSED)) | 
 |  | 
 | static irqreturn_t irq_handler(int intno, void *dev_id) | 
 | { | 
 | 	int irq_bit; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&irqbits_lock, flags); | 
 | 	irq_bit = 1 << intno; | 
 | 	if ((irqbits & irq_bit) || !vm86_irqs[intno].tsk) | 
 | 		goto out; | 
 | 	irqbits |= irq_bit; | 
 | 	if (vm86_irqs[intno].sig) | 
 | 		send_sig(vm86_irqs[intno].sig, vm86_irqs[intno].tsk, 1); | 
 | 	/* | 
 | 	 * IRQ will be re-enabled when user asks for the irq (whether | 
 | 	 * polling or as a result of the signal) | 
 | 	 */ | 
 | 	disable_irq_nosync(intno); | 
 | 	spin_unlock_irqrestore(&irqbits_lock, flags); | 
 | 	return IRQ_HANDLED; | 
 |  | 
 | out: | 
 | 	spin_unlock_irqrestore(&irqbits_lock, flags); | 
 | 	return IRQ_NONE; | 
 | } | 
 |  | 
 | static inline void free_vm86_irq(int irqnumber) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	free_irq(irqnumber, NULL); | 
 | 	vm86_irqs[irqnumber].tsk = NULL; | 
 |  | 
 | 	spin_lock_irqsave(&irqbits_lock, flags); | 
 | 	irqbits &= ~(1 << irqnumber); | 
 | 	spin_unlock_irqrestore(&irqbits_lock, flags); | 
 | } | 
 |  | 
 | void release_vm86_irqs(struct task_struct *task) | 
 | { | 
 | 	int i; | 
 | 	for (i = FIRST_VM86_IRQ ; i <= LAST_VM86_IRQ; i++) | 
 | 	    if (vm86_irqs[i].tsk == task) | 
 | 		free_vm86_irq(i); | 
 | } | 
 |  | 
 | static inline int get_and_reset_irq(int irqnumber) | 
 | { | 
 | 	int bit; | 
 | 	unsigned long flags; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (invalid_vm86_irq(irqnumber)) return 0; | 
 | 	if (vm86_irqs[irqnumber].tsk != current) return 0; | 
 | 	spin_lock_irqsave(&irqbits_lock, flags); | 
 | 	bit = irqbits & (1 << irqnumber); | 
 | 	irqbits &= ~bit; | 
 | 	if (bit) { | 
 | 		enable_irq(irqnumber); | 
 | 		ret = 1; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&irqbits_lock, flags); | 
 | 	return ret; | 
 | } | 
 |  | 
 |  | 
 | static int do_vm86_irq_handling(int subfunction, int irqnumber) | 
 | { | 
 | 	int ret; | 
 | 	switch (subfunction) { | 
 | 		case VM86_GET_AND_RESET_IRQ: { | 
 | 			return get_and_reset_irq(irqnumber); | 
 | 		} | 
 | 		case VM86_GET_IRQ_BITS: { | 
 | 			return irqbits; | 
 | 		} | 
 | 		case VM86_REQUEST_IRQ: { | 
 | 			int sig = irqnumber >> 8; | 
 | 			int irq = irqnumber & 255; | 
 | 			if (!capable(CAP_SYS_ADMIN)) return -EPERM; | 
 | 			if (!((1 << sig) & ALLOWED_SIGS)) return -EPERM; | 
 | 			if (invalid_vm86_irq(irq)) return -EPERM; | 
 | 			if (vm86_irqs[irq].tsk) return -EPERM; | 
 | 			ret = request_irq(irq, &irq_handler, 0, VM86_IRQNAME, NULL); | 
 | 			if (ret) return ret; | 
 | 			vm86_irqs[irq].sig = sig; | 
 | 			vm86_irqs[irq].tsk = current; | 
 | 			return irq; | 
 | 		} | 
 | 		case  VM86_FREE_IRQ: { | 
 | 			if (invalid_vm86_irq(irqnumber)) return -EPERM; | 
 | 			if (!vm86_irqs[irqnumber].tsk) return 0; | 
 | 			if (vm86_irqs[irqnumber].tsk != current) return -EPERM; | 
 | 			free_vm86_irq(irqnumber); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | 	return -EINVAL; | 
 | } | 
 |  |