blob: 54d8f7d9bb339fce495d8b8301f9a7132f9e9dde [file] [log] [blame]
/*
* wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
*
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
*
* Licensed under GPLv2 or later
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "wm,wm8750";
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
device_type = "cpu";
compatible = "arm,arm1176jzf";
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
i2c0 = &i2c_0;
i2c1 = &i2c_1;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
interrupt-parent = <&intc0>;
intc0: interrupt-controller@d8140000 {
compatible = "via,vt8500-intc";
interrupt-controller;
reg = <0xd8140000 0x10000>;
#interrupt-cells = <1>;
};
/* Secondary IC cascaded to intc0 */
intc1: interrupt-controller@d8150000 {
compatible = "via,vt8500-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xD8150000 0x10000>;
interrupts = <56 57 58 59 60 61 62 63>;
};
pinctrl: pinctrl@d8110000 {
compatible = "wm,wm8750-pinctrl";
reg = <0xd8110000 0x10000>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
ref24: ref24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
ref25: ref25M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
plla: plla {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x200>;
};
pllb: pllb {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x204>;
};
pllc: pllc {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x208>;
};
plld: plld {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x20C>;
};
plle: plle {
#clock-cells = <0>;
compatible = "wm,wm8750-pll-clock";
clocks = <&ref25>;
reg = <0x210>;
};
clkarm: arm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&plla>;
divisor-reg = <0x300>;
};
clkahb: ahb {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x304>;
};
clkapb: apb {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x320>;
};
clkddr: ddr {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&plld>;
divisor-reg = <0x310>;
};
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <24>;
};
clkuart1: uart1 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <25>;
};
clkuart2: uart2 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <26>;
};
clkuart3: uart3 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <27>;
};
clkuart4: uart4 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <28>;
};
clkuart5: uart5 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x254>;
enable-bit = <29>;
};
clkpwm: pwm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x350>;
enable-reg = <0x250>;
enable-bit = <17>;
};
clksdhc: sdhc {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x330>;
divisor-mask = <0x3f>;
enable-reg = <0x250>;
enable-bit = <0>;
};
clki2c0: i2c0clk {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x3A0>;
enable-reg = <0x250>;
enable-bit = <8>;
};
clki2c1: i2c1clk {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
divisor-reg = <0x3A4>;
enable-reg = <0x250>;
enable-bit = <9>;
};
};
};
pwm: pwm@d8220000 {
#pwm-cells = <3>;
compatible = "via,vt8500-pwm";
reg = <0xd8220000 0x100>;
clocks = <&clkpwm>;
};
timer@d8130100 {
compatible = "via,vt8500-timer";
reg = <0xd8130100 0x28>;
interrupts = <36>;
};
ehci@d8007900 {
compatible = "via,vt8500-ehci";
reg = <0xd8007900 0x200>;
interrupts = <26>;
};
uhci@d8007b00 {
compatible = "platform-uhci";
reg = <0xd8007b00 0x200>;
interrupts = <26>;
};
uhci@d8008d00 {
compatible = "platform-uhci";
reg = <0xd8008d00 0x200>;
interrupts = <26>;
};
uart0: serial@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&clkuart0>;
status = "disabled";
};
uart1: serial@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&clkuart1>;
status = "disabled";
};
uart2: serial@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&clkuart2>;
status = "disabled";
};
uart3: serial@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&clkuart3>;
status = "disabled";
};
uart4: serial@d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <30>;
clocks = <&clkuart4>;
status = "disabled";
};
uart5: serial@d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <43>;
clocks = <&clkuart5>;
status = "disabled";
};
rtc@d8100000 {
compatible = "via,vt8500-rtc";
reg = <0xd8100000 0x10000>;
interrupts = <48>;
};
sdhc@d800a000 {
compatible = "wm,wm8505-sdhc";
reg = <0xd800a000 0x1000>;
interrupts = <20 21>;
clocks = <&clksdhc>;
bus-width = <4>;
sdon-inverted;
};
i2c_0: i2c@d8280000 {
compatible = "wm,wm8505-i2c";
reg = <0xd8280000 0x1000>;
interrupts = <19>;
clocks = <&clki2c0>;
clock-frequency = <400000>;
};
i2c_1: i2c@d8320000 {
compatible = "wm,wm8505-i2c";
reg = <0xd8320000 0x1000>;
interrupts = <18>;
clocks = <&clki2c1>;
clock-frequency = <400000>;
};
};
};