blob: 9c9143ed40037f04e63eec7c7e5e014083dd281d [file] [log] [blame]
/*
* Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am33xx.dtsi"
/ {
model = "Newflow AM335x NanoBone";
compatible = "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&dcdc2_reg>;
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
leds {
compatible = "gpio-leds";
led0 {
label = "nanobone:green:usr1";
gpios = <&gpio1 5 0>;
default-state = "off";
};
};
};
&am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&misc_pins>;
misc_pins: misc_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
>;
};
gpmc_pins: gpmc_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
>;
};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: uart1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
uart2_pins: uart2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
>;
};
uart4_pins: uart4_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
>;
};
uart5_pins: uart5_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
>;
};
mmc1_pins: mmc1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
rs485-rx-during-tx;
rs485-rts-delay = <1 1>;
linux,rs485-enabled-at-boot-time;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
rs485-rts-active-high;
rs485-rts-delay = <1 1>;
linux,rs485-enabled-at-boot-time;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&uart5_pins>;
status = "okay";
};
&i2c0 {
status = "okay";
pinctrl-names = "default";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
gpio@20 {
compatible = "microchip,mcp23017";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
};
tps: tps@24 {
reg = <0x24>;
};
eeprom@53 {
compatible = "microchip,24c02", "atmel,24c02";
reg = <0x53>;
pagesize = <8>;
};
rtc@68 {
compatible = "dallas,ds1307";
reg = <0x68>;
};
};
&elm {
status = "okay";
};
&gpmc {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
status = "okay";
gpmc,num-waitpins = <2>;
pinctrl-names = "default";
pinctrl-0 = <&gpmc_pins>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x08000000 0x08000000>, /* CS0: NOR 128M */
<1 0 0x1c000000 0x01000000>; /* CS1: FRAM 16M */
nor@0,0 {
reg = <0 0x00000000 0x08000000>;
compatible = "cfi-flash";
linux,mtd-name = "spansion,s29gl010p11t";
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <160>;
gpmc,cs-wr-off-ns = <160>;
gpmc,adv-on-ns = <10>;
gpmc,adv-rd-off-ns = <30>;
gpmc,adv-wr-off-ns = <30>;
gpmc,oe-on-ns = <40>;
gpmc,oe-off-ns = <160>;
gpmc,we-on-ns = <40>;
gpmc,we-off-ns = <160>;
gpmc,rd-cycle-ns = <160>;
gpmc,wr-cycle-ns = <160>;
gpmc,access-ns = <150>;
gpmc,page-burst-access-ns = <10>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-delay-ns = <20>;
gpmc,wr-data-mux-bus-ns = <70>;
gpmc,wr-access-ns = <80>;
#address-cells = <1>;
#size-cells = <1>;
/*
MTD partition table
===================
+------------+-->0x00000000-> U-Boot start
| |
| |-->0x000BFFFF-> U-Boot end
| |-->0x000C0000-> ENV1 start
| |
| |-->0x000DFFFF-> ENV1 end
| |-->0x000E0000-> ENV2 start
| |
| |-->0x000FFFFF-> ENV2 end
| |-->0x00100000-> Kernel start
| |
| |-->0x004FFFFF-> Kernel end
| |-->0x00500000-> File system start
| |
| |-->0x01FFFFFF-> File system end
| |-->0x02000000-> User data start
| |
| |-->0x03FFFFFF-> User data end
| |-->0x04000000-> Data storage start
| |
+------------+-->0x08000000-> NOR end (Free end)
*/
partition@0 {
label = "boot";
reg = <0x00000000 0x000c0000>; /* 768KB */
};
partition@1 {
label = "env1";
reg = <0x000c0000 0x00020000>; /* 128KB */
};
partition@2 {
label = "env2";
reg = <0x000e0000 0x00020000>; /* 128KB */
};
partition@3 {
label = "kernel";
reg = <0x00100000 0x00400000>; /* 4MB */
};
partition@4 {
label = "rootfs";
reg = <0x00500000 0x01b00000>; /* 27MB */
};
partition@5 {
label = "user";
reg = <0x02000000 0x02000000>; /* 32MB */
};
partition@6 {
label = "data";
reg = <0x04000000 0x04000000>; /* 64MB */
};
};
fram@1,0 {
reg = <1 0x00000000 0x01000000>;
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <160>;
gpmc,cs-wr-off-ns = <160>;
gpmc,adv-on-ns = <10>;
gpmc,adv-rd-off-ns = <20>;
gpmc,adv-wr-off-ns = <20>;
gpmc,oe-on-ns = <30>;
gpmc,oe-off-ns = <150>;
gpmc,we-on-ns = <30>;
gpmc,we-off-ns = <150>;
gpmc,rd-cycle-ns = <160>;
gpmc,wr-cycle-ns = <160>;
gpmc,access-ns = <130>;
gpmc,page-burst-access-ns = <10>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
gpmc,cycle2cycle-delay-ns = <10>;
gpmc,wr-data-mux-bus-ns = <30>;
gpmc,wr-access-ns = <0>;
};
};
&mac {
dual_emac;
status = "okay";
};
&davinci_mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
&cpsw_emac0 {
phy-handle = <&ethphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy-handle = <&ethphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
&mmc1 {
status = "okay";
vmmc-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
bus-width = <4>;
cd-gpios = <&gpio3 8 0>;
wp-gpios = <&gpio3 18 0>;
};
#include "tps65217.dtsi"
&tps {
regulators {
dcdc1_reg: regulator@0 {
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
regulator-boot-on;
regulator-always-on;
};
dcdc2_reg: regulator@1 {
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
regulator-max-microvolt = <1140000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3_reg: regulator@2 {
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
regulator-max-microvolt = <1140000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
regulator-boot-on;
regulator-always-on;
};
};
};