blob: 0dab156fcf41775fad139313d64c70fa2f65a052 [file] [log] [blame]
ZTE ZX296702 GPIO controller
Required properties:
- compatible : "zte,zx296702-gpio"
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt mapping for GPIO IRQ.
- gpio-ranges : Interaction with the PINCTRL subsystem.
gpio1: gpio@b008040 {
compatible = "zte,zx296702-gpio";
reg = <0xb008040 0x40>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = < &pmx0 0 54 2 &pmx0 2 59 14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&intc>;
interrupt-controller;
#interrupt-cells = <2>;
clock-names = "gpio_pclk";
clocks = <&lsp0clk ZX296702_GPIO_CLK>;
};