|  | /* | 
|  | *  linux/kernel/printk.c | 
|  | * | 
|  | *  Copyright (C) 1991, 1992  Linus Torvalds | 
|  | * | 
|  | * Modified to make sys_syslog() more flexible: added commands to | 
|  | * return the last 4k of kernel messages, regardless of whether | 
|  | * they've been read or not.  Added option to suppress kernel printk's | 
|  | * to the console.  Added hook for sending the console messages | 
|  | * elsewhere, in preparation for a serial line console (someday). | 
|  | * Ted Ts'o, 2/11/93. | 
|  | * Modified for sysctl support, 1/8/97, Chris Horn. | 
|  | * Fixed SMP synchronization, 08/08/99, Manfred Spraul | 
|  | *     manfred@colorfullife.com | 
|  | * Rewrote bits to get rid of console_lock | 
|  | *	01Mar01 Andrew Morton | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/tty_driver.h> | 
|  | #include <linux/console.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/nmi.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/security.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/memblock.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/crash_core.h> | 
|  | #include <linux/kdb.h> | 
|  | #include <linux/ratelimit.h> | 
|  | #include <linux/kmsg_dump.h> | 
|  | #include <linux/syslog.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/rculist.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/irq_work.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/sched/clock.h> | 
|  | #include <linux/sched/debug.h> | 
|  | #include <linux/sched/task_stack.h> | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  | #include <asm/sections.h> | 
|  |  | 
|  | #include <trace/events/initcall.h> | 
|  | #define CREATE_TRACE_POINTS | 
|  | #include <trace/events/printk.h> | 
|  |  | 
|  | #include "console_cmdline.h" | 
|  | #include "braille.h" | 
|  | #include "internal.h" | 
|  |  | 
|  | int console_printk[4] = { | 
|  | CONSOLE_LOGLEVEL_DEFAULT,	/* console_loglevel */ | 
|  | MESSAGE_LOGLEVEL_DEFAULT,	/* default_message_loglevel */ | 
|  | CONSOLE_LOGLEVEL_MIN,		/* minimum_console_loglevel */ | 
|  | CONSOLE_LOGLEVEL_DEFAULT,	/* default_console_loglevel */ | 
|  | }; | 
|  |  | 
|  | atomic_t ignore_console_lock_warning __read_mostly = ATOMIC_INIT(0); | 
|  | EXPORT_SYMBOL(ignore_console_lock_warning); | 
|  |  | 
|  | /* | 
|  | * Low level drivers may need that to know if they can schedule in | 
|  | * their unblank() callback or not. So let's export it. | 
|  | */ | 
|  | int oops_in_progress; | 
|  | EXPORT_SYMBOL(oops_in_progress); | 
|  |  | 
|  | /* | 
|  | * console_sem protects the console_drivers list, and also | 
|  | * provides serialisation for access to the entire console | 
|  | * driver system. | 
|  | */ | 
|  | static DEFINE_SEMAPHORE(console_sem); | 
|  | struct console *console_drivers; | 
|  | EXPORT_SYMBOL_GPL(console_drivers); | 
|  |  | 
|  | #ifdef CONFIG_LOCKDEP | 
|  | static struct lockdep_map console_lock_dep_map = { | 
|  | .name = "console_lock" | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | enum devkmsg_log_bits { | 
|  | __DEVKMSG_LOG_BIT_ON = 0, | 
|  | __DEVKMSG_LOG_BIT_OFF, | 
|  | __DEVKMSG_LOG_BIT_LOCK, | 
|  | }; | 
|  |  | 
|  | enum devkmsg_log_masks { | 
|  | DEVKMSG_LOG_MASK_ON             = BIT(__DEVKMSG_LOG_BIT_ON), | 
|  | DEVKMSG_LOG_MASK_OFF            = BIT(__DEVKMSG_LOG_BIT_OFF), | 
|  | DEVKMSG_LOG_MASK_LOCK           = BIT(__DEVKMSG_LOG_BIT_LOCK), | 
|  | }; | 
|  |  | 
|  | /* Keep both the 'on' and 'off' bits clear, i.e. ratelimit by default: */ | 
|  | #define DEVKMSG_LOG_MASK_DEFAULT	0 | 
|  |  | 
|  | static unsigned int __read_mostly devkmsg_log = DEVKMSG_LOG_MASK_DEFAULT; | 
|  |  | 
|  | static int __control_devkmsg(char *str) | 
|  | { | 
|  | if (!str) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!strncmp(str, "on", 2)) { | 
|  | devkmsg_log = DEVKMSG_LOG_MASK_ON; | 
|  | return 2; | 
|  | } else if (!strncmp(str, "off", 3)) { | 
|  | devkmsg_log = DEVKMSG_LOG_MASK_OFF; | 
|  | return 3; | 
|  | } else if (!strncmp(str, "ratelimit", 9)) { | 
|  | devkmsg_log = DEVKMSG_LOG_MASK_DEFAULT; | 
|  | return 9; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int __init control_devkmsg(char *str) | 
|  | { | 
|  | if (__control_devkmsg(str) < 0) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * Set sysctl string accordingly: | 
|  | */ | 
|  | if (devkmsg_log == DEVKMSG_LOG_MASK_ON) | 
|  | strcpy(devkmsg_log_str, "on"); | 
|  | else if (devkmsg_log == DEVKMSG_LOG_MASK_OFF) | 
|  | strcpy(devkmsg_log_str, "off"); | 
|  | /* else "ratelimit" which is set by default. */ | 
|  |  | 
|  | /* | 
|  | * Sysctl cannot change it anymore. The kernel command line setting of | 
|  | * this parameter is to force the setting to be permanent throughout the | 
|  | * runtime of the system. This is a precation measure against userspace | 
|  | * trying to be a smarta** and attempting to change it up on us. | 
|  | */ | 
|  | devkmsg_log |= DEVKMSG_LOG_MASK_LOCK; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | __setup("printk.devkmsg=", control_devkmsg); | 
|  |  | 
|  | char devkmsg_log_str[DEVKMSG_STR_MAX_SIZE] = "ratelimit"; | 
|  |  | 
|  | int devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write, | 
|  | void __user *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | char old_str[DEVKMSG_STR_MAX_SIZE]; | 
|  | unsigned int old; | 
|  | int err; | 
|  |  | 
|  | if (write) { | 
|  | if (devkmsg_log & DEVKMSG_LOG_MASK_LOCK) | 
|  | return -EINVAL; | 
|  |  | 
|  | old = devkmsg_log; | 
|  | strncpy(old_str, devkmsg_log_str, DEVKMSG_STR_MAX_SIZE); | 
|  | } | 
|  |  | 
|  | err = proc_dostring(table, write, buffer, lenp, ppos); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (write) { | 
|  | err = __control_devkmsg(devkmsg_log_str); | 
|  |  | 
|  | /* | 
|  | * Do not accept an unknown string OR a known string with | 
|  | * trailing crap... | 
|  | */ | 
|  | if (err < 0 || (err + 1 != *lenp)) { | 
|  |  | 
|  | /* ... and restore old setting. */ | 
|  | devkmsg_log = old; | 
|  | strncpy(devkmsg_log_str, old_str, DEVKMSG_STR_MAX_SIZE); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Number of registered extended console drivers. | 
|  | * | 
|  | * If extended consoles are present, in-kernel cont reassembly is disabled | 
|  | * and each fragment is stored as a separate log entry with proper | 
|  | * continuation flag so that every emitted message has full metadata.  This | 
|  | * doesn't change the result for regular consoles or /proc/kmsg.  For | 
|  | * /dev/kmsg, as long as the reader concatenates messages according to | 
|  | * consecutive continuation flags, the end result should be the same too. | 
|  | */ | 
|  | static int nr_ext_console_drivers; | 
|  |  | 
|  | /* | 
|  | * Helper macros to handle lockdep when locking/unlocking console_sem. We use | 
|  | * macros instead of functions so that _RET_IP_ contains useful information. | 
|  | */ | 
|  | #define down_console_sem() do { \ | 
|  | down(&console_sem);\ | 
|  | mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);\ | 
|  | } while (0) | 
|  |  | 
|  | static int __down_trylock_console_sem(unsigned long ip) | 
|  | { | 
|  | int lock_failed; | 
|  | unsigned long flags; | 
|  |  | 
|  | /* | 
|  | * Here and in __up_console_sem() we need to be in safe mode, | 
|  | * because spindump/WARN/etc from under console ->lock will | 
|  | * deadlock in printk()->down_trylock_console_sem() otherwise. | 
|  | */ | 
|  | printk_safe_enter_irqsave(flags); | 
|  | lock_failed = down_trylock(&console_sem); | 
|  | printk_safe_exit_irqrestore(flags); | 
|  |  | 
|  | if (lock_failed) | 
|  | return 1; | 
|  | mutex_acquire(&console_lock_dep_map, 0, 1, ip); | 
|  | return 0; | 
|  | } | 
|  | #define down_trylock_console_sem() __down_trylock_console_sem(_RET_IP_) | 
|  |  | 
|  | static void __up_console_sem(unsigned long ip) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | mutex_release(&console_lock_dep_map, 1, ip); | 
|  |  | 
|  | printk_safe_enter_irqsave(flags); | 
|  | up(&console_sem); | 
|  | printk_safe_exit_irqrestore(flags); | 
|  | } | 
|  | #define up_console_sem() __up_console_sem(_RET_IP_) | 
|  |  | 
|  | /* | 
|  | * This is used for debugging the mess that is the VT code by | 
|  | * keeping track if we have the console semaphore held. It's | 
|  | * definitely not the perfect debug tool (we don't know if _WE_ | 
|  | * hold it and are racing, but it helps tracking those weird code | 
|  | * paths in the console code where we end up in places I want | 
|  | * locked without the console sempahore held). | 
|  | */ | 
|  | static int console_locked, console_suspended; | 
|  |  | 
|  | /* | 
|  | * If exclusive_console is non-NULL then only this console is to be printed to. | 
|  | */ | 
|  | static struct console *exclusive_console; | 
|  |  | 
|  | /* | 
|  | *	Array of consoles built from command line options (console=) | 
|  | */ | 
|  |  | 
|  | #define MAX_CMDLINECONSOLES 8 | 
|  |  | 
|  | static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; | 
|  |  | 
|  | static int preferred_console = -1; | 
|  | int console_set_on_cmdline; | 
|  | EXPORT_SYMBOL(console_set_on_cmdline); | 
|  |  | 
|  | /* Flag: console code may call schedule() */ | 
|  | static int console_may_schedule; | 
|  |  | 
|  | enum con_msg_format_flags { | 
|  | MSG_FORMAT_DEFAULT	= 0, | 
|  | MSG_FORMAT_SYSLOG	= (1 << 0), | 
|  | }; | 
|  |  | 
|  | static int console_msg_format = MSG_FORMAT_DEFAULT; | 
|  |  | 
|  | /* | 
|  | * The printk log buffer consists of a chain of concatenated variable | 
|  | * length records. Every record starts with a record header, containing | 
|  | * the overall length of the record. | 
|  | * | 
|  | * The heads to the first and last entry in the buffer, as well as the | 
|  | * sequence numbers of these entries are maintained when messages are | 
|  | * stored. | 
|  | * | 
|  | * If the heads indicate available messages, the length in the header | 
|  | * tells the start next message. A length == 0 for the next message | 
|  | * indicates a wrap-around to the beginning of the buffer. | 
|  | * | 
|  | * Every record carries the monotonic timestamp in microseconds, as well as | 
|  | * the standard userspace syslog level and syslog facility. The usual | 
|  | * kernel messages use LOG_KERN; userspace-injected messages always carry | 
|  | * a matching syslog facility, by default LOG_USER. The origin of every | 
|  | * message can be reliably determined that way. | 
|  | * | 
|  | * The human readable log message directly follows the message header. The | 
|  | * length of the message text is stored in the header, the stored message | 
|  | * is not terminated. | 
|  | * | 
|  | * Optionally, a message can carry a dictionary of properties (key/value pairs), | 
|  | * to provide userspace with a machine-readable message context. | 
|  | * | 
|  | * Examples for well-defined, commonly used property names are: | 
|  | *   DEVICE=b12:8               device identifier | 
|  | *                                b12:8         block dev_t | 
|  | *                                c127:3        char dev_t | 
|  | *                                n8            netdev ifindex | 
|  | *                                +sound:card0  subsystem:devname | 
|  | *   SUBSYSTEM=pci              driver-core subsystem name | 
|  | * | 
|  | * Valid characters in property names are [a-zA-Z0-9.-_]. The plain text value | 
|  | * follows directly after a '=' character. Every property is terminated by | 
|  | * a '\0' character. The last property is not terminated. | 
|  | * | 
|  | * Example of a message structure: | 
|  | *   0000  ff 8f 00 00 00 00 00 00      monotonic time in nsec | 
|  | *   0008  34 00                        record is 52 bytes long | 
|  | *   000a        0b 00                  text is 11 bytes long | 
|  | *   000c              1f 00            dictionary is 23 bytes long | 
|  | *   000e                    03 00      LOG_KERN (facility) LOG_ERR (level) | 
|  | *   0010  69 74 27 73 20 61 20 6c      "it's a l" | 
|  | *         69 6e 65                     "ine" | 
|  | *   001b           44 45 56 49 43      "DEVIC" | 
|  | *         45 3d 62 38 3a 32 00 44      "E=b8:2\0D" | 
|  | *         52 49 56 45 52 3d 62 75      "RIVER=bu" | 
|  | *         67                           "g" | 
|  | *   0032     00 00 00                  padding to next message header | 
|  | * | 
|  | * The 'struct printk_log' buffer header must never be directly exported to | 
|  | * userspace, it is a kernel-private implementation detail that might | 
|  | * need to be changed in the future, when the requirements change. | 
|  | * | 
|  | * /dev/kmsg exports the structured data in the following line format: | 
|  | *   "<level>,<sequnum>,<timestamp>,<contflag>[,additional_values, ... ];<message text>\n" | 
|  | * | 
|  | * Users of the export format should ignore possible additional values | 
|  | * separated by ',', and find the message after the ';' character. | 
|  | * | 
|  | * The optional key/value pairs are attached as continuation lines starting | 
|  | * with a space character and terminated by a newline. All possible | 
|  | * non-prinatable characters are escaped in the "\xff" notation. | 
|  | */ | 
|  |  | 
|  | enum log_flags { | 
|  | LOG_NEWLINE	= 2,	/* text ended with a newline */ | 
|  | LOG_PREFIX	= 4,	/* text started with a prefix */ | 
|  | LOG_CONT	= 8,	/* text is a fragment of a continuation line */ | 
|  | }; | 
|  |  | 
|  | struct printk_log { | 
|  | u64 ts_nsec;		/* timestamp in nanoseconds */ | 
|  | u16 len;		/* length of entire record */ | 
|  | u16 text_len;		/* length of text buffer */ | 
|  | u16 dict_len;		/* length of dictionary buffer */ | 
|  | u8 facility;		/* syslog facility */ | 
|  | u8 flags:5;		/* internal record flags */ | 
|  | u8 level:3;		/* syslog level */ | 
|  | } | 
|  | #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS | 
|  | __packed __aligned(4) | 
|  | #endif | 
|  | ; | 
|  |  | 
|  | /* | 
|  | * The logbuf_lock protects kmsg buffer, indices, counters.  This can be taken | 
|  | * within the scheduler's rq lock. It must be released before calling | 
|  | * console_unlock() or anything else that might wake up a process. | 
|  | */ | 
|  | DEFINE_RAW_SPINLOCK(logbuf_lock); | 
|  |  | 
|  | /* | 
|  | * Helper macros to lock/unlock logbuf_lock and switch between | 
|  | * printk-safe/unsafe modes. | 
|  | */ | 
|  | #define logbuf_lock_irq()				\ | 
|  | do {						\ | 
|  | printk_safe_enter_irq();		\ | 
|  | raw_spin_lock(&logbuf_lock);		\ | 
|  | } while (0) | 
|  |  | 
|  | #define logbuf_unlock_irq()				\ | 
|  | do {						\ | 
|  | raw_spin_unlock(&logbuf_lock);		\ | 
|  | printk_safe_exit_irq();			\ | 
|  | } while (0) | 
|  |  | 
|  | #define logbuf_lock_irqsave(flags)			\ | 
|  | do {						\ | 
|  | printk_safe_enter_irqsave(flags);	\ | 
|  | raw_spin_lock(&logbuf_lock);		\ | 
|  | } while (0) | 
|  |  | 
|  | #define logbuf_unlock_irqrestore(flags)		\ | 
|  | do {						\ | 
|  | raw_spin_unlock(&logbuf_lock);		\ | 
|  | printk_safe_exit_irqrestore(flags);	\ | 
|  | } while (0) | 
|  |  | 
|  | #ifdef CONFIG_PRINTK | 
|  | DECLARE_WAIT_QUEUE_HEAD(log_wait); | 
|  | /* the next printk record to read by syslog(READ) or /proc/kmsg */ | 
|  | static u64 syslog_seq; | 
|  | static u32 syslog_idx; | 
|  | static size_t syslog_partial; | 
|  |  | 
|  | /* index and sequence number of the first record stored in the buffer */ | 
|  | static u64 log_first_seq; | 
|  | static u32 log_first_idx; | 
|  |  | 
|  | /* index and sequence number of the next record to store in the buffer */ | 
|  | static u64 log_next_seq; | 
|  | static u32 log_next_idx; | 
|  |  | 
|  | /* the next printk record to write to the console */ | 
|  | static u64 console_seq; | 
|  | static u32 console_idx; | 
|  |  | 
|  | /* the next printk record to read after the last 'clear' command */ | 
|  | static u64 clear_seq; | 
|  | static u32 clear_idx; | 
|  |  | 
|  | #define PREFIX_MAX		32 | 
|  | #define LOG_LINE_MAX		(1024 - PREFIX_MAX) | 
|  |  | 
|  | #define LOG_LEVEL(v)		((v) & 0x07) | 
|  | #define LOG_FACILITY(v)		((v) >> 3 & 0xff) | 
|  |  | 
|  | /* record buffer */ | 
|  | #define LOG_ALIGN __alignof__(struct printk_log) | 
|  | #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) | 
|  | static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN); | 
|  | static char *log_buf = __log_buf; | 
|  | static u32 log_buf_len = __LOG_BUF_LEN; | 
|  |  | 
|  | /* Return log buffer address */ | 
|  | char *log_buf_addr_get(void) | 
|  | { | 
|  | return log_buf; | 
|  | } | 
|  |  | 
|  | /* Return log buffer size */ | 
|  | u32 log_buf_len_get(void) | 
|  | { | 
|  | return log_buf_len; | 
|  | } | 
|  |  | 
|  | /* human readable text of the record */ | 
|  | static char *log_text(const struct printk_log *msg) | 
|  | { | 
|  | return (char *)msg + sizeof(struct printk_log); | 
|  | } | 
|  |  | 
|  | /* optional key/value pair dictionary attached to the record */ | 
|  | static char *log_dict(const struct printk_log *msg) | 
|  | { | 
|  | return (char *)msg + sizeof(struct printk_log) + msg->text_len; | 
|  | } | 
|  |  | 
|  | /* get record by index; idx must point to valid msg */ | 
|  | static struct printk_log *log_from_idx(u32 idx) | 
|  | { | 
|  | struct printk_log *msg = (struct printk_log *)(log_buf + idx); | 
|  |  | 
|  | /* | 
|  | * A length == 0 record is the end of buffer marker. Wrap around and | 
|  | * read the message at the start of the buffer. | 
|  | */ | 
|  | if (!msg->len) | 
|  | return (struct printk_log *)log_buf; | 
|  | return msg; | 
|  | } | 
|  |  | 
|  | /* get next record; idx must point to valid msg */ | 
|  | static u32 log_next(u32 idx) | 
|  | { | 
|  | struct printk_log *msg = (struct printk_log *)(log_buf + idx); | 
|  |  | 
|  | /* length == 0 indicates the end of the buffer; wrap */ | 
|  | /* | 
|  | * A length == 0 record is the end of buffer marker. Wrap around and | 
|  | * read the message at the start of the buffer as *this* one, and | 
|  | * return the one after that. | 
|  | */ | 
|  | if (!msg->len) { | 
|  | msg = (struct printk_log *)log_buf; | 
|  | return msg->len; | 
|  | } | 
|  | return idx + msg->len; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether there is enough free space for the given message. | 
|  | * | 
|  | * The same values of first_idx and next_idx mean that the buffer | 
|  | * is either empty or full. | 
|  | * | 
|  | * If the buffer is empty, we must respect the position of the indexes. | 
|  | * They cannot be reset to the beginning of the buffer. | 
|  | */ | 
|  | static int logbuf_has_space(u32 msg_size, bool empty) | 
|  | { | 
|  | u32 free; | 
|  |  | 
|  | if (log_next_idx > log_first_idx || empty) | 
|  | free = max(log_buf_len - log_next_idx, log_first_idx); | 
|  | else | 
|  | free = log_first_idx - log_next_idx; | 
|  |  | 
|  | /* | 
|  | * We need space also for an empty header that signalizes wrapping | 
|  | * of the buffer. | 
|  | */ | 
|  | return free >= msg_size + sizeof(struct printk_log); | 
|  | } | 
|  |  | 
|  | static int log_make_free_space(u32 msg_size) | 
|  | { | 
|  | while (log_first_seq < log_next_seq && | 
|  | !logbuf_has_space(msg_size, false)) { | 
|  | /* drop old messages until we have enough contiguous space */ | 
|  | log_first_idx = log_next(log_first_idx); | 
|  | log_first_seq++; | 
|  | } | 
|  |  | 
|  | if (clear_seq < log_first_seq) { | 
|  | clear_seq = log_first_seq; | 
|  | clear_idx = log_first_idx; | 
|  | } | 
|  |  | 
|  | /* sequence numbers are equal, so the log buffer is empty */ | 
|  | if (logbuf_has_space(msg_size, log_first_seq == log_next_seq)) | 
|  | return 0; | 
|  |  | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* compute the message size including the padding bytes */ | 
|  | static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len) | 
|  | { | 
|  | u32 size; | 
|  |  | 
|  | size = sizeof(struct printk_log) + text_len + dict_len; | 
|  | *pad_len = (-size) & (LOG_ALIGN - 1); | 
|  | size += *pad_len; | 
|  |  | 
|  | return size; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Define how much of the log buffer we could take at maximum. The value | 
|  | * must be greater than two. Note that only half of the buffer is available | 
|  | * when the index points to the middle. | 
|  | */ | 
|  | #define MAX_LOG_TAKE_PART 4 | 
|  | static const char trunc_msg[] = "<truncated>"; | 
|  |  | 
|  | static u32 truncate_msg(u16 *text_len, u16 *trunc_msg_len, | 
|  | u16 *dict_len, u32 *pad_len) | 
|  | { | 
|  | /* | 
|  | * The message should not take the whole buffer. Otherwise, it might | 
|  | * get removed too soon. | 
|  | */ | 
|  | u32 max_text_len = log_buf_len / MAX_LOG_TAKE_PART; | 
|  | if (*text_len > max_text_len) | 
|  | *text_len = max_text_len; | 
|  | /* enable the warning message */ | 
|  | *trunc_msg_len = strlen(trunc_msg); | 
|  | /* disable the "dict" completely */ | 
|  | *dict_len = 0; | 
|  | /* compute the size again, count also the warning message */ | 
|  | return msg_used_size(*text_len + *trunc_msg_len, 0, pad_len); | 
|  | } | 
|  |  | 
|  | /* insert record into the buffer, discard old ones, update heads */ | 
|  | static int log_store(int facility, int level, | 
|  | enum log_flags flags, u64 ts_nsec, | 
|  | const char *dict, u16 dict_len, | 
|  | const char *text, u16 text_len) | 
|  | { | 
|  | struct printk_log *msg; | 
|  | u32 size, pad_len; | 
|  | u16 trunc_msg_len = 0; | 
|  |  | 
|  | /* number of '\0' padding bytes to next message */ | 
|  | size = msg_used_size(text_len, dict_len, &pad_len); | 
|  |  | 
|  | if (log_make_free_space(size)) { | 
|  | /* truncate the message if it is too long for empty buffer */ | 
|  | size = truncate_msg(&text_len, &trunc_msg_len, | 
|  | &dict_len, &pad_len); | 
|  | /* survive when the log buffer is too small for trunc_msg */ | 
|  | if (log_make_free_space(size)) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (log_next_idx + size + sizeof(struct printk_log) > log_buf_len) { | 
|  | /* | 
|  | * This message + an additional empty header does not fit | 
|  | * at the end of the buffer. Add an empty header with len == 0 | 
|  | * to signify a wrap around. | 
|  | */ | 
|  | memset(log_buf + log_next_idx, 0, sizeof(struct printk_log)); | 
|  | log_next_idx = 0; | 
|  | } | 
|  |  | 
|  | /* fill message */ | 
|  | msg = (struct printk_log *)(log_buf + log_next_idx); | 
|  | memcpy(log_text(msg), text, text_len); | 
|  | msg->text_len = text_len; | 
|  | if (trunc_msg_len) { | 
|  | memcpy(log_text(msg) + text_len, trunc_msg, trunc_msg_len); | 
|  | msg->text_len += trunc_msg_len; | 
|  | } | 
|  | memcpy(log_dict(msg), dict, dict_len); | 
|  | msg->dict_len = dict_len; | 
|  | msg->facility = facility; | 
|  | msg->level = level & 7; | 
|  | msg->flags = flags & 0x1f; | 
|  | if (ts_nsec > 0) | 
|  | msg->ts_nsec = ts_nsec; | 
|  | else | 
|  | msg->ts_nsec = local_clock(); | 
|  | memset(log_dict(msg) + dict_len, 0, pad_len); | 
|  | msg->len = size; | 
|  |  | 
|  | /* insert message */ | 
|  | log_next_idx += msg->len; | 
|  | log_next_seq++; | 
|  |  | 
|  | return msg->text_len; | 
|  | } | 
|  |  | 
|  | int dmesg_restrict = IS_ENABLED(CONFIG_SECURITY_DMESG_RESTRICT); | 
|  |  | 
|  | static int syslog_action_restricted(int type) | 
|  | { | 
|  | if (dmesg_restrict) | 
|  | return 1; | 
|  | /* | 
|  | * Unless restricted, we allow "read all" and "get buffer size" | 
|  | * for everybody. | 
|  | */ | 
|  | return type != SYSLOG_ACTION_READ_ALL && | 
|  | type != SYSLOG_ACTION_SIZE_BUFFER; | 
|  | } | 
|  |  | 
|  | static int check_syslog_permissions(int type, int source) | 
|  | { | 
|  | /* | 
|  | * If this is from /proc/kmsg and we've already opened it, then we've | 
|  | * already done the capabilities checks at open time. | 
|  | */ | 
|  | if (source == SYSLOG_FROM_PROC && type != SYSLOG_ACTION_OPEN) | 
|  | goto ok; | 
|  |  | 
|  | if (syslog_action_restricted(type)) { | 
|  | if (capable(CAP_SYSLOG)) | 
|  | goto ok; | 
|  | /* | 
|  | * For historical reasons, accept CAP_SYS_ADMIN too, with | 
|  | * a warning. | 
|  | */ | 
|  | if (capable(CAP_SYS_ADMIN)) { | 
|  | pr_warn_once("%s (%d): Attempt to access syslog with " | 
|  | "CAP_SYS_ADMIN but no CAP_SYSLOG " | 
|  | "(deprecated).\n", | 
|  | current->comm, task_pid_nr(current)); | 
|  | goto ok; | 
|  | } | 
|  | return -EPERM; | 
|  | } | 
|  | ok: | 
|  | return security_syslog(type); | 
|  | } | 
|  |  | 
|  | static void append_char(char **pp, char *e, char c) | 
|  | { | 
|  | if (*pp < e) | 
|  | *(*pp)++ = c; | 
|  | } | 
|  |  | 
|  | static ssize_t msg_print_ext_header(char *buf, size_t size, | 
|  | struct printk_log *msg, u64 seq) | 
|  | { | 
|  | u64 ts_usec = msg->ts_nsec; | 
|  |  | 
|  | do_div(ts_usec, 1000); | 
|  |  | 
|  | return scnprintf(buf, size, "%u,%llu,%llu,%c;", | 
|  | (msg->facility << 3) | msg->level, seq, ts_usec, | 
|  | msg->flags & LOG_CONT ? 'c' : '-'); | 
|  | } | 
|  |  | 
|  | static ssize_t msg_print_ext_body(char *buf, size_t size, | 
|  | char *dict, size_t dict_len, | 
|  | char *text, size_t text_len) | 
|  | { | 
|  | char *p = buf, *e = buf + size; | 
|  | size_t i; | 
|  |  | 
|  | /* escape non-printable characters */ | 
|  | for (i = 0; i < text_len; i++) { | 
|  | unsigned char c = text[i]; | 
|  |  | 
|  | if (c < ' ' || c >= 127 || c == '\\') | 
|  | p += scnprintf(p, e - p, "\\x%02x", c); | 
|  | else | 
|  | append_char(&p, e, c); | 
|  | } | 
|  | append_char(&p, e, '\n'); | 
|  |  | 
|  | if (dict_len) { | 
|  | bool line = true; | 
|  |  | 
|  | for (i = 0; i < dict_len; i++) { | 
|  | unsigned char c = dict[i]; | 
|  |  | 
|  | if (line) { | 
|  | append_char(&p, e, ' '); | 
|  | line = false; | 
|  | } | 
|  |  | 
|  | if (c == '\0') { | 
|  | append_char(&p, e, '\n'); | 
|  | line = true; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (c < ' ' || c >= 127 || c == '\\') { | 
|  | p += scnprintf(p, e - p, "\\x%02x", c); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | append_char(&p, e, c); | 
|  | } | 
|  | append_char(&p, e, '\n'); | 
|  | } | 
|  |  | 
|  | return p - buf; | 
|  | } | 
|  |  | 
|  | /* /dev/kmsg - userspace message inject/listen interface */ | 
|  | struct devkmsg_user { | 
|  | u64 seq; | 
|  | u32 idx; | 
|  | struct ratelimit_state rs; | 
|  | struct mutex lock; | 
|  | char buf[CONSOLE_EXT_LOG_MAX]; | 
|  | }; | 
|  |  | 
|  | static ssize_t devkmsg_write(struct kiocb *iocb, struct iov_iter *from) | 
|  | { | 
|  | char *buf, *line; | 
|  | int level = default_message_loglevel; | 
|  | int facility = 1;	/* LOG_USER */ | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct devkmsg_user *user = file->private_data; | 
|  | size_t len = iov_iter_count(from); | 
|  | ssize_t ret = len; | 
|  |  | 
|  | if (!user || len > LOG_LINE_MAX) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Ignore when user logging is disabled. */ | 
|  | if (devkmsg_log & DEVKMSG_LOG_MASK_OFF) | 
|  | return len; | 
|  |  | 
|  | /* Ratelimit when not explicitly enabled. */ | 
|  | if (!(devkmsg_log & DEVKMSG_LOG_MASK_ON)) { | 
|  | if (!___ratelimit(&user->rs, current->comm)) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | buf = kmalloc(len+1, GFP_KERNEL); | 
|  | if (buf == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | buf[len] = '\0'; | 
|  | if (!copy_from_iter_full(buf, len, from)) { | 
|  | kfree(buf); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Extract and skip the syslog prefix <[0-9]*>. Coming from userspace | 
|  | * the decimal value represents 32bit, the lower 3 bit are the log | 
|  | * level, the rest are the log facility. | 
|  | * | 
|  | * If no prefix or no userspace facility is specified, we | 
|  | * enforce LOG_USER, to be able to reliably distinguish | 
|  | * kernel-generated messages from userspace-injected ones. | 
|  | */ | 
|  | line = buf; | 
|  | if (line[0] == '<') { | 
|  | char *endp = NULL; | 
|  | unsigned int u; | 
|  |  | 
|  | u = simple_strtoul(line + 1, &endp, 10); | 
|  | if (endp && endp[0] == '>') { | 
|  | level = LOG_LEVEL(u); | 
|  | if (LOG_FACILITY(u) != 0) | 
|  | facility = LOG_FACILITY(u); | 
|  | endp++; | 
|  | len -= endp - line; | 
|  | line = endp; | 
|  | } | 
|  | } | 
|  |  | 
|  | printk_emit(facility, level, NULL, 0, "%s", line); | 
|  | kfree(buf); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static ssize_t devkmsg_read(struct file *file, char __user *buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct devkmsg_user *user = file->private_data; | 
|  | struct printk_log *msg; | 
|  | size_t len; | 
|  | ssize_t ret; | 
|  |  | 
|  | if (!user) | 
|  | return -EBADF; | 
|  |  | 
|  | ret = mutex_lock_interruptible(&user->lock); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | logbuf_lock_irq(); | 
|  | while (user->seq == log_next_seq) { | 
|  | if (file->f_flags & O_NONBLOCK) { | 
|  | ret = -EAGAIN; | 
|  | logbuf_unlock_irq(); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | logbuf_unlock_irq(); | 
|  | ret = wait_event_interruptible(log_wait, | 
|  | user->seq != log_next_seq); | 
|  | if (ret) | 
|  | goto out; | 
|  | logbuf_lock_irq(); | 
|  | } | 
|  |  | 
|  | if (user->seq < log_first_seq) { | 
|  | /* our last seen message is gone, return error and reset */ | 
|  | user->idx = log_first_idx; | 
|  | user->seq = log_first_seq; | 
|  | ret = -EPIPE; | 
|  | logbuf_unlock_irq(); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | msg = log_from_idx(user->idx); | 
|  | len = msg_print_ext_header(user->buf, sizeof(user->buf), | 
|  | msg, user->seq); | 
|  | len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len, | 
|  | log_dict(msg), msg->dict_len, | 
|  | log_text(msg), msg->text_len); | 
|  |  | 
|  | user->idx = log_next(user->idx); | 
|  | user->seq++; | 
|  | logbuf_unlock_irq(); | 
|  |  | 
|  | if (len > count) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (copy_to_user(buf, user->buf, len)) { | 
|  | ret = -EFAULT; | 
|  | goto out; | 
|  | } | 
|  | ret = len; | 
|  | out: | 
|  | mutex_unlock(&user->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) | 
|  | { | 
|  | struct devkmsg_user *user = file->private_data; | 
|  | loff_t ret = 0; | 
|  |  | 
|  | if (!user) | 
|  | return -EBADF; | 
|  | if (offset) | 
|  | return -ESPIPE; | 
|  |  | 
|  | logbuf_lock_irq(); | 
|  | switch (whence) { | 
|  | case SEEK_SET: | 
|  | /* the first record */ | 
|  | user->idx = log_first_idx; | 
|  | user->seq = log_first_seq; | 
|  | break; | 
|  | case SEEK_DATA: | 
|  | /* | 
|  | * The first record after the last SYSLOG_ACTION_CLEAR, | 
|  | * like issued by 'dmesg -c'. Reading /dev/kmsg itself | 
|  | * changes no global state, and does not clear anything. | 
|  | */ | 
|  | user->idx = clear_idx; | 
|  | user->seq = clear_seq; | 
|  | break; | 
|  | case SEEK_END: | 
|  | /* after the last record */ | 
|  | user->idx = log_next_idx; | 
|  | user->seq = log_next_seq; | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  | logbuf_unlock_irq(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static __poll_t devkmsg_poll(struct file *file, poll_table *wait) | 
|  | { | 
|  | struct devkmsg_user *user = file->private_data; | 
|  | __poll_t ret = 0; | 
|  |  | 
|  | if (!user) | 
|  | return EPOLLERR|EPOLLNVAL; | 
|  |  | 
|  | poll_wait(file, &log_wait, wait); | 
|  |  | 
|  | logbuf_lock_irq(); | 
|  | if (user->seq < log_next_seq) { | 
|  | /* return error when data has vanished underneath us */ | 
|  | if (user->seq < log_first_seq) | 
|  | ret = EPOLLIN|EPOLLRDNORM|EPOLLERR|EPOLLPRI; | 
|  | else | 
|  | ret = EPOLLIN|EPOLLRDNORM; | 
|  | } | 
|  | logbuf_unlock_irq(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int devkmsg_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct devkmsg_user *user; | 
|  | int err; | 
|  |  | 
|  | if (devkmsg_log & DEVKMSG_LOG_MASK_OFF) | 
|  | return -EPERM; | 
|  |  | 
|  | /* write-only does not need any file context */ | 
|  | if ((file->f_flags & O_ACCMODE) != O_WRONLY) { | 
|  | err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL, | 
|  | SYSLOG_FROM_READER); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | user = kmalloc(sizeof(struct devkmsg_user), GFP_KERNEL); | 
|  | if (!user) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ratelimit_default_init(&user->rs); | 
|  | ratelimit_set_flags(&user->rs, RATELIMIT_MSG_ON_RELEASE); | 
|  |  | 
|  | mutex_init(&user->lock); | 
|  |  | 
|  | logbuf_lock_irq(); | 
|  | user->idx = log_first_idx; | 
|  | user->seq = log_first_seq; | 
|  | logbuf_unlock_irq(); | 
|  |  | 
|  | file->private_data = user; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int devkmsg_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct devkmsg_user *user = file->private_data; | 
|  |  | 
|  | if (!user) | 
|  | return 0; | 
|  |  | 
|  | ratelimit_state_exit(&user->rs); | 
|  |  | 
|  | mutex_destroy(&user->lock); | 
|  | kfree(user); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const struct file_operations kmsg_fops = { | 
|  | .open = devkmsg_open, | 
|  | .read = devkmsg_read, | 
|  | .write_iter = devkmsg_write, | 
|  | .llseek = devkmsg_llseek, | 
|  | .poll = devkmsg_poll, | 
|  | .release = devkmsg_release, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_CRASH_CORE | 
|  | /* | 
|  | * This appends the listed symbols to /proc/vmcore | 
|  | * | 
|  | * /proc/vmcore is used by various utilities, like crash and makedumpfile to | 
|  | * obtain access to symbols that are otherwise very difficult to locate.  These | 
|  | * symbols are specifically used so that utilities can access and extract the | 
|  | * dmesg log from a vmcore file after a crash. | 
|  | */ | 
|  | void log_buf_vmcoreinfo_setup(void) | 
|  | { | 
|  | VMCOREINFO_SYMBOL(log_buf); | 
|  | VMCOREINFO_SYMBOL(log_buf_len); | 
|  | VMCOREINFO_SYMBOL(log_first_idx); | 
|  | VMCOREINFO_SYMBOL(clear_idx); | 
|  | VMCOREINFO_SYMBOL(log_next_idx); | 
|  | /* | 
|  | * Export struct printk_log size and field offsets. User space tools can | 
|  | * parse it and detect any changes to structure down the line. | 
|  | */ | 
|  | VMCOREINFO_STRUCT_SIZE(printk_log); | 
|  | VMCOREINFO_OFFSET(printk_log, ts_nsec); | 
|  | VMCOREINFO_OFFSET(printk_log, len); | 
|  | VMCOREINFO_OFFSET(printk_log, text_len); | 
|  | VMCOREINFO_OFFSET(printk_log, dict_len); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* requested log_buf_len from kernel cmdline */ | 
|  | static unsigned long __initdata new_log_buf_len; | 
|  |  | 
|  | /* we practice scaling the ring buffer by powers of 2 */ | 
|  | static void __init log_buf_len_update(unsigned size) | 
|  | { | 
|  | if (size) | 
|  | size = roundup_pow_of_two(size); | 
|  | if (size > log_buf_len) | 
|  | new_log_buf_len = size; | 
|  | } | 
|  |  | 
|  | /* save requested log_buf_len since it's too early to process it */ | 
|  | static int __init log_buf_len_setup(char *str) | 
|  | { | 
|  | unsigned size = memparse(str, &str); | 
|  |  | 
|  | log_buf_len_update(size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | early_param("log_buf_len", log_buf_len_setup); | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | #define __LOG_CPU_MAX_BUF_LEN (1 << CONFIG_LOG_CPU_MAX_BUF_SHIFT) | 
|  |  | 
|  | static void __init log_buf_add_cpu(void) | 
|  | { | 
|  | unsigned int cpu_extra; | 
|  |  | 
|  | /* | 
|  | * archs should set up cpu_possible_bits properly with | 
|  | * set_cpu_possible() after setup_arch() but just in | 
|  | * case lets ensure this is valid. | 
|  | */ | 
|  | if (num_possible_cpus() == 1) | 
|  | return; | 
|  |  | 
|  | cpu_extra = (num_possible_cpus() - 1) * __LOG_CPU_MAX_BUF_LEN; | 
|  |  | 
|  | /* by default this will only continue through for large > 64 CPUs */ | 
|  | if (cpu_extra <= __LOG_BUF_LEN / 2) | 
|  | return; | 
|  |  | 
|  | pr_info("log_buf_len individual max cpu contribution: %d bytes\n", | 
|  | __LOG_CPU_MAX_BUF_LEN); | 
|  | pr_info("log_buf_len total cpu_extra contributions: %d bytes\n", | 
|  | cpu_extra); | 
|  | pr_info("log_buf_len min size: %d bytes\n", __LOG_BUF_LEN); | 
|  |  | 
|  | log_buf_len_update(cpu_extra + __LOG_BUF_LEN); | 
|  | } | 
|  | #else /* !CONFIG_SMP */ | 
|  | static inline void log_buf_add_cpu(void) {} | 
|  | #endif /* CONFIG_SMP */ | 
|  |  | 
|  | void __init setup_log_buf(int early) | 
|  | { | 
|  | unsigned long flags; | 
|  | char *new_log_buf; | 
|  | int free; | 
|  |  | 
|  | if (log_buf != __log_buf) | 
|  | return; | 
|  |  | 
|  | if (!early && !new_log_buf_len) | 
|  | log_buf_add_cpu(); | 
|  |  | 
|  | if (!new_log_buf_len) | 
|  | return; | 
|  |  | 
|  | if (early) { | 
|  | new_log_buf = | 
|  | memblock_virt_alloc(new_log_buf_len, LOG_ALIGN); | 
|  | } else { | 
|  | new_log_buf = memblock_virt_alloc_nopanic(new_log_buf_len, | 
|  | LOG_ALIGN); | 
|  | } | 
|  |  | 
|  | if (unlikely(!new_log_buf)) { | 
|  | pr_err("log_buf_len: %ld bytes not available\n", | 
|  | new_log_buf_len); | 
|  | return; | 
|  | } | 
|  |  | 
|  | logbuf_lock_irqsave(flags); | 
|  | log_buf_len = new_log_buf_len; | 
|  | log_buf = new_log_buf; | 
|  | new_log_buf_len = 0; | 
|  | free = __LOG_BUF_LEN - log_next_idx; | 
|  | memcpy(log_buf, __log_buf, __LOG_BUF_LEN); | 
|  | logbuf_unlock_irqrestore(flags); | 
|  |  | 
|  | pr_info("log_buf_len: %d bytes\n", log_buf_len); | 
|  | pr_info("early log buf free: %d(%d%%)\n", | 
|  | free, (free * 100) / __LOG_BUF_LEN); | 
|  | } | 
|  |  | 
|  | static bool __read_mostly ignore_loglevel; | 
|  |  | 
|  | static int __init ignore_loglevel_setup(char *str) | 
|  | { | 
|  | ignore_loglevel = true; | 
|  | pr_info("debug: ignoring loglevel setting.\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | early_param("ignore_loglevel", ignore_loglevel_setup); | 
|  | module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(ignore_loglevel, | 
|  | "ignore loglevel setting (prints all kernel messages to the console)"); | 
|  |  | 
|  | static bool suppress_message_printing(int level) | 
|  | { | 
|  | return (level >= console_loglevel && !ignore_loglevel); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_BOOT_PRINTK_DELAY | 
|  |  | 
|  | static int boot_delay; /* msecs delay after each printk during bootup */ | 
|  | static unsigned long long loops_per_msec;	/* based on boot_delay */ | 
|  |  | 
|  | static int __init boot_delay_setup(char *str) | 
|  | { | 
|  | unsigned long lpj; | 
|  |  | 
|  | lpj = preset_lpj ? preset_lpj : 1000000;	/* some guess */ | 
|  | loops_per_msec = (unsigned long long)lpj / 1000 * HZ; | 
|  |  | 
|  | get_option(&str, &boot_delay); | 
|  | if (boot_delay > 10 * 1000) | 
|  | boot_delay = 0; | 
|  |  | 
|  | pr_debug("boot_delay: %u, preset_lpj: %ld, lpj: %lu, " | 
|  | "HZ: %d, loops_per_msec: %llu\n", | 
|  | boot_delay, preset_lpj, lpj, HZ, loops_per_msec); | 
|  | return 0; | 
|  | } | 
|  | early_param("boot_delay", boot_delay_setup); | 
|  |  | 
|  | static void boot_delay_msec(int level) | 
|  | { | 
|  | unsigned long long k; | 
|  | unsigned long timeout; | 
|  |  | 
|  | if ((boot_delay == 0 || system_state >= SYSTEM_RUNNING) | 
|  | || suppress_message_printing(level)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | k = (unsigned long long)loops_per_msec * boot_delay; | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(boot_delay); | 
|  | while (k) { | 
|  | k--; | 
|  | cpu_relax(); | 
|  | /* | 
|  | * use (volatile) jiffies to prevent | 
|  | * compiler reduction; loop termination via jiffies | 
|  | * is secondary and may or may not happen. | 
|  | */ | 
|  | if (time_after(jiffies, timeout)) | 
|  | break; | 
|  | touch_nmi_watchdog(); | 
|  | } | 
|  | } | 
|  | #else | 
|  | static inline void boot_delay_msec(int level) | 
|  | { | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static bool printk_time = IS_ENABLED(CONFIG_PRINTK_TIME); | 
|  | module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR); | 
|  |  | 
|  | static size_t print_time(u64 ts, char *buf) | 
|  | { | 
|  | unsigned long rem_nsec; | 
|  |  | 
|  | if (!printk_time) | 
|  | return 0; | 
|  |  | 
|  | rem_nsec = do_div(ts, 1000000000); | 
|  |  | 
|  | if (!buf) | 
|  | return snprintf(NULL, 0, "[%5lu.000000] ", (unsigned long)ts); | 
|  |  | 
|  | return sprintf(buf, "[%5lu.%06lu] ", | 
|  | (unsigned long)ts, rem_nsec / 1000); | 
|  | } | 
|  |  | 
|  | static size_t print_prefix(const struct printk_log *msg, bool syslog, char *buf) | 
|  | { | 
|  | size_t len = 0; | 
|  | unsigned int prefix = (msg->facility << 3) | msg->level; | 
|  |  | 
|  | if (syslog) { | 
|  | if (buf) { | 
|  | len += sprintf(buf, "<%u>", prefix); | 
|  | } else { | 
|  | len += 3; | 
|  | if (prefix > 999) | 
|  | len += 3; | 
|  | else if (prefix > 99) | 
|  | len += 2; | 
|  | else if (prefix > 9) | 
|  | len++; | 
|  | } | 
|  | } | 
|  |  | 
|  | len += print_time(msg->ts_nsec, buf ? buf + len : NULL); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static size_t msg_print_text(const struct printk_log *msg, bool syslog, char *buf, size_t size) | 
|  | { | 
|  | const char *text = log_text(msg); | 
|  | size_t text_size = msg->text_len; | 
|  | size_t len = 0; | 
|  |  | 
|  | do { | 
|  | const char *next = memchr(text, '\n', text_size); | 
|  | size_t text_len; | 
|  |  | 
|  | if (next) { | 
|  | text_len = next - text; | 
|  | next++; | 
|  | text_size -= next - text; | 
|  | } else { | 
|  | text_len = text_size; | 
|  | } | 
|  |  | 
|  | if (buf) { | 
|  | if (print_prefix(msg, syslog, NULL) + | 
|  | text_len + 1 >= size - len) | 
|  | break; | 
|  |  | 
|  | len += print_prefix(msg, syslog, buf + len); | 
|  | memcpy(buf + len, text, text_len); | 
|  | len += text_len; | 
|  | buf[len++] = '\n'; | 
|  | } else { | 
|  | /* SYSLOG_ACTION_* buffer size only calculation */ | 
|  | len += print_prefix(msg, syslog, NULL); | 
|  | len += text_len; | 
|  | len++; | 
|  | } | 
|  |  | 
|  | text = next; | 
|  | } while (text); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int syslog_print(char __user *buf, int size) | 
|  | { | 
|  | char *text; | 
|  | struct printk_log *msg; | 
|  | int len = 0; | 
|  |  | 
|  | text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL); | 
|  | if (!text) | 
|  | return -ENOMEM; | 
|  |  | 
|  | while (size > 0) { | 
|  | size_t n; | 
|  | size_t skip; | 
|  |  | 
|  | logbuf_lock_irq(); | 
|  | if (syslog_seq < log_first_seq) { | 
|  | /* messages are gone, move to first one */ | 
|  | syslog_seq = log_first_seq; | 
|  | syslog_idx = log_first_idx; | 
|  | syslog_partial = 0; | 
|  | } | 
|  | if (syslog_seq == log_next_seq) { | 
|  | logbuf_unlock_irq(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | skip = syslog_partial; | 
|  | msg = log_from_idx(syslog_idx); | 
|  | n = msg_print_text(msg, true, text, LOG_LINE_MAX + PREFIX_MAX); | 
|  | if (n - syslog_partial <= size) { | 
|  | /* message fits into buffer, move forward */ | 
|  | syslog_idx = log_next(syslog_idx); | 
|  | syslog_seq++; | 
|  | n -= syslog_partial; | 
|  | syslog_partial = 0; | 
|  | } else if (!len){ | 
|  | /* partial read(), remember position */ | 
|  | n = size; | 
|  | syslog_partial += n; | 
|  | } else | 
|  | n = 0; | 
|  | logbuf_unlock_irq(); | 
|  |  | 
|  | if (!n) | 
|  | break; | 
|  |  | 
|  | if (copy_to_user(buf, text + skip, n)) { | 
|  | if (!len) | 
|  | len = -EFAULT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | len += n; | 
|  | size -= n; | 
|  | buf += n; | 
|  | } | 
|  |  | 
|  | kfree(text); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int syslog_print_all(char __user *buf, int size, bool clear) | 
|  | { | 
|  | char *text; | 
|  | int len = 0; | 
|  | u64 next_seq; | 
|  | u64 seq; | 
|  | u32 idx; | 
|  |  | 
|  | text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL); | 
|  | if (!text) | 
|  | return -ENOMEM; | 
|  |  | 
|  | logbuf_lock_irq(); | 
|  | /* | 
|  | * Find first record that fits, including all following records, | 
|  | * into the user-provided buffer for this dump. | 
|  | */ | 
|  | seq = clear_seq; | 
|  | idx = clear_idx; | 
|  | while (seq < log_next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  |  | 
|  | len += msg_print_text(msg, true, NULL, 0); | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  | } | 
|  |  | 
|  | /* move first record forward until length fits into the buffer */ | 
|  | seq = clear_seq; | 
|  | idx = clear_idx; | 
|  | while (len > size && seq < log_next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  |  | 
|  | len -= msg_print_text(msg, true, NULL, 0); | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  | } | 
|  |  | 
|  | /* last message fitting into this dump */ | 
|  | next_seq = log_next_seq; | 
|  |  | 
|  | len = 0; | 
|  | while (len >= 0 && seq < next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  | int textlen; | 
|  |  | 
|  | textlen = msg_print_text(msg, true, text, | 
|  | LOG_LINE_MAX + PREFIX_MAX); | 
|  | if (textlen < 0) { | 
|  | len = textlen; | 
|  | break; | 
|  | } | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  |  | 
|  | logbuf_unlock_irq(); | 
|  | if (copy_to_user(buf + len, text, textlen)) | 
|  | len = -EFAULT; | 
|  | else | 
|  | len += textlen; | 
|  | logbuf_lock_irq(); | 
|  |  | 
|  | if (seq < log_first_seq) { | 
|  | /* messages are gone, move to next one */ | 
|  | seq = log_first_seq; | 
|  | idx = log_first_idx; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (clear) { | 
|  | clear_seq = log_next_seq; | 
|  | clear_idx = log_next_idx; | 
|  | } | 
|  | logbuf_unlock_irq(); | 
|  |  | 
|  | kfree(text); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static void syslog_clear(void) | 
|  | { | 
|  | logbuf_lock_irq(); | 
|  | clear_seq = log_next_seq; | 
|  | clear_idx = log_next_idx; | 
|  | logbuf_unlock_irq(); | 
|  | } | 
|  |  | 
|  | int do_syslog(int type, char __user *buf, int len, int source) | 
|  | { | 
|  | bool clear = false; | 
|  | static int saved_console_loglevel = LOGLEVEL_DEFAULT; | 
|  | int error; | 
|  |  | 
|  | error = check_syslog_permissions(type, source); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | switch (type) { | 
|  | case SYSLOG_ACTION_CLOSE:	/* Close log */ | 
|  | break; | 
|  | case SYSLOG_ACTION_OPEN:	/* Open log */ | 
|  | break; | 
|  | case SYSLOG_ACTION_READ:	/* Read from log */ | 
|  | if (!buf || len < 0) | 
|  | return -EINVAL; | 
|  | if (!len) | 
|  | return 0; | 
|  | if (!access_ok(VERIFY_WRITE, buf, len)) | 
|  | return -EFAULT; | 
|  | error = wait_event_interruptible(log_wait, | 
|  | syslog_seq != log_next_seq); | 
|  | if (error) | 
|  | return error; | 
|  | error = syslog_print(buf, len); | 
|  | break; | 
|  | /* Read/clear last kernel messages */ | 
|  | case SYSLOG_ACTION_READ_CLEAR: | 
|  | clear = true; | 
|  | /* FALL THRU */ | 
|  | /* Read last kernel messages */ | 
|  | case SYSLOG_ACTION_READ_ALL: | 
|  | if (!buf || len < 0) | 
|  | return -EINVAL; | 
|  | if (!len) | 
|  | return 0; | 
|  | if (!access_ok(VERIFY_WRITE, buf, len)) | 
|  | return -EFAULT; | 
|  | error = syslog_print_all(buf, len, clear); | 
|  | break; | 
|  | /* Clear ring buffer */ | 
|  | case SYSLOG_ACTION_CLEAR: | 
|  | syslog_clear(); | 
|  | break; | 
|  | /* Disable logging to console */ | 
|  | case SYSLOG_ACTION_CONSOLE_OFF: | 
|  | if (saved_console_loglevel == LOGLEVEL_DEFAULT) | 
|  | saved_console_loglevel = console_loglevel; | 
|  | console_loglevel = minimum_console_loglevel; | 
|  | break; | 
|  | /* Enable logging to console */ | 
|  | case SYSLOG_ACTION_CONSOLE_ON: | 
|  | if (saved_console_loglevel != LOGLEVEL_DEFAULT) { | 
|  | console_loglevel = saved_console_loglevel; | 
|  | saved_console_loglevel = LOGLEVEL_DEFAULT; | 
|  | } | 
|  | break; | 
|  | /* Set level of messages printed to console */ | 
|  | case SYSLOG_ACTION_CONSOLE_LEVEL: | 
|  | if (len < 1 || len > 8) | 
|  | return -EINVAL; | 
|  | if (len < minimum_console_loglevel) | 
|  | len = minimum_console_loglevel; | 
|  | console_loglevel = len; | 
|  | /* Implicitly re-enable logging to console */ | 
|  | saved_console_loglevel = LOGLEVEL_DEFAULT; | 
|  | break; | 
|  | /* Number of chars in the log buffer */ | 
|  | case SYSLOG_ACTION_SIZE_UNREAD: | 
|  | logbuf_lock_irq(); | 
|  | if (syslog_seq < log_first_seq) { | 
|  | /* messages are gone, move to first one */ | 
|  | syslog_seq = log_first_seq; | 
|  | syslog_idx = log_first_idx; | 
|  | syslog_partial = 0; | 
|  | } | 
|  | if (source == SYSLOG_FROM_PROC) { | 
|  | /* | 
|  | * Short-cut for poll(/"proc/kmsg") which simply checks | 
|  | * for pending data, not the size; return the count of | 
|  | * records, not the length. | 
|  | */ | 
|  | error = log_next_seq - syslog_seq; | 
|  | } else { | 
|  | u64 seq = syslog_seq; | 
|  | u32 idx = syslog_idx; | 
|  |  | 
|  | while (seq < log_next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  |  | 
|  | error += msg_print_text(msg, true, NULL, 0); | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  | } | 
|  | error -= syslog_partial; | 
|  | } | 
|  | logbuf_unlock_irq(); | 
|  | break; | 
|  | /* Size of the log buffer */ | 
|  | case SYSLOG_ACTION_SIZE_BUFFER: | 
|  | error = log_buf_len; | 
|  | break; | 
|  | default: | 
|  | error = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) | 
|  | { | 
|  | return do_syslog(type, buf, len, SYSLOG_FROM_READER); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Special console_lock variants that help to reduce the risk of soft-lockups. | 
|  | * They allow to pass console_lock to another printk() call using a busy wait. | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_LOCKDEP | 
|  | static struct lockdep_map console_owner_dep_map = { | 
|  | .name = "console_owner" | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static DEFINE_RAW_SPINLOCK(console_owner_lock); | 
|  | static struct task_struct *console_owner; | 
|  | static bool console_waiter; | 
|  |  | 
|  | /** | 
|  | * console_lock_spinning_enable - mark beginning of code where another | 
|  | *	thread might safely busy wait | 
|  | * | 
|  | * This basically converts console_lock into a spinlock. This marks | 
|  | * the section where the console_lock owner can not sleep, because | 
|  | * there may be a waiter spinning (like a spinlock). Also it must be | 
|  | * ready to hand over the lock at the end of the section. | 
|  | */ | 
|  | static void console_lock_spinning_enable(void) | 
|  | { | 
|  | raw_spin_lock(&console_owner_lock); | 
|  | console_owner = current; | 
|  | raw_spin_unlock(&console_owner_lock); | 
|  |  | 
|  | /* The waiter may spin on us after setting console_owner */ | 
|  | spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * console_lock_spinning_disable_and_check - mark end of code where another | 
|  | *	thread was able to busy wait and check if there is a waiter | 
|  | * | 
|  | * This is called at the end of the section where spinning is allowed. | 
|  | * It has two functions. First, it is a signal that it is no longer | 
|  | * safe to start busy waiting for the lock. Second, it checks if | 
|  | * there is a busy waiter and passes the lock rights to her. | 
|  | * | 
|  | * Important: Callers lose the lock if there was a busy waiter. | 
|  | *	They must not touch items synchronized by console_lock | 
|  | *	in this case. | 
|  | * | 
|  | * Return: 1 if the lock rights were passed, 0 otherwise. | 
|  | */ | 
|  | static int console_lock_spinning_disable_and_check(void) | 
|  | { | 
|  | int waiter; | 
|  |  | 
|  | raw_spin_lock(&console_owner_lock); | 
|  | waiter = READ_ONCE(console_waiter); | 
|  | console_owner = NULL; | 
|  | raw_spin_unlock(&console_owner_lock); | 
|  |  | 
|  | if (!waiter) { | 
|  | spin_release(&console_owner_dep_map, 1, _THIS_IP_); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* The waiter is now free to continue */ | 
|  | WRITE_ONCE(console_waiter, false); | 
|  |  | 
|  | spin_release(&console_owner_dep_map, 1, _THIS_IP_); | 
|  |  | 
|  | /* | 
|  | * Hand off console_lock to waiter. The waiter will perform | 
|  | * the up(). After this, the waiter is the console_lock owner. | 
|  | */ | 
|  | mutex_release(&console_lock_dep_map, 1, _THIS_IP_); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * console_trylock_spinning - try to get console_lock by busy waiting | 
|  | * | 
|  | * This allows to busy wait for the console_lock when the current | 
|  | * owner is running in specially marked sections. It means that | 
|  | * the current owner is running and cannot reschedule until it | 
|  | * is ready to lose the lock. | 
|  | * | 
|  | * Return: 1 if we got the lock, 0 othrewise | 
|  | */ | 
|  | static int console_trylock_spinning(void) | 
|  | { | 
|  | struct task_struct *owner = NULL; | 
|  | bool waiter; | 
|  | bool spin = false; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (console_trylock()) | 
|  | return 1; | 
|  |  | 
|  | printk_safe_enter_irqsave(flags); | 
|  |  | 
|  | raw_spin_lock(&console_owner_lock); | 
|  | owner = READ_ONCE(console_owner); | 
|  | waiter = READ_ONCE(console_waiter); | 
|  | if (!waiter && owner && owner != current) { | 
|  | WRITE_ONCE(console_waiter, true); | 
|  | spin = true; | 
|  | } | 
|  | raw_spin_unlock(&console_owner_lock); | 
|  |  | 
|  | /* | 
|  | * If there is an active printk() writing to the | 
|  | * consoles, instead of having it write our data too, | 
|  | * see if we can offload that load from the active | 
|  | * printer, and do some printing ourselves. | 
|  | * Go into a spin only if there isn't already a waiter | 
|  | * spinning, and there is an active printer, and | 
|  | * that active printer isn't us (recursive printk?). | 
|  | */ | 
|  | if (!spin) { | 
|  | printk_safe_exit_irqrestore(flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* We spin waiting for the owner to release us */ | 
|  | spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_); | 
|  | /* Owner will clear console_waiter on hand off */ | 
|  | while (READ_ONCE(console_waiter)) | 
|  | cpu_relax(); | 
|  | spin_release(&console_owner_dep_map, 1, _THIS_IP_); | 
|  |  | 
|  | printk_safe_exit_irqrestore(flags); | 
|  | /* | 
|  | * The owner passed the console lock to us. | 
|  | * Since we did not spin on console lock, annotate | 
|  | * this as a trylock. Otherwise lockdep will | 
|  | * complain. | 
|  | */ | 
|  | mutex_acquire(&console_lock_dep_map, 0, 1, _THIS_IP_); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Call the console drivers, asking them to write out | 
|  | * log_buf[start] to log_buf[end - 1]. | 
|  | * The console_lock must be held. | 
|  | */ | 
|  | static void call_console_drivers(const char *ext_text, size_t ext_len, | 
|  | const char *text, size_t len) | 
|  | { | 
|  | struct console *con; | 
|  |  | 
|  | trace_console_rcuidle(text, len); | 
|  |  | 
|  | if (!console_drivers) | 
|  | return; | 
|  |  | 
|  | for_each_console(con) { | 
|  | if (exclusive_console && con != exclusive_console) | 
|  | continue; | 
|  | if (!(con->flags & CON_ENABLED)) | 
|  | continue; | 
|  | if (!con->write) | 
|  | continue; | 
|  | if (!cpu_online(smp_processor_id()) && | 
|  | !(con->flags & CON_ANYTIME)) | 
|  | continue; | 
|  | if (con->flags & CON_EXTENDED) | 
|  | con->write(con, ext_text, ext_len); | 
|  | else | 
|  | con->write(con, text, len); | 
|  | } | 
|  | } | 
|  |  | 
|  | int printk_delay_msec __read_mostly; | 
|  |  | 
|  | static inline void printk_delay(void) | 
|  | { | 
|  | if (unlikely(printk_delay_msec)) { | 
|  | int m = printk_delay_msec; | 
|  |  | 
|  | while (m--) { | 
|  | mdelay(1); | 
|  | touch_nmi_watchdog(); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Continuation lines are buffered, and not committed to the record buffer | 
|  | * until the line is complete, or a race forces it. The line fragments | 
|  | * though, are printed immediately to the consoles to ensure everything has | 
|  | * reached the console in case of a kernel crash. | 
|  | */ | 
|  | static struct cont { | 
|  | char buf[LOG_LINE_MAX]; | 
|  | size_t len;			/* length == 0 means unused buffer */ | 
|  | struct task_struct *owner;	/* task of first print*/ | 
|  | u64 ts_nsec;			/* time of first print */ | 
|  | u8 level;			/* log level of first message */ | 
|  | u8 facility;			/* log facility of first message */ | 
|  | enum log_flags flags;		/* prefix, newline flags */ | 
|  | } cont; | 
|  |  | 
|  | static void cont_flush(void) | 
|  | { | 
|  | if (cont.len == 0) | 
|  | return; | 
|  |  | 
|  | log_store(cont.facility, cont.level, cont.flags, cont.ts_nsec, | 
|  | NULL, 0, cont.buf, cont.len); | 
|  | cont.len = 0; | 
|  | } | 
|  |  | 
|  | static bool cont_add(int facility, int level, enum log_flags flags, const char *text, size_t len) | 
|  | { | 
|  | /* | 
|  | * If ext consoles are present, flush and skip in-kernel | 
|  | * continuation.  See nr_ext_console_drivers definition.  Also, if | 
|  | * the line gets too long, split it up in separate records. | 
|  | */ | 
|  | if (nr_ext_console_drivers || cont.len + len > sizeof(cont.buf)) { | 
|  | cont_flush(); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (!cont.len) { | 
|  | cont.facility = facility; | 
|  | cont.level = level; | 
|  | cont.owner = current; | 
|  | cont.ts_nsec = local_clock(); | 
|  | cont.flags = flags; | 
|  | } | 
|  |  | 
|  | memcpy(cont.buf + cont.len, text, len); | 
|  | cont.len += len; | 
|  |  | 
|  | // The original flags come from the first line, | 
|  | // but later continuations can add a newline. | 
|  | if (flags & LOG_NEWLINE) { | 
|  | cont.flags |= LOG_NEWLINE; | 
|  | cont_flush(); | 
|  | } | 
|  |  | 
|  | if (cont.len > (sizeof(cont.buf) * 80) / 100) | 
|  | cont_flush(); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static size_t log_output(int facility, int level, enum log_flags lflags, const char *dict, size_t dictlen, char *text, size_t text_len) | 
|  | { | 
|  | /* | 
|  | * If an earlier line was buffered, and we're a continuation | 
|  | * write from the same process, try to add it to the buffer. | 
|  | */ | 
|  | if (cont.len) { | 
|  | if (cont.owner == current && (lflags & LOG_CONT)) { | 
|  | if (cont_add(facility, level, lflags, text, text_len)) | 
|  | return text_len; | 
|  | } | 
|  | /* Otherwise, make sure it's flushed */ | 
|  | cont_flush(); | 
|  | } | 
|  |  | 
|  | /* Skip empty continuation lines that couldn't be added - they just flush */ | 
|  | if (!text_len && (lflags & LOG_CONT)) | 
|  | return 0; | 
|  |  | 
|  | /* If it doesn't end in a newline, try to buffer the current line */ | 
|  | if (!(lflags & LOG_NEWLINE)) { | 
|  | if (cont_add(facility, level, lflags, text, text_len)) | 
|  | return text_len; | 
|  | } | 
|  |  | 
|  | /* Store it in the record log */ | 
|  | return log_store(facility, level, lflags, 0, dict, dictlen, text, text_len); | 
|  | } | 
|  |  | 
|  | /* Must be called under logbuf_lock. */ | 
|  | int vprintk_store(int facility, int level, | 
|  | const char *dict, size_t dictlen, | 
|  | const char *fmt, va_list args) | 
|  | { | 
|  | static char textbuf[LOG_LINE_MAX]; | 
|  | char *text = textbuf; | 
|  | size_t text_len; | 
|  | enum log_flags lflags = 0; | 
|  |  | 
|  | /* | 
|  | * The printf needs to come first; we need the syslog | 
|  | * prefix which might be passed-in as a parameter. | 
|  | */ | 
|  | text_len = vscnprintf(text, sizeof(textbuf), fmt, args); | 
|  |  | 
|  | /* mark and strip a trailing newline */ | 
|  | if (text_len && text[text_len-1] == '\n') { | 
|  | text_len--; | 
|  | lflags |= LOG_NEWLINE; | 
|  | } | 
|  |  | 
|  | /* strip kernel syslog prefix and extract log level or control flags */ | 
|  | if (facility == 0) { | 
|  | int kern_level; | 
|  |  | 
|  | while ((kern_level = printk_get_level(text)) != 0) { | 
|  | switch (kern_level) { | 
|  | case '0' ... '7': | 
|  | if (level == LOGLEVEL_DEFAULT) | 
|  | level = kern_level - '0'; | 
|  | /* fallthrough */ | 
|  | case 'd':	/* KERN_DEFAULT */ | 
|  | lflags |= LOG_PREFIX; | 
|  | break; | 
|  | case 'c':	/* KERN_CONT */ | 
|  | lflags |= LOG_CONT; | 
|  | } | 
|  |  | 
|  | text_len -= 2; | 
|  | text += 2; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (level == LOGLEVEL_DEFAULT) | 
|  | level = default_message_loglevel; | 
|  |  | 
|  | if (dict) | 
|  | lflags |= LOG_PREFIX|LOG_NEWLINE; | 
|  |  | 
|  | return log_output(facility, level, lflags, | 
|  | dict, dictlen, text, text_len); | 
|  | } | 
|  |  | 
|  | asmlinkage int vprintk_emit(int facility, int level, | 
|  | const char *dict, size_t dictlen, | 
|  | const char *fmt, va_list args) | 
|  | { | 
|  | int printed_len; | 
|  | bool in_sched = false; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (level == LOGLEVEL_SCHED) { | 
|  | level = LOGLEVEL_DEFAULT; | 
|  | in_sched = true; | 
|  | } | 
|  |  | 
|  | boot_delay_msec(level); | 
|  | printk_delay(); | 
|  |  | 
|  | /* This stops the holder of console_sem just where we want him */ | 
|  | logbuf_lock_irqsave(flags); | 
|  | printed_len = vprintk_store(facility, level, dict, dictlen, fmt, args); | 
|  | logbuf_unlock_irqrestore(flags); | 
|  |  | 
|  | /* If called from the scheduler, we can not call up(). */ | 
|  | if (!in_sched) { | 
|  | /* | 
|  | * Disable preemption to avoid being preempted while holding | 
|  | * console_sem which would prevent anyone from printing to | 
|  | * console | 
|  | */ | 
|  | preempt_disable(); | 
|  | /* | 
|  | * Try to acquire and then immediately release the console | 
|  | * semaphore.  The release will print out buffers and wake up | 
|  | * /dev/kmsg and syslog() users. | 
|  | */ | 
|  | if (console_trylock_spinning()) | 
|  | console_unlock(); | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | wake_up_klogd(); | 
|  | return printed_len; | 
|  | } | 
|  | EXPORT_SYMBOL(vprintk_emit); | 
|  |  | 
|  | asmlinkage int vprintk(const char *fmt, va_list args) | 
|  | { | 
|  | return vprintk_func(fmt, args); | 
|  | } | 
|  | EXPORT_SYMBOL(vprintk); | 
|  |  | 
|  | asmlinkage int printk_emit(int facility, int level, | 
|  | const char *dict, size_t dictlen, | 
|  | const char *fmt, ...) | 
|  | { | 
|  | va_list args; | 
|  | int r; | 
|  |  | 
|  | va_start(args, fmt); | 
|  | r = vprintk_emit(facility, level, dict, dictlen, fmt, args); | 
|  | va_end(args); | 
|  |  | 
|  | return r; | 
|  | } | 
|  | EXPORT_SYMBOL(printk_emit); | 
|  |  | 
|  | int vprintk_default(const char *fmt, va_list args) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | #ifdef CONFIG_KGDB_KDB | 
|  | /* Allow to pass printk() to kdb but avoid a recursion. */ | 
|  | if (unlikely(kdb_trap_printk && kdb_printf_cpu < 0)) { | 
|  | r = vkdb_printf(KDB_MSGSRC_PRINTK, fmt, args); | 
|  | return r; | 
|  | } | 
|  | #endif | 
|  | r = vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args); | 
|  |  | 
|  | return r; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vprintk_default); | 
|  |  | 
|  | /** | 
|  | * printk - print a kernel message | 
|  | * @fmt: format string | 
|  | * | 
|  | * This is printk(). It can be called from any context. We want it to work. | 
|  | * | 
|  | * We try to grab the console_lock. If we succeed, it's easy - we log the | 
|  | * output and call the console drivers.  If we fail to get the semaphore, we | 
|  | * place the output into the log buffer and return. The current holder of | 
|  | * the console_sem will notice the new output in console_unlock(); and will | 
|  | * send it to the consoles before releasing the lock. | 
|  | * | 
|  | * One effect of this deferred printing is that code which calls printk() and | 
|  | * then changes console_loglevel may break. This is because console_loglevel | 
|  | * is inspected when the actual printing occurs. | 
|  | * | 
|  | * See also: | 
|  | * printf(3) | 
|  | * | 
|  | * See the vsnprintf() documentation for format string extensions over C99. | 
|  | */ | 
|  | asmlinkage __visible int printk(const char *fmt, ...) | 
|  | { | 
|  | va_list args; | 
|  | int r; | 
|  |  | 
|  | va_start(args, fmt); | 
|  | r = vprintk_func(fmt, args); | 
|  | va_end(args); | 
|  |  | 
|  | return r; | 
|  | } | 
|  | EXPORT_SYMBOL(printk); | 
|  |  | 
|  | #else /* CONFIG_PRINTK */ | 
|  |  | 
|  | #define LOG_LINE_MAX		0 | 
|  | #define PREFIX_MAX		0 | 
|  |  | 
|  | static u64 syslog_seq; | 
|  | static u32 syslog_idx; | 
|  | static u64 console_seq; | 
|  | static u32 console_idx; | 
|  | static u64 log_first_seq; | 
|  | static u32 log_first_idx; | 
|  | static u64 log_next_seq; | 
|  | static char *log_text(const struct printk_log *msg) { return NULL; } | 
|  | static char *log_dict(const struct printk_log *msg) { return NULL; } | 
|  | static struct printk_log *log_from_idx(u32 idx) { return NULL; } | 
|  | static u32 log_next(u32 idx) { return 0; } | 
|  | static ssize_t msg_print_ext_header(char *buf, size_t size, | 
|  | struct printk_log *msg, | 
|  | u64 seq) { return 0; } | 
|  | static ssize_t msg_print_ext_body(char *buf, size_t size, | 
|  | char *dict, size_t dict_len, | 
|  | char *text, size_t text_len) { return 0; } | 
|  | static void console_lock_spinning_enable(void) { } | 
|  | static int console_lock_spinning_disable_and_check(void) { return 0; } | 
|  | static void call_console_drivers(const char *ext_text, size_t ext_len, | 
|  | const char *text, size_t len) {} | 
|  | static size_t msg_print_text(const struct printk_log *msg, | 
|  | bool syslog, char *buf, size_t size) { return 0; } | 
|  | static bool suppress_message_printing(int level) { return false; } | 
|  |  | 
|  | #endif /* CONFIG_PRINTK */ | 
|  |  | 
|  | #ifdef CONFIG_EARLY_PRINTK | 
|  | struct console *early_console; | 
|  |  | 
|  | asmlinkage __visible void early_printk(const char *fmt, ...) | 
|  | { | 
|  | va_list ap; | 
|  | char buf[512]; | 
|  | int n; | 
|  |  | 
|  | if (!early_console) | 
|  | return; | 
|  |  | 
|  | va_start(ap, fmt); | 
|  | n = vscnprintf(buf, sizeof(buf), fmt, ap); | 
|  | va_end(ap); | 
|  |  | 
|  | early_console->write(early_console, buf, n); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int __add_preferred_console(char *name, int idx, char *options, | 
|  | char *brl_options) | 
|  | { | 
|  | struct console_cmdline *c; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | *	See if this tty is not yet registered, and | 
|  | *	if we have a slot free. | 
|  | */ | 
|  | for (i = 0, c = console_cmdline; | 
|  | i < MAX_CMDLINECONSOLES && c->name[0]; | 
|  | i++, c++) { | 
|  | if (strcmp(c->name, name) == 0 && c->index == idx) { | 
|  | if (!brl_options) | 
|  | preferred_console = i; | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | if (i == MAX_CMDLINECONSOLES) | 
|  | return -E2BIG; | 
|  | if (!brl_options) | 
|  | preferred_console = i; | 
|  | strlcpy(c->name, name, sizeof(c->name)); | 
|  | c->options = options; | 
|  | braille_set_options(c, brl_options); | 
|  |  | 
|  | c->index = idx; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init console_msg_format_setup(char *str) | 
|  | { | 
|  | if (!strcmp(str, "syslog")) | 
|  | console_msg_format = MSG_FORMAT_SYSLOG; | 
|  | if (!strcmp(str, "default")) | 
|  | console_msg_format = MSG_FORMAT_DEFAULT; | 
|  | return 1; | 
|  | } | 
|  | __setup("console_msg_format=", console_msg_format_setup); | 
|  |  | 
|  | /* | 
|  | * Set up a console.  Called via do_early_param() in init/main.c | 
|  | * for each "console=" parameter in the boot command line. | 
|  | */ | 
|  | static int __init console_setup(char *str) | 
|  | { | 
|  | char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for "ttyS" */ | 
|  | char *s, *options, *brl_options = NULL; | 
|  | int idx; | 
|  |  | 
|  | if (_braille_console_setup(&str, &brl_options)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * Decode str into name, index, options. | 
|  | */ | 
|  | if (str[0] >= '0' && str[0] <= '9') { | 
|  | strcpy(buf, "ttyS"); | 
|  | strncpy(buf + 4, str, sizeof(buf) - 5); | 
|  | } else { | 
|  | strncpy(buf, str, sizeof(buf) - 1); | 
|  | } | 
|  | buf[sizeof(buf) - 1] = 0; | 
|  | options = strchr(str, ','); | 
|  | if (options) | 
|  | *(options++) = 0; | 
|  | #ifdef __sparc__ | 
|  | if (!strcmp(str, "ttya")) | 
|  | strcpy(buf, "ttyS0"); | 
|  | if (!strcmp(str, "ttyb")) | 
|  | strcpy(buf, "ttyS1"); | 
|  | #endif | 
|  | for (s = buf; *s; s++) | 
|  | if (isdigit(*s) || *s == ',') | 
|  | break; | 
|  | idx = simple_strtoul(s, NULL, 10); | 
|  | *s = 0; | 
|  |  | 
|  | __add_preferred_console(buf, idx, options, brl_options); | 
|  | console_set_on_cmdline = 1; | 
|  | return 1; | 
|  | } | 
|  | __setup("console=", console_setup); | 
|  |  | 
|  | /** | 
|  | * add_preferred_console - add a device to the list of preferred consoles. | 
|  | * @name: device name | 
|  | * @idx: device index | 
|  | * @options: options for this console | 
|  | * | 
|  | * The last preferred console added will be used for kernel messages | 
|  | * and stdin/out/err for init.  Normally this is used by console_setup | 
|  | * above to handle user-supplied console arguments; however it can also | 
|  | * be used by arch-specific code either to override the user or more | 
|  | * commonly to provide a default console (ie from PROM variables) when | 
|  | * the user has not supplied one. | 
|  | */ | 
|  | int add_preferred_console(char *name, int idx, char *options) | 
|  | { | 
|  | return __add_preferred_console(name, idx, options, NULL); | 
|  | } | 
|  |  | 
|  | bool console_suspend_enabled = true; | 
|  | EXPORT_SYMBOL(console_suspend_enabled); | 
|  |  | 
|  | static int __init console_suspend_disable(char *str) | 
|  | { | 
|  | console_suspend_enabled = false; | 
|  | return 1; | 
|  | } | 
|  | __setup("no_console_suspend", console_suspend_disable); | 
|  | module_param_named(console_suspend, console_suspend_enabled, | 
|  | bool, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(console_suspend, "suspend console during suspend" | 
|  | " and hibernate operations"); | 
|  |  | 
|  | /** | 
|  | * suspend_console - suspend the console subsystem | 
|  | * | 
|  | * This disables printk() while we go into suspend states | 
|  | */ | 
|  | void suspend_console(void) | 
|  | { | 
|  | if (!console_suspend_enabled) | 
|  | return; | 
|  | pr_info("Suspending console(s) (use no_console_suspend to debug)\n"); | 
|  | console_lock(); | 
|  | console_suspended = 1; | 
|  | up_console_sem(); | 
|  | } | 
|  |  | 
|  | void resume_console(void) | 
|  | { | 
|  | if (!console_suspend_enabled) | 
|  | return; | 
|  | down_console_sem(); | 
|  | console_suspended = 0; | 
|  | console_unlock(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * console_cpu_notify - print deferred console messages after CPU hotplug | 
|  | * @cpu: unused | 
|  | * | 
|  | * If printk() is called from a CPU that is not online yet, the messages | 
|  | * will be printed on the console only if there are CON_ANYTIME consoles. | 
|  | * This function is called when a new CPU comes online (or fails to come | 
|  | * up) or goes offline. | 
|  | */ | 
|  | static int console_cpu_notify(unsigned int cpu) | 
|  | { | 
|  | if (!cpuhp_tasks_frozen) { | 
|  | /* If trylock fails, someone else is doing the printing */ | 
|  | if (console_trylock()) | 
|  | console_unlock(); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * console_lock - lock the console system for exclusive use. | 
|  | * | 
|  | * Acquires a lock which guarantees that the caller has | 
|  | * exclusive access to the console system and the console_drivers list. | 
|  | * | 
|  | * Can sleep, returns nothing. | 
|  | */ | 
|  | void console_lock(void) | 
|  | { | 
|  | might_sleep(); | 
|  |  | 
|  | down_console_sem(); | 
|  | if (console_suspended) | 
|  | return; | 
|  | console_locked = 1; | 
|  | console_may_schedule = 1; | 
|  | } | 
|  | EXPORT_SYMBOL(console_lock); | 
|  |  | 
|  | /** | 
|  | * console_trylock - try to lock the console system for exclusive use. | 
|  | * | 
|  | * Try to acquire a lock which guarantees that the caller has exclusive | 
|  | * access to the console system and the console_drivers list. | 
|  | * | 
|  | * returns 1 on success, and 0 on failure to acquire the lock. | 
|  | */ | 
|  | int console_trylock(void) | 
|  | { | 
|  | if (down_trylock_console_sem()) | 
|  | return 0; | 
|  | if (console_suspended) { | 
|  | up_console_sem(); | 
|  | return 0; | 
|  | } | 
|  | console_locked = 1; | 
|  | console_may_schedule = 0; | 
|  | return 1; | 
|  | } | 
|  | EXPORT_SYMBOL(console_trylock); | 
|  |  | 
|  | int is_console_locked(void) | 
|  | { | 
|  | return console_locked; | 
|  | } | 
|  | EXPORT_SYMBOL(is_console_locked); | 
|  |  | 
|  | /* | 
|  | * Check if we have any console that is capable of printing while cpu is | 
|  | * booting or shutting down. Requires console_sem. | 
|  | */ | 
|  | static int have_callable_console(void) | 
|  | { | 
|  | struct console *con; | 
|  |  | 
|  | for_each_console(con) | 
|  | if ((con->flags & CON_ENABLED) && | 
|  | (con->flags & CON_ANYTIME)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Can we actually use the console at this time on this cpu? | 
|  | * | 
|  | * Console drivers may assume that per-cpu resources have been allocated. So | 
|  | * unless they're explicitly marked as being able to cope (CON_ANYTIME) don't | 
|  | * call them until this CPU is officially up. | 
|  | */ | 
|  | static inline int can_use_console(void) | 
|  | { | 
|  | return cpu_online(raw_smp_processor_id()) || have_callable_console(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * console_unlock - unlock the console system | 
|  | * | 
|  | * Releases the console_lock which the caller holds on the console system | 
|  | * and the console driver list. | 
|  | * | 
|  | * While the console_lock was held, console output may have been buffered | 
|  | * by printk().  If this is the case, console_unlock(); emits | 
|  | * the output prior to releasing the lock. | 
|  | * | 
|  | * If there is output waiting, we wake /dev/kmsg and syslog() users. | 
|  | * | 
|  | * console_unlock(); may be called from any context. | 
|  | */ | 
|  | void console_unlock(void) | 
|  | { | 
|  | static char ext_text[CONSOLE_EXT_LOG_MAX]; | 
|  | static char text[LOG_LINE_MAX + PREFIX_MAX]; | 
|  | unsigned long flags; | 
|  | bool do_cond_resched, retry; | 
|  |  | 
|  | if (console_suspended) { | 
|  | up_console_sem(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Console drivers are called with interrupts disabled, so | 
|  | * @console_may_schedule should be cleared before; however, we may | 
|  | * end up dumping a lot of lines, for example, if called from | 
|  | * console registration path, and should invoke cond_resched() | 
|  | * between lines if allowable.  Not doing so can cause a very long | 
|  | * scheduling stall on a slow console leading to RCU stall and | 
|  | * softlockup warnings which exacerbate the issue with more | 
|  | * messages practically incapacitating the system. | 
|  | * | 
|  | * console_trylock() is not able to detect the preemptive | 
|  | * context reliably. Therefore the value must be stored before | 
|  | * and cleared after the the "again" goto label. | 
|  | */ | 
|  | do_cond_resched = console_may_schedule; | 
|  | again: | 
|  | console_may_schedule = 0; | 
|  |  | 
|  | /* | 
|  | * We released the console_sem lock, so we need to recheck if | 
|  | * cpu is online and (if not) is there at least one CON_ANYTIME | 
|  | * console. | 
|  | */ | 
|  | if (!can_use_console()) { | 
|  | console_locked = 0; | 
|  | up_console_sem(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (;;) { | 
|  | struct printk_log *msg; | 
|  | size_t ext_len = 0; | 
|  | size_t len; | 
|  |  | 
|  | printk_safe_enter_irqsave(flags); | 
|  | raw_spin_lock(&logbuf_lock); | 
|  | if (console_seq < log_first_seq) { | 
|  | len = sprintf(text, "** %u printk messages dropped **\n", | 
|  | (unsigned)(log_first_seq - console_seq)); | 
|  |  | 
|  | /* messages are gone, move to first one */ | 
|  | console_seq = log_first_seq; | 
|  | console_idx = log_first_idx; | 
|  | } else { | 
|  | len = 0; | 
|  | } | 
|  | skip: | 
|  | if (console_seq == log_next_seq) | 
|  | break; | 
|  |  | 
|  | msg = log_from_idx(console_idx); | 
|  | if (suppress_message_printing(msg->level)) { | 
|  | /* | 
|  | * Skip record we have buffered and already printed | 
|  | * directly to the console when we received it, and | 
|  | * record that has level above the console loglevel. | 
|  | */ | 
|  | console_idx = log_next(console_idx); | 
|  | console_seq++; | 
|  | goto skip; | 
|  | } | 
|  |  | 
|  | len += msg_print_text(msg, | 
|  | console_msg_format & MSG_FORMAT_SYSLOG, | 
|  | text + len, | 
|  | sizeof(text) - len); | 
|  | if (nr_ext_console_drivers) { | 
|  | ext_len = msg_print_ext_header(ext_text, | 
|  | sizeof(ext_text), | 
|  | msg, console_seq); | 
|  | ext_len += msg_print_ext_body(ext_text + ext_len, | 
|  | sizeof(ext_text) - ext_len, | 
|  | log_dict(msg), msg->dict_len, | 
|  | log_text(msg), msg->text_len); | 
|  | } | 
|  | console_idx = log_next(console_idx); | 
|  | console_seq++; | 
|  | raw_spin_unlock(&logbuf_lock); | 
|  |  | 
|  | /* | 
|  | * While actively printing out messages, if another printk() | 
|  | * were to occur on another CPU, it may wait for this one to | 
|  | * finish. This task can not be preempted if there is a | 
|  | * waiter waiting to take over. | 
|  | */ | 
|  | console_lock_spinning_enable(); | 
|  |  | 
|  | stop_critical_timings();	/* don't trace print latency */ | 
|  | call_console_drivers(ext_text, ext_len, text, len); | 
|  | start_critical_timings(); | 
|  |  | 
|  | if (console_lock_spinning_disable_and_check()) { | 
|  | printk_safe_exit_irqrestore(flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | printk_safe_exit_irqrestore(flags); | 
|  |  | 
|  | if (do_cond_resched) | 
|  | cond_resched(); | 
|  | } | 
|  |  | 
|  | console_locked = 0; | 
|  |  | 
|  | /* Release the exclusive_console once it is used */ | 
|  | if (unlikely(exclusive_console)) | 
|  | exclusive_console = NULL; | 
|  |  | 
|  | raw_spin_unlock(&logbuf_lock); | 
|  |  | 
|  | up_console_sem(); | 
|  |  | 
|  | /* | 
|  | * Someone could have filled up the buffer again, so re-check if there's | 
|  | * something to flush. In case we cannot trylock the console_sem again, | 
|  | * there's a new owner and the console_unlock() from them will do the | 
|  | * flush, no worries. | 
|  | */ | 
|  | raw_spin_lock(&logbuf_lock); | 
|  | retry = console_seq != log_next_seq; | 
|  | raw_spin_unlock(&logbuf_lock); | 
|  | printk_safe_exit_irqrestore(flags); | 
|  |  | 
|  | if (retry && console_trylock()) | 
|  | goto again; | 
|  | } | 
|  | EXPORT_SYMBOL(console_unlock); | 
|  |  | 
|  | /** | 
|  | * console_conditional_schedule - yield the CPU if required | 
|  | * | 
|  | * If the console code is currently allowed to sleep, and | 
|  | * if this CPU should yield the CPU to another task, do | 
|  | * so here. | 
|  | * | 
|  | * Must be called within console_lock();. | 
|  | */ | 
|  | void __sched console_conditional_schedule(void) | 
|  | { | 
|  | if (console_may_schedule) | 
|  | cond_resched(); | 
|  | } | 
|  | EXPORT_SYMBOL(console_conditional_schedule); | 
|  |  | 
|  | void console_unblank(void) | 
|  | { | 
|  | struct console *c; | 
|  |  | 
|  | /* | 
|  | * console_unblank can no longer be called in interrupt context unless | 
|  | * oops_in_progress is set to 1.. | 
|  | */ | 
|  | if (oops_in_progress) { | 
|  | if (down_trylock_console_sem() != 0) | 
|  | return; | 
|  | } else | 
|  | console_lock(); | 
|  |  | 
|  | console_locked = 1; | 
|  | console_may_schedule = 0; | 
|  | for_each_console(c) | 
|  | if ((c->flags & CON_ENABLED) && c->unblank) | 
|  | c->unblank(); | 
|  | console_unlock(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * console_flush_on_panic - flush console content on panic | 
|  | * | 
|  | * Immediately output all pending messages no matter what. | 
|  | */ | 
|  | void console_flush_on_panic(void) | 
|  | { | 
|  | /* | 
|  | * If someone else is holding the console lock, trylock will fail | 
|  | * and may_schedule may be set.  Ignore and proceed to unlock so | 
|  | * that messages are flushed out.  As this can be called from any | 
|  | * context and we don't want to get preempted while flushing, | 
|  | * ensure may_schedule is cleared. | 
|  | */ | 
|  | console_trylock(); | 
|  | console_may_schedule = 0; | 
|  | console_unlock(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the console tty driver structure and its associated index | 
|  | */ | 
|  | struct tty_driver *console_device(int *index) | 
|  | { | 
|  | struct console *c; | 
|  | struct tty_driver *driver = NULL; | 
|  |  | 
|  | console_lock(); | 
|  | for_each_console(c) { | 
|  | if (!c->device) | 
|  | continue; | 
|  | driver = c->device(c, index); | 
|  | if (driver) | 
|  | break; | 
|  | } | 
|  | console_unlock(); | 
|  | return driver; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Prevent further output on the passed console device so that (for example) | 
|  | * serial drivers can disable console output before suspending a port, and can | 
|  | * re-enable output afterwards. | 
|  | */ | 
|  | void console_stop(struct console *console) | 
|  | { | 
|  | console_lock(); | 
|  | console->flags &= ~CON_ENABLED; | 
|  | console_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(console_stop); | 
|  |  | 
|  | void console_start(struct console *console) | 
|  | { | 
|  | console_lock(); | 
|  | console->flags |= CON_ENABLED; | 
|  | console_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(console_start); | 
|  |  | 
|  | static int __read_mostly keep_bootcon; | 
|  |  | 
|  | static int __init keep_bootcon_setup(char *str) | 
|  | { | 
|  | keep_bootcon = 1; | 
|  | pr_info("debug: skip boot console de-registration.\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | early_param("keep_bootcon", keep_bootcon_setup); | 
|  |  | 
|  | /* | 
|  | * The console driver calls this routine during kernel initialization | 
|  | * to register the console printing procedure with printk() and to | 
|  | * print any messages that were printed by the kernel before the | 
|  | * console driver was initialized. | 
|  | * | 
|  | * This can happen pretty early during the boot process (because of | 
|  | * early_printk) - sometimes before setup_arch() completes - be careful | 
|  | * of what kernel features are used - they may not be initialised yet. | 
|  | * | 
|  | * There are two types of consoles - bootconsoles (early_printk) and | 
|  | * "real" consoles (everything which is not a bootconsole) which are | 
|  | * handled differently. | 
|  | *  - Any number of bootconsoles can be registered at any time. | 
|  | *  - As soon as a "real" console is registered, all bootconsoles | 
|  | *    will be unregistered automatically. | 
|  | *  - Once a "real" console is registered, any attempt to register a | 
|  | *    bootconsoles will be rejected | 
|  | */ | 
|  | void register_console(struct console *newcon) | 
|  | { | 
|  | int i; | 
|  | unsigned long flags; | 
|  | struct console *bcon = NULL; | 
|  | struct console_cmdline *c; | 
|  | static bool has_preferred; | 
|  |  | 
|  | if (console_drivers) | 
|  | for_each_console(bcon) | 
|  | if (WARN(bcon == newcon, | 
|  | "console '%s%d' already registered\n", | 
|  | bcon->name, bcon->index)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * before we register a new CON_BOOT console, make sure we don't | 
|  | * already have a valid console | 
|  | */ | 
|  | if (console_drivers && newcon->flags & CON_BOOT) { | 
|  | /* find the last or real console */ | 
|  | for_each_console(bcon) { | 
|  | if (!(bcon->flags & CON_BOOT)) { | 
|  | pr_info("Too late to register bootconsole %s%d\n", | 
|  | newcon->name, newcon->index); | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (console_drivers && console_drivers->flags & CON_BOOT) | 
|  | bcon = console_drivers; | 
|  |  | 
|  | if (!has_preferred || bcon || !console_drivers) | 
|  | has_preferred = preferred_console >= 0; | 
|  |  | 
|  | /* | 
|  | *	See if we want to use this console driver. If we | 
|  | *	didn't select a console we take the first one | 
|  | *	that registers here. | 
|  | */ | 
|  | if (!has_preferred) { | 
|  | if (newcon->index < 0) | 
|  | newcon->index = 0; | 
|  | if (newcon->setup == NULL || | 
|  | newcon->setup(newcon, NULL) == 0) { | 
|  | newcon->flags |= CON_ENABLED; | 
|  | if (newcon->device) { | 
|  | newcon->flags |= CON_CONSDEV; | 
|  | has_preferred = true; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	See if this console matches one we selected on | 
|  | *	the command line. | 
|  | */ | 
|  | for (i = 0, c = console_cmdline; | 
|  | i < MAX_CMDLINECONSOLES && c->name[0]; | 
|  | i++, c++) { | 
|  | if (!newcon->match || | 
|  | newcon->match(newcon, c->name, c->index, c->options) != 0) { | 
|  | /* default matching */ | 
|  | BUILD_BUG_ON(sizeof(c->name) != sizeof(newcon->name)); | 
|  | if (strcmp(c->name, newcon->name) != 0) | 
|  | continue; | 
|  | if (newcon->index >= 0 && | 
|  | newcon->index != c->index) | 
|  | continue; | 
|  | if (newcon->index < 0) | 
|  | newcon->index = c->index; | 
|  |  | 
|  | if (_braille_register_console(newcon, c)) | 
|  | return; | 
|  |  | 
|  | if (newcon->setup && | 
|  | newcon->setup(newcon, c->options) != 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | newcon->flags |= CON_ENABLED; | 
|  | if (i == preferred_console) { | 
|  | newcon->flags |= CON_CONSDEV; | 
|  | has_preferred = true; | 
|  | } | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!(newcon->flags & CON_ENABLED)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * If we have a bootconsole, and are switching to a real console, | 
|  | * don't print everything out again, since when the boot console, and | 
|  | * the real console are the same physical device, it's annoying to | 
|  | * see the beginning boot messages twice | 
|  | */ | 
|  | if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) | 
|  | newcon->flags &= ~CON_PRINTBUFFER; | 
|  |  | 
|  | /* | 
|  | *	Put this console in the list - keep the | 
|  | *	preferred driver at the head of the list. | 
|  | */ | 
|  | console_lock(); | 
|  | if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) { | 
|  | newcon->next = console_drivers; | 
|  | console_drivers = newcon; | 
|  | if (newcon->next) | 
|  | newcon->next->flags &= ~CON_CONSDEV; | 
|  | } else { | 
|  | newcon->next = console_drivers->next; | 
|  | console_drivers->next = newcon; | 
|  | } | 
|  |  | 
|  | if (newcon->flags & CON_EXTENDED) | 
|  | if (!nr_ext_console_drivers++) | 
|  | pr_info("printk: continuation disabled due to ext consoles, expect more fragments in /dev/kmsg\n"); | 
|  |  | 
|  | if (newcon->flags & CON_PRINTBUFFER) { | 
|  | /* | 
|  | * console_unlock(); will print out the buffered messages | 
|  | * for us. | 
|  | */ | 
|  | logbuf_lock_irqsave(flags); | 
|  | console_seq = syslog_seq; | 
|  | console_idx = syslog_idx; | 
|  | logbuf_unlock_irqrestore(flags); | 
|  | /* | 
|  | * We're about to replay the log buffer.  Only do this to the | 
|  | * just-registered console to avoid excessive message spam to | 
|  | * the already-registered consoles. | 
|  | */ | 
|  | exclusive_console = newcon; | 
|  | } | 
|  | console_unlock(); | 
|  | console_sysfs_notify(); | 
|  |  | 
|  | /* | 
|  | * By unregistering the bootconsoles after we enable the real console | 
|  | * we get the "console xxx enabled" message on all the consoles - | 
|  | * boot consoles, real consoles, etc - this is to ensure that end | 
|  | * users know there might be something in the kernel's log buffer that | 
|  | * went to the bootconsole (that they do not see on the real console) | 
|  | */ | 
|  | pr_info("%sconsole [%s%d] enabled\n", | 
|  | (newcon->flags & CON_BOOT) ? "boot" : "" , | 
|  | newcon->name, newcon->index); | 
|  | if (bcon && | 
|  | ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) && | 
|  | !keep_bootcon) { | 
|  | /* We need to iterate through all boot consoles, to make | 
|  | * sure we print everything out, before we unregister them. | 
|  | */ | 
|  | for_each_console(bcon) | 
|  | if (bcon->flags & CON_BOOT) | 
|  | unregister_console(bcon); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(register_console); | 
|  |  | 
|  | int unregister_console(struct console *console) | 
|  | { | 
|  | struct console *a, *b; | 
|  | int res; | 
|  |  | 
|  | pr_info("%sconsole [%s%d] disabled\n", | 
|  | (console->flags & CON_BOOT) ? "boot" : "" , | 
|  | console->name, console->index); | 
|  |  | 
|  | res = _braille_unregister_console(console); | 
|  | if (res) | 
|  | return res; | 
|  |  | 
|  | res = 1; | 
|  | console_lock(); | 
|  | if (console_drivers == console) { | 
|  | console_drivers=console->next; | 
|  | res = 0; | 
|  | } else if (console_drivers) { | 
|  | for (a=console_drivers->next, b=console_drivers ; | 
|  | a; b=a, a=b->next) { | 
|  | if (a == console) { | 
|  | b->next = a->next; | 
|  | res = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!res && (console->flags & CON_EXTENDED)) | 
|  | nr_ext_console_drivers--; | 
|  |  | 
|  | /* | 
|  | * If this isn't the last console and it has CON_CONSDEV set, we | 
|  | * need to set it on the next preferred console. | 
|  | */ | 
|  | if (console_drivers != NULL && console->flags & CON_CONSDEV) | 
|  | console_drivers->flags |= CON_CONSDEV; | 
|  |  | 
|  | console->flags &= ~CON_ENABLED; | 
|  | console_unlock(); | 
|  | console_sysfs_notify(); | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL(unregister_console); | 
|  |  | 
|  | /* | 
|  | * Initialize the console device. This is called *early*, so | 
|  | * we can't necessarily depend on lots of kernel help here. | 
|  | * Just do some early initializations, and do the complex setup | 
|  | * later. | 
|  | */ | 
|  | void __init console_init(void) | 
|  | { | 
|  | int ret; | 
|  | initcall_t call; | 
|  | initcall_entry_t *ce; | 
|  |  | 
|  | /* Setup the default TTY line discipline. */ | 
|  | n_tty_init(); | 
|  |  | 
|  | /* | 
|  | * set up the console device so that later boot sequences can | 
|  | * inform about problems etc.. | 
|  | */ | 
|  | ce = __con_initcall_start; | 
|  | trace_initcall_level("console"); | 
|  | while (ce < __con_initcall_end) { | 
|  | call = initcall_from_entry(ce); | 
|  | trace_initcall_start(call); | 
|  | ret = call(); | 
|  | trace_initcall_finish(call, ret); | 
|  | ce++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Some boot consoles access data that is in the init section and which will | 
|  | * be discarded after the initcalls have been run. To make sure that no code | 
|  | * will access this data, unregister the boot consoles in a late initcall. | 
|  | * | 
|  | * If for some reason, such as deferred probe or the driver being a loadable | 
|  | * module, the real console hasn't registered yet at this point, there will | 
|  | * be a brief interval in which no messages are logged to the console, which | 
|  | * makes it difficult to diagnose problems that occur during this time. | 
|  | * | 
|  | * To mitigate this problem somewhat, only unregister consoles whose memory | 
|  | * intersects with the init section. Note that all other boot consoles will | 
|  | * get unregistred when the real preferred console is registered. | 
|  | */ | 
|  | static int __init printk_late_init(void) | 
|  | { | 
|  | struct console *con; | 
|  | int ret; | 
|  |  | 
|  | for_each_console(con) { | 
|  | if (!(con->flags & CON_BOOT)) | 
|  | continue; | 
|  |  | 
|  | /* Check addresses that might be used for enabled consoles. */ | 
|  | if (init_section_intersects(con, sizeof(*con)) || | 
|  | init_section_contains(con->write, 0) || | 
|  | init_section_contains(con->read, 0) || | 
|  | init_section_contains(con->device, 0) || | 
|  | init_section_contains(con->unblank, 0) || | 
|  | init_section_contains(con->data, 0)) { | 
|  | /* | 
|  | * Please, consider moving the reported consoles out | 
|  | * of the init section. | 
|  | */ | 
|  | pr_warn("bootconsole [%s%d] uses init memory and must be disabled even before the real one is ready\n", | 
|  | con->name, con->index); | 
|  | unregister_console(con); | 
|  | } | 
|  | } | 
|  | ret = cpuhp_setup_state_nocalls(CPUHP_PRINTK_DEAD, "printk:dead", NULL, | 
|  | console_cpu_notify); | 
|  | WARN_ON(ret < 0); | 
|  | ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "printk:online", | 
|  | console_cpu_notify, NULL); | 
|  | WARN_ON(ret < 0); | 
|  | return 0; | 
|  | } | 
|  | late_initcall(printk_late_init); | 
|  |  | 
|  | #if defined CONFIG_PRINTK | 
|  | /* | 
|  | * Delayed printk version, for scheduler-internal messages: | 
|  | */ | 
|  | #define PRINTK_PENDING_WAKEUP	0x01 | 
|  | #define PRINTK_PENDING_OUTPUT	0x02 | 
|  |  | 
|  | static DEFINE_PER_CPU(int, printk_pending); | 
|  |  | 
|  | static void wake_up_klogd_work_func(struct irq_work *irq_work) | 
|  | { | 
|  | int pending = __this_cpu_xchg(printk_pending, 0); | 
|  |  | 
|  | if (pending & PRINTK_PENDING_OUTPUT) { | 
|  | /* If trylock fails, someone else is doing the printing */ | 
|  | if (console_trylock()) | 
|  | console_unlock(); | 
|  | } | 
|  |  | 
|  | if (pending & PRINTK_PENDING_WAKEUP) | 
|  | wake_up_interruptible(&log_wait); | 
|  | } | 
|  |  | 
|  | static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = { | 
|  | .func = wake_up_klogd_work_func, | 
|  | .flags = IRQ_WORK_LAZY, | 
|  | }; | 
|  |  | 
|  | void wake_up_klogd(void) | 
|  | { | 
|  | preempt_disable(); | 
|  | if (waitqueue_active(&log_wait)) { | 
|  | this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP); | 
|  | irq_work_queue(this_cpu_ptr(&wake_up_klogd_work)); | 
|  | } | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | void defer_console_output(void) | 
|  | { | 
|  | preempt_disable(); | 
|  | __this_cpu_or(printk_pending, PRINTK_PENDING_OUTPUT); | 
|  | irq_work_queue(this_cpu_ptr(&wake_up_klogd_work)); | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | int vprintk_deferred(const char *fmt, va_list args) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, 0, fmt, args); | 
|  | defer_console_output(); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | int printk_deferred(const char *fmt, ...) | 
|  | { | 
|  | va_list args; | 
|  | int r; | 
|  |  | 
|  | va_start(args, fmt); | 
|  | r = vprintk_deferred(fmt, args); | 
|  | va_end(args); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * printk rate limiting, lifted from the networking subsystem. | 
|  | * | 
|  | * This enforces a rate limit: not more than 10 kernel messages | 
|  | * every 5s to make a denial-of-service attack impossible. | 
|  | */ | 
|  | DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); | 
|  |  | 
|  | int __printk_ratelimit(const char *func) | 
|  | { | 
|  | return ___ratelimit(&printk_ratelimit_state, func); | 
|  | } | 
|  | EXPORT_SYMBOL(__printk_ratelimit); | 
|  |  | 
|  | /** | 
|  | * printk_timed_ratelimit - caller-controlled printk ratelimiting | 
|  | * @caller_jiffies: pointer to caller's state | 
|  | * @interval_msecs: minimum interval between prints | 
|  | * | 
|  | * printk_timed_ratelimit() returns true if more than @interval_msecs | 
|  | * milliseconds have elapsed since the last time printk_timed_ratelimit() | 
|  | * returned true. | 
|  | */ | 
|  | bool printk_timed_ratelimit(unsigned long *caller_jiffies, | 
|  | unsigned int interval_msecs) | 
|  | { | 
|  | unsigned long elapsed = jiffies - *caller_jiffies; | 
|  |  | 
|  | if (*caller_jiffies && elapsed <= msecs_to_jiffies(interval_msecs)) | 
|  | return false; | 
|  |  | 
|  | *caller_jiffies = jiffies; | 
|  | return true; | 
|  | } | 
|  | EXPORT_SYMBOL(printk_timed_ratelimit); | 
|  |  | 
|  | static DEFINE_SPINLOCK(dump_list_lock); | 
|  | static LIST_HEAD(dump_list); | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_register - register a kernel log dumper. | 
|  | * @dumper: pointer to the kmsg_dumper structure | 
|  | * | 
|  | * Adds a kernel log dumper to the system. The dump callback in the | 
|  | * structure will be called when the kernel oopses or panics and must be | 
|  | * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise. | 
|  | */ | 
|  | int kmsg_dump_register(struct kmsg_dumper *dumper) | 
|  | { | 
|  | unsigned long flags; | 
|  | int err = -EBUSY; | 
|  |  | 
|  | /* The dump callback needs to be set */ | 
|  | if (!dumper->dump) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&dump_list_lock, flags); | 
|  | /* Don't allow registering multiple times */ | 
|  | if (!dumper->registered) { | 
|  | dumper->registered = 1; | 
|  | list_add_tail_rcu(&dumper->list, &dump_list); | 
|  | err = 0; | 
|  | } | 
|  | spin_unlock_irqrestore(&dump_list_lock, flags); | 
|  |  | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(kmsg_dump_register); | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_unregister - unregister a kmsg dumper. | 
|  | * @dumper: pointer to the kmsg_dumper structure | 
|  | * | 
|  | * Removes a dump device from the system. Returns zero on success and | 
|  | * %-EINVAL otherwise. | 
|  | */ | 
|  | int kmsg_dump_unregister(struct kmsg_dumper *dumper) | 
|  | { | 
|  | unsigned long flags; | 
|  | int err = -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&dump_list_lock, flags); | 
|  | if (dumper->registered) { | 
|  | dumper->registered = 0; | 
|  | list_del_rcu(&dumper->list); | 
|  | err = 0; | 
|  | } | 
|  | spin_unlock_irqrestore(&dump_list_lock, flags); | 
|  | synchronize_rcu(); | 
|  |  | 
|  | return err; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(kmsg_dump_unregister); | 
|  |  | 
|  | static bool always_kmsg_dump; | 
|  | module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR); | 
|  |  | 
|  | /** | 
|  | * kmsg_dump - dump kernel log to kernel message dumpers. | 
|  | * @reason: the reason (oops, panic etc) for dumping | 
|  | * | 
|  | * Call each of the registered dumper's dump() callback, which can | 
|  | * retrieve the kmsg records with kmsg_dump_get_line() or | 
|  | * kmsg_dump_get_buffer(). | 
|  | */ | 
|  | void kmsg_dump(enum kmsg_dump_reason reason) | 
|  | { | 
|  | struct kmsg_dumper *dumper; | 
|  | unsigned long flags; | 
|  |  | 
|  | if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump) | 
|  | return; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(dumper, &dump_list, list) { | 
|  | if (dumper->max_reason && reason > dumper->max_reason) | 
|  | continue; | 
|  |  | 
|  | /* initialize iterator with data about the stored records */ | 
|  | dumper->active = true; | 
|  |  | 
|  | logbuf_lock_irqsave(flags); | 
|  | dumper->cur_seq = clear_seq; | 
|  | dumper->cur_idx = clear_idx; | 
|  | dumper->next_seq = log_next_seq; | 
|  | dumper->next_idx = log_next_idx; | 
|  | logbuf_unlock_irqrestore(flags); | 
|  |  | 
|  | /* invoke dumper which will iterate over records */ | 
|  | dumper->dump(dumper, reason); | 
|  |  | 
|  | /* reset iterator */ | 
|  | dumper->active = false; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_get_line_nolock - retrieve one kmsg log line (unlocked version) | 
|  | * @dumper: registered kmsg dumper | 
|  | * @syslog: include the "<4>" prefixes | 
|  | * @line: buffer to copy the line to | 
|  | * @size: maximum size of the buffer | 
|  | * @len: length of line placed into buffer | 
|  | * | 
|  | * Start at the beginning of the kmsg buffer, with the oldest kmsg | 
|  | * record, and copy one record into the provided buffer. | 
|  | * | 
|  | * Consecutive calls will return the next available record moving | 
|  | * towards the end of the buffer with the youngest messages. | 
|  | * | 
|  | * A return value of FALSE indicates that there are no more records to | 
|  | * read. | 
|  | * | 
|  | * The function is similar to kmsg_dump_get_line(), but grabs no locks. | 
|  | */ | 
|  | bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog, | 
|  | char *line, size_t size, size_t *len) | 
|  | { | 
|  | struct printk_log *msg; | 
|  | size_t l = 0; | 
|  | bool ret = false; | 
|  |  | 
|  | if (!dumper->active) | 
|  | goto out; | 
|  |  | 
|  | if (dumper->cur_seq < log_first_seq) { | 
|  | /* messages are gone, move to first available one */ | 
|  | dumper->cur_seq = log_first_seq; | 
|  | dumper->cur_idx = log_first_idx; | 
|  | } | 
|  |  | 
|  | /* last entry */ | 
|  | if (dumper->cur_seq >= log_next_seq) | 
|  | goto out; | 
|  |  | 
|  | msg = log_from_idx(dumper->cur_idx); | 
|  | l = msg_print_text(msg, syslog, line, size); | 
|  |  | 
|  | dumper->cur_idx = log_next(dumper->cur_idx); | 
|  | dumper->cur_seq++; | 
|  | ret = true; | 
|  | out: | 
|  | if (len) | 
|  | *len = l; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_get_line - retrieve one kmsg log line | 
|  | * @dumper: registered kmsg dumper | 
|  | * @syslog: include the "<4>" prefixes | 
|  | * @line: buffer to copy the line to | 
|  | * @size: maximum size of the buffer | 
|  | * @len: length of line placed into buffer | 
|  | * | 
|  | * Start at the beginning of the kmsg buffer, with the oldest kmsg | 
|  | * record, and copy one record into the provided buffer. | 
|  | * | 
|  | * Consecutive calls will return the next available record moving | 
|  | * towards the end of the buffer with the youngest messages. | 
|  | * | 
|  | * A return value of FALSE indicates that there are no more records to | 
|  | * read. | 
|  | */ | 
|  | bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, | 
|  | char *line, size_t size, size_t *len) | 
|  | { | 
|  | unsigned long flags; | 
|  | bool ret; | 
|  |  | 
|  | logbuf_lock_irqsave(flags); | 
|  | ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len); | 
|  | logbuf_unlock_irqrestore(flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(kmsg_dump_get_line); | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_get_buffer - copy kmsg log lines | 
|  | * @dumper: registered kmsg dumper | 
|  | * @syslog: include the "<4>" prefixes | 
|  | * @buf: buffer to copy the line to | 
|  | * @size: maximum size of the buffer | 
|  | * @len: length of line placed into buffer | 
|  | * | 
|  | * Start at the end of the kmsg buffer and fill the provided buffer | 
|  | * with as many of the the *youngest* kmsg records that fit into it. | 
|  | * If the buffer is large enough, all available kmsg records will be | 
|  | * copied with a single call. | 
|  | * | 
|  | * Consecutive calls will fill the buffer with the next block of | 
|  | * available older records, not including the earlier retrieved ones. | 
|  | * | 
|  | * A return value of FALSE indicates that there are no more records to | 
|  | * read. | 
|  | */ | 
|  | bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, | 
|  | char *buf, size_t size, size_t *len) | 
|  | { | 
|  | unsigned long flags; | 
|  | u64 seq; | 
|  | u32 idx; | 
|  | u64 next_seq; | 
|  | u32 next_idx; | 
|  | size_t l = 0; | 
|  | bool ret = false; | 
|  |  | 
|  | if (!dumper->active) | 
|  | goto out; | 
|  |  | 
|  | logbuf_lock_irqsave(flags); | 
|  | if (dumper->cur_seq < log_first_seq) { | 
|  | /* messages are gone, move to first available one */ | 
|  | dumper->cur_seq = log_first_seq; | 
|  | dumper->cur_idx = log_first_idx; | 
|  | } | 
|  |  | 
|  | /* last entry */ | 
|  | if (dumper->cur_seq >= dumper->next_seq) { | 
|  | logbuf_unlock_irqrestore(flags); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* calculate length of entire buffer */ | 
|  | seq = dumper->cur_seq; | 
|  | idx = dumper->cur_idx; | 
|  | while (seq < dumper->next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  |  | 
|  | l += msg_print_text(msg, true, NULL, 0); | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  | } | 
|  |  | 
|  | /* move first record forward until length fits into the buffer */ | 
|  | seq = dumper->cur_seq; | 
|  | idx = dumper->cur_idx; | 
|  | while (l > size && seq < dumper->next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  |  | 
|  | l -= msg_print_text(msg, true, NULL, 0); | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  | } | 
|  |  | 
|  | /* last message in next interation */ | 
|  | next_seq = seq; | 
|  | next_idx = idx; | 
|  |  | 
|  | l = 0; | 
|  | while (seq < dumper->next_seq) { | 
|  | struct printk_log *msg = log_from_idx(idx); | 
|  |  | 
|  | l += msg_print_text(msg, syslog, buf + l, size - l); | 
|  | idx = log_next(idx); | 
|  | seq++; | 
|  | } | 
|  |  | 
|  | dumper->next_seq = next_seq; | 
|  | dumper->next_idx = next_idx; | 
|  | ret = true; | 
|  | logbuf_unlock_irqrestore(flags); | 
|  | out: | 
|  | if (len) | 
|  | *len = l; | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer); | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_rewind_nolock - reset the interator (unlocked version) | 
|  | * @dumper: registered kmsg dumper | 
|  | * | 
|  | * Reset the dumper's iterator so that kmsg_dump_get_line() and | 
|  | * kmsg_dump_get_buffer() can be called again and used multiple | 
|  | * times within the same dumper.dump() callback. | 
|  | * | 
|  | * The function is similar to kmsg_dump_rewind(), but grabs no locks. | 
|  | */ | 
|  | void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper) | 
|  | { | 
|  | dumper->cur_seq = clear_seq; | 
|  | dumper->cur_idx = clear_idx; | 
|  | dumper->next_seq = log_next_seq; | 
|  | dumper->next_idx = log_next_idx; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * kmsg_dump_rewind - reset the interator | 
|  | * @dumper: registered kmsg dumper | 
|  | * | 
|  | * Reset the dumper's iterator so that kmsg_dump_get_line() and | 
|  | * kmsg_dump_get_buffer() can be called again and used multiple | 
|  | * times within the same dumper.dump() callback. | 
|  | */ | 
|  | void kmsg_dump_rewind(struct kmsg_dumper *dumper) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | logbuf_lock_irqsave(flags); | 
|  | kmsg_dump_rewind_nolock(dumper); | 
|  | logbuf_unlock_irqrestore(flags); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(kmsg_dump_rewind); | 
|  |  | 
|  | #endif |