| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * camss-csiphy.c |
| * |
| * Qualcomm MSM Camera Subsystem - CSIPHY Module |
| * |
| * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2016-2018 Linaro Ltd. |
| */ |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-subdev.h> |
| |
| #include "camss-csiphy.h" |
| #include "camss.h" |
| |
| #define MSM_CSIPHY_NAME "msm_csiphy" |
| |
| struct csiphy_format { |
| u32 code; |
| u8 bpp; |
| }; |
| |
| static const struct csiphy_format csiphy_formats_8x16[] = { |
| { MEDIA_BUS_FMT_UYVY8_2X8, 8 }, |
| { MEDIA_BUS_FMT_VYUY8_2X8, 8 }, |
| { MEDIA_BUS_FMT_YUYV8_2X8, 8 }, |
| { MEDIA_BUS_FMT_YVYU8_2X8, 8 }, |
| { MEDIA_BUS_FMT_SBGGR8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SGBRG8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SGRBG8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SRGGB8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SBGGR10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SGBRG10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SGRBG10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SRGGB10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SBGGR12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SGBRG12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SGRBG12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SRGGB12_1X12, 12 }, |
| { MEDIA_BUS_FMT_Y10_1X10, 10 }, |
| }; |
| |
| static const struct csiphy_format csiphy_formats_8x96[] = { |
| { MEDIA_BUS_FMT_UYVY8_2X8, 8 }, |
| { MEDIA_BUS_FMT_VYUY8_2X8, 8 }, |
| { MEDIA_BUS_FMT_YUYV8_2X8, 8 }, |
| { MEDIA_BUS_FMT_YVYU8_2X8, 8 }, |
| { MEDIA_BUS_FMT_SBGGR8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SGBRG8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SGRBG8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SRGGB8_1X8, 8 }, |
| { MEDIA_BUS_FMT_SBGGR10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SGBRG10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SGRBG10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SRGGB10_1X10, 10 }, |
| { MEDIA_BUS_FMT_SBGGR12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SGBRG12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SGRBG12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SRGGB12_1X12, 12 }, |
| { MEDIA_BUS_FMT_SBGGR14_1X14, 14 }, |
| { MEDIA_BUS_FMT_SGBRG14_1X14, 14 }, |
| { MEDIA_BUS_FMT_SGRBG14_1X14, 14 }, |
| { MEDIA_BUS_FMT_SRGGB14_1X14, 14 }, |
| { MEDIA_BUS_FMT_Y10_1X10, 10 }, |
| }; |
| |
| /* |
| * csiphy_get_bpp - map media bus format to bits per pixel |
| * @formats: supported media bus formats array |
| * @nformats: size of @formats array |
| * @code: media bus format code |
| * |
| * Return number of bits per pixel |
| */ |
| static u8 csiphy_get_bpp(const struct csiphy_format *formats, |
| unsigned int nformats, u32 code) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < nformats; i++) |
| if (code == formats[i].code) |
| return formats[i].bpp; |
| |
| WARN(1, "Unknown format\n"); |
| |
| return formats[0].bpp; |
| } |
| |
| /* |
| * csiphy_set_clock_rates - Calculate and set clock rates on CSIPHY module |
| * @csiphy: CSIPHY device |
| */ |
| static int csiphy_set_clock_rates(struct csiphy_device *csiphy) |
| { |
| struct device *dev = csiphy->camss->dev; |
| u32 pixel_clock; |
| int i, j; |
| int ret; |
| |
| ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock); |
| if (ret) |
| pixel_clock = 0; |
| |
| for (i = 0; i < csiphy->nclocks; i++) { |
| struct camss_clock *clock = &csiphy->clock[i]; |
| |
| if (!strcmp(clock->name, "csiphy0_timer") || |
| !strcmp(clock->name, "csiphy1_timer") || |
| !strcmp(clock->name, "csiphy2_timer")) { |
| u8 bpp = csiphy_get_bpp(csiphy->formats, |
| csiphy->nformats, |
| csiphy->fmt[MSM_CSIPHY_PAD_SINK].code); |
| u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data; |
| u64 min_rate = pixel_clock * bpp / (2 * num_lanes * 4); |
| long round_rate; |
| |
| camss_add_clock_margin(&min_rate); |
| |
| for (j = 0; j < clock->nfreqs; j++) |
| if (min_rate < clock->freq[j]) |
| break; |
| |
| if (j == clock->nfreqs) { |
| dev_err(dev, |
| "Pixel clock is too high for CSIPHY\n"); |
| return -EINVAL; |
| } |
| |
| /* if sensor pixel clock is not available */ |
| /* set highest possible CSIPHY clock rate */ |
| if (min_rate == 0) |
| j = clock->nfreqs - 1; |
| |
| round_rate = clk_round_rate(clock->clk, clock->freq[j]); |
| if (round_rate < 0) { |
| dev_err(dev, "clk round rate failed: %ld\n", |
| round_rate); |
| return -EINVAL; |
| } |
| |
| csiphy->timer_clk_rate = round_rate; |
| |
| ret = clk_set_rate(clock->clk, csiphy->timer_clk_rate); |
| if (ret < 0) { |
| dev_err(dev, "clk set rate failed: %d\n", ret); |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_set_power - Power on/off CSIPHY module |
| * @sd: CSIPHY V4L2 subdevice |
| * @on: Requested power state |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int csiphy_set_power(struct v4l2_subdev *sd, int on) |
| { |
| struct csiphy_device *csiphy = v4l2_get_subdevdata(sd); |
| struct device *dev = csiphy->camss->dev; |
| |
| if (on) { |
| int ret; |
| |
| ret = pm_runtime_get_sync(dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = csiphy_set_clock_rates(csiphy); |
| if (ret < 0) { |
| pm_runtime_put_sync(dev); |
| return ret; |
| } |
| |
| ret = camss_enable_clocks(csiphy->nclocks, csiphy->clock, dev); |
| if (ret < 0) { |
| pm_runtime_put_sync(dev); |
| return ret; |
| } |
| |
| enable_irq(csiphy->irq); |
| |
| csiphy->ops->reset(csiphy); |
| |
| csiphy->ops->hw_version_read(csiphy, dev); |
| } else { |
| disable_irq(csiphy->irq); |
| |
| camss_disable_clocks(csiphy->nclocks, csiphy->clock); |
| |
| pm_runtime_put_sync(dev); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_get_lane_mask - Calculate CSI2 lane mask configuration parameter |
| * @lane_cfg - CSI2 lane configuration |
| * |
| * Return lane mask |
| */ |
| static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg) |
| { |
| u8 lane_mask; |
| int i; |
| |
| lane_mask = 1 << lane_cfg->clk.pos; |
| |
| for (i = 0; i < lane_cfg->num_data; i++) |
| lane_mask |= 1 << lane_cfg->data[i].pos; |
| |
| return lane_mask; |
| } |
| |
| /* |
| * csiphy_stream_on - Enable streaming on CSIPHY module |
| * @csiphy: CSIPHY device |
| * |
| * Helper function to enable streaming on CSIPHY module. |
| * Main configuration of CSIPHY module is also done here. |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int csiphy_stream_on(struct csiphy_device *csiphy) |
| { |
| struct csiphy_config *cfg = &csiphy->cfg; |
| u32 pixel_clock; |
| u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg); |
| u8 bpp = csiphy_get_bpp(csiphy->formats, csiphy->nformats, |
| csiphy->fmt[MSM_CSIPHY_PAD_SINK].code); |
| u8 val; |
| int ret; |
| |
| ret = camss_get_pixel_clock(&csiphy->subdev.entity, &pixel_clock); |
| if (ret) { |
| dev_err(csiphy->camss->dev, |
| "Cannot get CSI2 transmitter's pixel clock\n"); |
| return -EINVAL; |
| } |
| if (!pixel_clock) { |
| dev_err(csiphy->camss->dev, |
| "Got pixel clock == 0, cannot continue\n"); |
| return -EINVAL; |
| } |
| |
| val = readl_relaxed(csiphy->base_clk_mux); |
| if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) { |
| val &= ~0xf0; |
| val |= cfg->csid_id << 4; |
| } else { |
| val &= ~0xf; |
| val |= cfg->csid_id; |
| } |
| writel_relaxed(val, csiphy->base_clk_mux); |
| wmb(); |
| |
| csiphy->ops->lanes_enable(csiphy, cfg, pixel_clock, bpp, lane_mask); |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_stream_off - Disable streaming on CSIPHY module |
| * @csiphy: CSIPHY device |
| * |
| * Helper function to disable streaming on CSIPHY module |
| */ |
| static void csiphy_stream_off(struct csiphy_device *csiphy) |
| { |
| csiphy->ops->lanes_disable(csiphy, &csiphy->cfg); |
| } |
| |
| |
| /* |
| * csiphy_set_stream - Enable/disable streaming on CSIPHY module |
| * @sd: CSIPHY V4L2 subdevice |
| * @enable: Requested streaming state |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int csiphy_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct csiphy_device *csiphy = v4l2_get_subdevdata(sd); |
| int ret = 0; |
| |
| if (enable) |
| ret = csiphy_stream_on(csiphy); |
| else |
| csiphy_stream_off(csiphy); |
| |
| return ret; |
| } |
| |
| /* |
| * __csiphy_get_format - Get pointer to format structure |
| * @csiphy: CSIPHY device |
| * @cfg: V4L2 subdev pad configuration |
| * @pad: pad from which format is requested |
| * @which: TRY or ACTIVE format |
| * |
| * Return pointer to TRY or ACTIVE format structure |
| */ |
| static struct v4l2_mbus_framefmt * |
| __csiphy_get_format(struct csiphy_device *csiphy, |
| struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, |
| enum v4l2_subdev_format_whence which) |
| { |
| if (which == V4L2_SUBDEV_FORMAT_TRY) |
| return v4l2_subdev_get_try_format(&csiphy->subdev, cfg, pad); |
| |
| return &csiphy->fmt[pad]; |
| } |
| |
| /* |
| * csiphy_try_format - Handle try format by pad subdev method |
| * @csiphy: CSIPHY device |
| * @cfg: V4L2 subdev pad configuration |
| * @pad: pad on which format is requested |
| * @fmt: pointer to v4l2 format structure |
| * @which: wanted subdev format |
| */ |
| static void csiphy_try_format(struct csiphy_device *csiphy, |
| struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, |
| struct v4l2_mbus_framefmt *fmt, |
| enum v4l2_subdev_format_whence which) |
| { |
| unsigned int i; |
| |
| switch (pad) { |
| case MSM_CSIPHY_PAD_SINK: |
| /* Set format on sink pad */ |
| |
| for (i = 0; i < csiphy->nformats; i++) |
| if (fmt->code == csiphy->formats[i].code) |
| break; |
| |
| /* If not found, use UYVY as default */ |
| if (i >= csiphy->nformats) |
| fmt->code = MEDIA_BUS_FMT_UYVY8_2X8; |
| |
| fmt->width = clamp_t(u32, fmt->width, 1, 8191); |
| fmt->height = clamp_t(u32, fmt->height, 1, 8191); |
| |
| fmt->field = V4L2_FIELD_NONE; |
| fmt->colorspace = V4L2_COLORSPACE_SRGB; |
| |
| break; |
| |
| case MSM_CSIPHY_PAD_SRC: |
| /* Set and return a format same as sink pad */ |
| |
| *fmt = *__csiphy_get_format(csiphy, cfg, MSM_CSID_PAD_SINK, |
| which); |
| |
| break; |
| } |
| } |
| |
| /* |
| * csiphy_enum_mbus_code - Handle pixel format enumeration |
| * @sd: CSIPHY V4L2 subdevice |
| * @cfg: V4L2 subdev pad configuration |
| * @code: pointer to v4l2_subdev_mbus_code_enum structure |
| * return -EINVAL or zero on success |
| */ |
| static int csiphy_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| struct csiphy_device *csiphy = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt *format; |
| |
| if (code->pad == MSM_CSIPHY_PAD_SINK) { |
| if (code->index >= csiphy->nformats) |
| return -EINVAL; |
| |
| code->code = csiphy->formats[code->index].code; |
| } else { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SINK, |
| code->which); |
| |
| code->code = format->code; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_enum_frame_size - Handle frame size enumeration |
| * @sd: CSIPHY V4L2 subdevice |
| * @cfg: V4L2 subdev pad configuration |
| * @fse: pointer to v4l2_subdev_frame_size_enum structure |
| * return -EINVAL or zero on success |
| */ |
| static int csiphy_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct csiphy_device *csiphy = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt format; |
| |
| if (fse->index != 0) |
| return -EINVAL; |
| |
| format.code = fse->code; |
| format.width = 1; |
| format.height = 1; |
| csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which); |
| fse->min_width = format.width; |
| fse->min_height = format.height; |
| |
| if (format.code != fse->code) |
| return -EINVAL; |
| |
| format.code = fse->code; |
| format.width = -1; |
| format.height = -1; |
| csiphy_try_format(csiphy, cfg, fse->pad, &format, fse->which); |
| fse->max_width = format.width; |
| fse->max_height = format.height; |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_get_format - Handle get format by pads subdev method |
| * @sd: CSIPHY V4L2 subdevice |
| * @cfg: V4L2 subdev pad configuration |
| * @fmt: pointer to v4l2 subdev format structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int csiphy_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct csiphy_device *csiphy = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt *format; |
| |
| format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which); |
| if (format == NULL) |
| return -EINVAL; |
| |
| fmt->format = *format; |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_set_format - Handle set format by pads subdev method |
| * @sd: CSIPHY V4L2 subdevice |
| * @cfg: V4L2 subdev pad configuration |
| * @fmt: pointer to v4l2 subdev format structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int csiphy_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct csiphy_device *csiphy = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt *format; |
| |
| format = __csiphy_get_format(csiphy, cfg, fmt->pad, fmt->which); |
| if (format == NULL) |
| return -EINVAL; |
| |
| csiphy_try_format(csiphy, cfg, fmt->pad, &fmt->format, fmt->which); |
| *format = fmt->format; |
| |
| /* Propagate the format from sink to source */ |
| if (fmt->pad == MSM_CSIPHY_PAD_SINK) { |
| format = __csiphy_get_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC, |
| fmt->which); |
| |
| *format = fmt->format; |
| csiphy_try_format(csiphy, cfg, MSM_CSIPHY_PAD_SRC, format, |
| fmt->which); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_init_formats - Initialize formats on all pads |
| * @sd: CSIPHY V4L2 subdevice |
| * @fh: V4L2 subdev file handle |
| * |
| * Initialize all pad formats with default values. |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int csiphy_init_formats(struct v4l2_subdev *sd, |
| struct v4l2_subdev_fh *fh) |
| { |
| struct v4l2_subdev_format format = { |
| .pad = MSM_CSIPHY_PAD_SINK, |
| .which = fh ? V4L2_SUBDEV_FORMAT_TRY : |
| V4L2_SUBDEV_FORMAT_ACTIVE, |
| .format = { |
| .code = MEDIA_BUS_FMT_UYVY8_2X8, |
| .width = 1920, |
| .height = 1080 |
| } |
| }; |
| |
| return csiphy_set_format(sd, fh ? fh->pad : NULL, &format); |
| } |
| |
| /* |
| * msm_csiphy_subdev_init - Initialize CSIPHY device structure and resources |
| * @csiphy: CSIPHY device |
| * @res: CSIPHY module resources table |
| * @id: CSIPHY module id |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int msm_csiphy_subdev_init(struct camss *camss, |
| struct csiphy_device *csiphy, |
| const struct resources *res, u8 id) |
| { |
| struct device *dev = camss->dev; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct resource *r; |
| int i, j; |
| int ret; |
| |
| csiphy->camss = camss; |
| csiphy->id = id; |
| csiphy->cfg.combo_mode = 0; |
| |
| if (camss->version == CAMSS_8x16) { |
| csiphy->ops = &csiphy_ops_2ph_1_0; |
| csiphy->formats = csiphy_formats_8x16; |
| csiphy->nformats = ARRAY_SIZE(csiphy_formats_8x16); |
| } else if (camss->version == CAMSS_8x96) { |
| csiphy->ops = &csiphy_ops_3ph_1_0; |
| csiphy->formats = csiphy_formats_8x96; |
| csiphy->nformats = ARRAY_SIZE(csiphy_formats_8x96); |
| } else { |
| return -EINVAL; |
| } |
| |
| /* Memory */ |
| |
| r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]); |
| csiphy->base = devm_ioremap_resource(dev, r); |
| if (IS_ERR(csiphy->base)) { |
| dev_err(dev, "could not map memory\n"); |
| return PTR_ERR(csiphy->base); |
| } |
| |
| r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]); |
| csiphy->base_clk_mux = devm_ioremap_resource(dev, r); |
| if (IS_ERR(csiphy->base_clk_mux)) { |
| dev_err(dev, "could not map memory\n"); |
| return PTR_ERR(csiphy->base_clk_mux); |
| } |
| |
| /* Interrupt */ |
| |
| r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, |
| res->interrupt[0]); |
| if (!r) { |
| dev_err(dev, "missing IRQ\n"); |
| return -EINVAL; |
| } |
| |
| csiphy->irq = r->start; |
| snprintf(csiphy->irq_name, sizeof(csiphy->irq_name), "%s_%s%d", |
| dev_name(dev), MSM_CSIPHY_NAME, csiphy->id); |
| |
| ret = devm_request_irq(dev, csiphy->irq, csiphy->ops->isr, |
| IRQF_TRIGGER_RISING, csiphy->irq_name, csiphy); |
| if (ret < 0) { |
| dev_err(dev, "request_irq failed: %d\n", ret); |
| return ret; |
| } |
| |
| disable_irq(csiphy->irq); |
| |
| /* Clocks */ |
| |
| csiphy->nclocks = 0; |
| while (res->clock[csiphy->nclocks]) |
| csiphy->nclocks++; |
| |
| csiphy->clock = devm_kcalloc(dev, |
| csiphy->nclocks, sizeof(*csiphy->clock), |
| GFP_KERNEL); |
| if (!csiphy->clock) |
| return -ENOMEM; |
| |
| for (i = 0; i < csiphy->nclocks; i++) { |
| struct camss_clock *clock = &csiphy->clock[i]; |
| |
| clock->clk = devm_clk_get(dev, res->clock[i]); |
| if (IS_ERR(clock->clk)) |
| return PTR_ERR(clock->clk); |
| |
| clock->name = res->clock[i]; |
| |
| clock->nfreqs = 0; |
| while (res->clock_rate[i][clock->nfreqs]) |
| clock->nfreqs++; |
| |
| if (!clock->nfreqs) { |
| clock->freq = NULL; |
| continue; |
| } |
| |
| clock->freq = devm_kcalloc(dev, |
| clock->nfreqs, |
| sizeof(*clock->freq), |
| GFP_KERNEL); |
| if (!clock->freq) |
| return -ENOMEM; |
| |
| for (j = 0; j < clock->nfreqs; j++) |
| clock->freq[j] = res->clock_rate[i][j]; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * csiphy_link_setup - Setup CSIPHY connections |
| * @entity: Pointer to media entity structure |
| * @local: Pointer to local pad |
| * @remote: Pointer to remote pad |
| * @flags: Link flags |
| * |
| * Rreturn 0 on success |
| */ |
| static int csiphy_link_setup(struct media_entity *entity, |
| const struct media_pad *local, |
| const struct media_pad *remote, u32 flags) |
| { |
| if ((local->flags & MEDIA_PAD_FL_SOURCE) && |
| (flags & MEDIA_LNK_FL_ENABLED)) { |
| struct v4l2_subdev *sd; |
| struct csiphy_device *csiphy; |
| struct csid_device *csid; |
| |
| if (media_entity_remote_pad(local)) |
| return -EBUSY; |
| |
| sd = media_entity_to_v4l2_subdev(entity); |
| csiphy = v4l2_get_subdevdata(sd); |
| |
| sd = media_entity_to_v4l2_subdev(remote->entity); |
| csid = v4l2_get_subdevdata(sd); |
| |
| csiphy->cfg.csid_id = csid->id; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops csiphy_core_ops = { |
| .s_power = csiphy_set_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops csiphy_video_ops = { |
| .s_stream = csiphy_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops csiphy_pad_ops = { |
| .enum_mbus_code = csiphy_enum_mbus_code, |
| .enum_frame_size = csiphy_enum_frame_size, |
| .get_fmt = csiphy_get_format, |
| .set_fmt = csiphy_set_format, |
| }; |
| |
| static const struct v4l2_subdev_ops csiphy_v4l2_ops = { |
| .core = &csiphy_core_ops, |
| .video = &csiphy_video_ops, |
| .pad = &csiphy_pad_ops, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops csiphy_v4l2_internal_ops = { |
| .open = csiphy_init_formats, |
| }; |
| |
| static const struct media_entity_operations csiphy_media_ops = { |
| .link_setup = csiphy_link_setup, |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| /* |
| * msm_csiphy_register_entity - Register subdev node for CSIPHY module |
| * @csiphy: CSIPHY device |
| * @v4l2_dev: V4L2 device |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int msm_csiphy_register_entity(struct csiphy_device *csiphy, |
| struct v4l2_device *v4l2_dev) |
| { |
| struct v4l2_subdev *sd = &csiphy->subdev; |
| struct media_pad *pads = csiphy->pads; |
| struct device *dev = csiphy->camss->dev; |
| int ret; |
| |
| v4l2_subdev_init(sd, &csiphy_v4l2_ops); |
| sd->internal_ops = &csiphy_v4l2_internal_ops; |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d", |
| MSM_CSIPHY_NAME, csiphy->id); |
| v4l2_set_subdevdata(sd, csiphy); |
| |
| ret = csiphy_init_formats(sd, NULL); |
| if (ret < 0) { |
| dev_err(dev, "Failed to init format: %d\n", ret); |
| return ret; |
| } |
| |
| pads[MSM_CSIPHY_PAD_SINK].flags = MEDIA_PAD_FL_SINK; |
| pads[MSM_CSIPHY_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE; |
| |
| sd->entity.function = MEDIA_ENT_F_IO_V4L; |
| sd->entity.ops = &csiphy_media_ops; |
| ret = media_entity_pads_init(&sd->entity, MSM_CSIPHY_PADS_NUM, pads); |
| if (ret < 0) { |
| dev_err(dev, "Failed to init media entity: %d\n", ret); |
| return ret; |
| } |
| |
| ret = v4l2_device_register_subdev(v4l2_dev, sd); |
| if (ret < 0) { |
| dev_err(dev, "Failed to register subdev: %d\n", ret); |
| media_entity_cleanup(&sd->entity); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * msm_csiphy_unregister_entity - Unregister CSIPHY module subdev node |
| * @csiphy: CSIPHY device |
| */ |
| void msm_csiphy_unregister_entity(struct csiphy_device *csiphy) |
| { |
| v4l2_device_unregister_subdev(&csiphy->subdev); |
| media_entity_cleanup(&csiphy->subdev.entity); |
| } |