| /* |
| * Copyright (C) 2015 Texas Instruments |
| * Author: Jyri Sarha <jsarha@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/component.h> |
| #include <linux/of_graph.h> |
| #include <drm/drm_of.h> |
| |
| #include "tilcdc_drv.h" |
| #include "tilcdc_external.h" |
| |
| static const struct tilcdc_panel_info panel_info_tda998x = { |
| .ac_bias = 255, |
| .ac_bias_intrpt = 0, |
| .dma_burst_sz = 16, |
| .bpp = 16, |
| .fdd = 0x80, |
| .tft_alt_mode = 0, |
| .invert_pxl_clk = 1, |
| .sync_edge = 1, |
| .sync_ctrl = 1, |
| .raster_order = 0, |
| }; |
| |
| static const struct tilcdc_panel_info panel_info_default = { |
| .ac_bias = 255, |
| .ac_bias_intrpt = 0, |
| .dma_burst_sz = 16, |
| .bpp = 16, |
| .fdd = 0x80, |
| .tft_alt_mode = 0, |
| .sync_edge = 0, |
| .sync_ctrl = 1, |
| .raster_order = 0, |
| }; |
| |
| static int tilcdc_external_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct tilcdc_drm_private *priv = connector->dev->dev_private; |
| int ret; |
| |
| ret = tilcdc_crtc_mode_valid(priv->crtc, mode); |
| if (ret != MODE_OK) |
| return ret; |
| |
| BUG_ON(priv->external_connector != connector); |
| BUG_ON(!priv->connector_funcs); |
| |
| /* If the connector has its own mode_valid call it. */ |
| if (!IS_ERR(priv->connector_funcs) && |
| priv->connector_funcs->mode_valid) |
| return priv->connector_funcs->mode_valid(connector, mode); |
| |
| return MODE_OK; |
| } |
| |
| static int tilcdc_add_external_connector(struct drm_device *dev, |
| struct drm_connector *connector) |
| { |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| struct drm_connector_helper_funcs *connector_funcs; |
| |
| /* There should never be more than one connector */ |
| if (WARN_ON(priv->external_connector)) |
| return -EINVAL; |
| |
| priv->external_connector = connector; |
| connector_funcs = devm_kzalloc(dev->dev, sizeof(*connector_funcs), |
| GFP_KERNEL); |
| if (!connector_funcs) |
| return -ENOMEM; |
| |
| /* connector->helper_private contains always struct |
| * connector_helper_funcs pointer. For tilcdc crtc to have a |
| * say if a specific mode is Ok, we need to install our own |
| * helper functions. In our helper functions we copy |
| * everything else but use our own mode_valid() (above). |
| */ |
| if (connector->helper_private) { |
| priv->connector_funcs = connector->helper_private; |
| *connector_funcs = *priv->connector_funcs; |
| } else { |
| priv->connector_funcs = ERR_PTR(-ENOENT); |
| } |
| connector_funcs->mode_valid = tilcdc_external_mode_valid; |
| drm_connector_helper_add(connector, connector_funcs); |
| |
| dev_dbg(dev->dev, "External connector '%s' connected\n", |
| connector->name); |
| |
| return 0; |
| } |
| |
| static |
| struct drm_connector *tilcdc_encoder_find_connector(struct drm_device *ddev, |
| struct drm_encoder *encoder) |
| { |
| struct drm_connector *connector; |
| |
| list_for_each_entry(connector, &ddev->mode_config.connector_list, head) { |
| if (drm_connector_has_possible_encoder(connector, encoder)) |
| return connector; |
| } |
| |
| dev_err(ddev->dev, "No connector found for %s encoder (id %d)\n", |
| encoder->name, encoder->base.id); |
| |
| return NULL; |
| } |
| |
| int tilcdc_add_component_encoder(struct drm_device *ddev) |
| { |
| struct tilcdc_drm_private *priv = ddev->dev_private; |
| struct drm_connector *connector; |
| struct drm_encoder *encoder; |
| |
| list_for_each_entry(encoder, &ddev->mode_config.encoder_list, head) |
| if (encoder->possible_crtcs & (1 << priv->crtc->index)) |
| break; |
| |
| if (!encoder) { |
| dev_err(ddev->dev, "%s: No suitable encoder found\n", __func__); |
| return -ENODEV; |
| } |
| |
| connector = tilcdc_encoder_find_connector(ddev, encoder); |
| |
| if (!connector) |
| return -ENODEV; |
| |
| /* Only tda998x is supported at the moment. */ |
| tilcdc_crtc_set_simulate_vesa_sync(priv->crtc, true); |
| tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_tda998x); |
| |
| return tilcdc_add_external_connector(ddev, connector); |
| } |
| |
| void tilcdc_remove_external_device(struct drm_device *dev) |
| { |
| struct tilcdc_drm_private *priv = dev->dev_private; |
| |
| /* Restore the original helper functions, if any. */ |
| if (IS_ERR(priv->connector_funcs)) |
| drm_connector_helper_add(priv->external_connector, NULL); |
| else if (priv->connector_funcs) |
| drm_connector_helper_add(priv->external_connector, |
| priv->connector_funcs); |
| } |
| |
| static const struct drm_encoder_funcs tilcdc_external_encoder_funcs = { |
| .destroy = drm_encoder_cleanup, |
| }; |
| |
| static |
| int tilcdc_attach_bridge(struct drm_device *ddev, struct drm_bridge *bridge) |
| { |
| struct tilcdc_drm_private *priv = ddev->dev_private; |
| struct drm_connector *connector; |
| int ret; |
| |
| priv->external_encoder->possible_crtcs = BIT(0); |
| |
| ret = drm_bridge_attach(priv->external_encoder, bridge, NULL); |
| if (ret) { |
| dev_err(ddev->dev, "drm_bridge_attach() failed %d\n", ret); |
| return ret; |
| } |
| |
| tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_default); |
| |
| connector = tilcdc_encoder_find_connector(ddev, priv->external_encoder); |
| if (!connector) |
| return -ENODEV; |
| |
| ret = tilcdc_add_external_connector(ddev, connector); |
| |
| return ret; |
| } |
| |
| int tilcdc_attach_external_device(struct drm_device *ddev) |
| { |
| struct tilcdc_drm_private *priv = ddev->dev_private; |
| struct drm_bridge *bridge; |
| struct drm_panel *panel; |
| int ret; |
| |
| ret = drm_of_find_panel_or_bridge(ddev->dev->of_node, 0, 0, |
| &panel, &bridge); |
| if (ret == -ENODEV) |
| return 0; |
| else if (ret) |
| return ret; |
| |
| priv->external_encoder = devm_kzalloc(ddev->dev, |
| sizeof(*priv->external_encoder), |
| GFP_KERNEL); |
| if (!priv->external_encoder) |
| return -ENOMEM; |
| |
| ret = drm_encoder_init(ddev, priv->external_encoder, |
| &tilcdc_external_encoder_funcs, |
| DRM_MODE_ENCODER_NONE, NULL); |
| if (ret) { |
| dev_err(ddev->dev, "drm_encoder_init() failed %d\n", ret); |
| return ret; |
| } |
| |
| if (panel) { |
| bridge = devm_drm_panel_bridge_add(ddev->dev, panel, |
| DRM_MODE_CONNECTOR_DPI); |
| if (IS_ERR(bridge)) { |
| ret = PTR_ERR(bridge); |
| goto err_encoder_cleanup; |
| } |
| } |
| |
| ret = tilcdc_attach_bridge(ddev, bridge); |
| if (ret) |
| goto err_encoder_cleanup; |
| |
| return 0; |
| |
| err_encoder_cleanup: |
| drm_encoder_cleanup(priv->external_encoder); |
| return ret; |
| } |
| |
| static int dev_match_of(struct device *dev, void *data) |
| { |
| return dev->of_node == data; |
| } |
| |
| int tilcdc_get_external_components(struct device *dev, |
| struct component_match **match) |
| { |
| struct device_node *node; |
| |
| node = of_graph_get_remote_node(dev->of_node, 0, 0); |
| |
| if (!of_device_is_compatible(node, "nxp,tda998x")) { |
| of_node_put(node); |
| return 0; |
| } |
| |
| if (match) |
| drm_of_component_match_add(dev, match, dev_match_of, node); |
| of_node_put(node); |
| return 1; |
| } |