blob: 93efed629900c65f9c9b1d74265cb4d2c7936245 [file] [log] [blame]
UniPhier reset controller
System reset
------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-ld4-reset" - for LD4 SoC
"socionext,uniphier-pro4-reset" - for Pro4 SoC
"socionext,uniphier-sld8-reset" - for sLD8 SoC
"socionext,uniphier-pro5-reset" - for Pro5 SoC
"socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-reset" - for LD11 SoC
"socionext,uniphier-ld20-reset" - for LD20 SoC
"socionext,uniphier-pxs3-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
sysctrl@61840000 {
compatible = "socionext,uniphier-ld11-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x4000>;
reset {
compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
other nodes ...
};
Media I/O (MIO) reset, SD reset
-------------------------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-ld4-mio-reset" - for LD4 SoC
"socionext,uniphier-pro4-mio-reset" - for Pro4 SoC
"socionext,uniphier-sld8-mio-reset" - for sLD8 SoC
"socionext,uniphier-pro5-sd-reset" - for Pro5 SoC
"socionext,uniphier-pxs2-sd-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
"socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
"socionext,uniphier-ld20-sd-reset" - for LD20 SoC
"socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
mioctrl@59810000 {
compatible = "socionext,uniphier-ld11-mioctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x800>;
reset {
compatible = "socionext,uniphier-ld11-mio-reset";
#reset-cells = <1>;
};
other nodes ...
};
Peripheral reset
----------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-ld4-peri-reset" - for LD4 SoC
"socionext,uniphier-pro4-peri-reset" - for Pro4 SoC
"socionext,uniphier-sld8-peri-reset" - for sLD8 SoC
"socionext,uniphier-pro5-peri-reset" - for Pro5 SoC
"socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-peri-reset" - for LD11 SoC
"socionext,uniphier-ld20-peri-reset" - for LD20 SoC
"socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
perictrl@59820000 {
compatible = "socionext,uniphier-ld11-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
reset {
compatible = "socionext,uniphier-ld11-peri-reset";
#reset-cells = <1>;
};
other nodes ...
};
Analog signal amplifier reset
-----------------------------
Required properties:
- compatible: should be one of the following:
"socionext,uniphier-ld11-adamv-reset" - for LD11 SoC
"socionext,uniphier-ld20-adamv-reset" - for LD20 SoC
- #reset-cells: should be 1.
Example:
adamv@57920000 {
compatible = "socionext,uniphier-ld11-adamv",
"simple-mfd", "syscon";
reg = <0x57920000 0x1000>;
adamv_rst: reset {
compatible = "socionext,uniphier-ld11-adamv-reset";
#reset-cells = <1>;
};
other nodes ...
};