drivers/staging/cx25821/cx25821-video-upstream.c

/*
 *  Driver for the Conexant CX25821 PCIe bridge
 *
 *  Copyright (C) 2009 Conexant Systems Inc. 
 *  Authors  <hiep.huynh@conexant.com>, <shu.lin@conexant.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */


#include "cx25821-video.h"
#include "cx25821-video-upstream.h"

#include <linux/fs.h> 
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/file.h>
#include <linux/fcntl.h>
#include <asm/uaccess.h>


MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>");
MODULE_LICENSE("GPL");


static int _intr_msk = FLD_VID_SRC_RISC1 | FLD_VID_SRC_UF | FLD_VID_SRC_SYNC | FLD_VID_SRC_OPC_ERR;
    
int cx25821_sram_channel_setup_upstream(struct cx25821_dev *dev,
					struct sram_channel *ch,
					unsigned int bpl, u32 risc)
{
    unsigned int i, lines;
    u32 cdt;
    
    
    if (ch->cmds_start == 0) {
	cx_write(ch->ptr1_reg, 0);
	cx_write(ch->ptr2_reg, 0);
	cx_write(ch->cnt2_reg, 0);
	cx_write(ch->cnt1_reg, 0);
	return 0;
    } 

    bpl   = (bpl + 7) & ~7; /* alignment */
    cdt   = ch->cdt;
    lines = ch->fifo_size / bpl;
    
    if (lines > 4)  
    {
	lines = 4;
    }
    
    BUG_ON(lines < 2);


    /* write CDT */
    for (i = 0; i < lines; i++) {
	cx_write(cdt + 16*i, ch->fifo_start + bpl*i);
	cx_write(cdt + 16*i +  4, 0);
	cx_write(cdt + 16*i +  8, 0);
	cx_write(cdt + 16*i + 12, 0);
    }

    /* write CMDS */    
    cx_write(ch->cmds_start + 0, risc);         
    
    cx_write(ch->cmds_start +  4, 0); 
    cx_write(ch->cmds_start +  8, cdt);             
    cx_write(ch->cmds_start + 12, (lines*16) >> 3);       
    cx_write(ch->cmds_start + 16, ch->ctrl_start);  
					       

    cx_write(ch->cmds_start + 20, VID_IQ_SIZE_DW);     

    for (i = 24; i < 80; i += 4)
	cx_write(ch->cmds_start + i, 0);

    /* fill registers */
    cx_write(ch->ptr1_reg, ch->fifo_start);
    cx_write(ch->ptr2_reg, cdt);
    cx_write(ch->cnt2_reg, (lines*16) >> 3);        
    cx_write(ch->cnt1_reg, (bpl >> 3) - 1);         

    return 0;
}

static __le32 *cx25821_update_riscprogram( struct cx25821_dev *dev,
					     __le32 *rp, unsigned int offset, unsigned int bpl, 
					     u32 sync_line, unsigned int lines, int fifo_enable, int field_type)
{
    unsigned int line, i;
    int dist_betwn_starts = bpl * 2;        
    
    
    *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);   
    
    
    if( USE_RISC_NOOP_VIDEO )
    {
	for( i = 0; i < NUM_NO_OPS; i++ )
	{
	    *(rp++) = cpu_to_le32(RISC_NOOP);
	}
    }
    
    /* scan lines */
    for (line = 0; line < lines; line++) 
    {       
	*(rp++) = cpu_to_le32(RISC_READ|RISC_SOL|RISC_EOL|bpl); 
	*(rp++) = cpu_to_le32(dev->_data_buf_phys_addr+offset);       
	*(rp++) = cpu_to_le32(0); /* bits 63-32 */  
	
	if ( (lines <= NTSC_FIELD_HEIGHT) || (line < (NTSC_FIELD_HEIGHT-1)) || !(dev->_isNTSC) )
	{
	    offset += dist_betwn_starts;    
	}   
    }

    return rp;
}

static __le32 *cx25821_risc_field_upstream( struct cx25821_dev *dev, __le32 *rp, 
					   dma_addr_t databuf_phys_addr,
					   unsigned int offset, u32 sync_line,
					   unsigned int bpl, unsigned int lines, int fifo_enable, int field_type)
{
    unsigned int line, i; 
    struct sram_channel *sram_ch = &dev->sram_channels[dev->_channel_upstream_select];
    int dist_betwn_starts = bpl * 2;        
    
	    
    /* sync instruction */
    if (sync_line != NO_SYNC_LINE)
    {
	*(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);       
    }

    
    if( USE_RISC_NOOP_VIDEO )
    {
	for( i = 0; i < NUM_NO_OPS; i++ )
	{
	    *(rp++) = cpu_to_le32(RISC_NOOP);
	}
    }
    
    /* scan lines */
    for (line = 0; line < lines; line++) 
    {       
	*(rp++) = cpu_to_le32(RISC_READ|RISC_SOL|RISC_EOL|bpl); 
	*(rp++) = cpu_to_le32(databuf_phys_addr+offset);        
	*(rp++) = cpu_to_le32(0); /* bits 63-32 */  
	
	
	if ( (lines <= NTSC_FIELD_HEIGHT) || (line < (NTSC_FIELD_HEIGHT-1)) || !(dev->_isNTSC) )
	{
	    offset += dist_betwn_starts;    //to skip the other field line
	}
	     

	// check if we need to enable the FIFO after the first 4 lines 
	// For the upstream video channel, the risc engine will enable the FIFO. 
	if ( fifo_enable && line == 3 )
	{
	    *(rp++) = RISC_WRITECR;
	    *(rp++) = sram_ch->dma_ctl;
	    *(rp++) = FLD_VID_FIFO_EN;
	    *(rp++) = 0x00000001;
	}        
    }
	
    return rp;
}

int cx25821_risc_buffer_upstream( struct cx25821_dev *dev, 
				  struct pci_dev *pci, 
				  unsigned int top_offset, 
				  unsigned int bpl, unsigned int lines)
{
    __le32 *rp;
    int fifo_enable = 0;
    int singlefield_lines = lines >> 1;             //get line count for single field
    int odd_num_lines     = singlefield_lines;
    int frame = 0;
    int frame_size = 0;
    int databuf_offset = 0;
    int risc_program_size = 0;
    int risc_flag = RISC_CNT_RESET;
    unsigned int bottom_offset = bpl;
    dma_addr_t   risc_phys_jump_addr;
	      
    if( dev->_isNTSC )
    {
	odd_num_lines = singlefield_lines + 1;
	risc_program_size = FRAME1_VID_PROG_SIZE;
	frame_size = (bpl == Y411_LINE_SZ) ? FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422;
    }
    else
    {
	risc_program_size = PAL_VID_PROG_SIZE;  
	frame_size = (bpl == Y411_LINE_SZ) ? FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422;  
    }
       
	
    /* Virtual address of Risc buffer program */
    rp = dev->_dma_virt_addr;
    
    for( frame = 0; frame < NUM_FRAMES; frame++ )
    {        
	databuf_offset = frame_size * frame;     
	
	if (UNSET != top_offset)
	{
	    fifo_enable = (frame == 0) ? FIFO_ENABLE : FIFO_DISABLE;      
	    rp = cx25821_risc_field_upstream(dev, rp, dev->_data_buf_phys_addr+databuf_offset, top_offset, 0, bpl, odd_num_lines, fifo_enable, ODD_FIELD);
	}

	
	fifo_enable = FIFO_DISABLE;     
	
	
	//Even Field
	rp = cx25821_risc_field_upstream(dev, rp, dev->_data_buf_phys_addr+databuf_offset, bottom_offset, 0x200, bpl, singlefield_lines, fifo_enable, EVEN_FIELD);  

	
	if( frame == 0 )
	{
	    risc_flag = RISC_CNT_RESET;   
	    risc_phys_jump_addr = dev->_dma_phys_start_addr + risc_program_size;        
	}
	else
	{
	    risc_phys_jump_addr = dev->_dma_phys_start_addr;
	    risc_flag = RISC_CNT_INC;
	}
		

	// Loop to 2ndFrameRISC or to Start of Risc program & generate IRQ 
	*(rp++)  = cpu_to_le32(RISC_JUMP|RISC_IRQ1|risc_flag);      
	*(rp++)  = cpu_to_le32(risc_phys_jump_addr);            
	*(rp++)  = cpu_to_le32(0);    
    }
    
    return 0;
}


void cx25821_stop_upstream_video_ch1(struct cx25821_dev *dev)
{    
    struct sram_channel *sram_ch = &dev->sram_channels[VID_UPSTREAM_SRAM_CHANNEL_I];
    u32 tmp = 0;
    
    if( !dev->_is_running )
    {
	printk("cx25821: No video file is currently running so return!\n");
	return;
    }
	
    //Disable RISC interrupts    
    tmp = cx_read( sram_ch->int_msk ); 
    cx_write( sram_ch->int_msk, tmp & ~_intr_msk); 
    
    //Turn OFF risc and fifo enable
    tmp = cx_read( sram_ch->dma_ctl );
    cx_write( sram_ch->dma_ctl, tmp & ~(FLD_VID_FIFO_EN | FLD_VID_RISC_EN) );  

    //Clear data buffer memory
    if( dev->_data_buf_virt_addr )
	memset( dev->_data_buf_virt_addr, 0, dev->_data_buf_size ); 
	
    dev->_is_running     = 0;
    dev->_is_first_frame = 0;
    dev->_frame_count    = 0;
    dev->_file_status    = END_OF_FILE;  

    if( dev->_irq_queues )
    {
	kfree(dev->_irq_queues); 
	dev->_irq_queues = NULL; 
    }
    
    if( dev->_filename != NULL )
	kfree(dev->_filename);  

    tmp = cx_read( VID_CH_MODE_SEL );
    cx_write( VID_CH_MODE_SEL, tmp & 0xFFFFFE00);  
}

void cx25821_free_mem_upstream_ch1(struct cx25821_dev *dev)
{        
    if( dev->_is_running )     
    {
	cx25821_stop_upstream_video_ch1(dev);
    }
    
    if (dev->_dma_virt_addr) 
    {
	pci_free_consistent(dev->pci, dev->_risc_size, dev->_dma_virt_addr, dev->_dma_phys_addr);
	dev->_dma_virt_addr = NULL;
    }
    
    if (dev->_data_buf_virt_addr) 
    {
	pci_free_consistent(dev->pci, dev->_data_buf_size, dev->_data_buf_virt_addr, dev->_data_buf_phys_addr);
	dev->_data_buf_virt_addr = NULL;
    }
}


int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch )
{
    struct file * myfile;        
    int frame_index_temp = dev->_frame_index;
    int i = 0;
    int line_size = (dev->_pixel_format == PIXEL_FRMT_411) ? Y411_LINE_SZ : Y422_LINE_SZ;             
    int frame_size = 0;
    int frame_offset = 0;
    ssize_t vfs_read_retval = 0;
    char mybuf[line_size];      
    loff_t file_offset;                     
    loff_t pos;
    mm_segment_t old_fs;
	

    if( dev->_file_status == END_OF_FILE )   
	return 0;
	
    if( dev->_isNTSC )
    {
	frame_size = (line_size == Y411_LINE_SZ) ? FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422;
    }
    else
    { 
	frame_size = (line_size == Y411_LINE_SZ) ? FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422;
    }
    
    frame_offset = (frame_index_temp > 0) ? frame_size : 0; 
    file_offset = dev->_frame_count * frame_size; 
    
	  
    myfile = filp_open( dev->_filename, O_RDONLY | O_LARGEFILE, 0 );
    
    
    if (IS_ERR(myfile)) 
    {
	const int open_errno = -PTR_ERR(myfile);
	printk("%s(): ERROR opening file(%s) with errno = %d! \n", __func__, dev->_filename, open_errno);
	return PTR_ERR(myfile);
    } 
    else 
    {   
	if( !(myfile->f_op) )
	{            
	    printk("%s: File has no file operations registered!", __func__);
	    filp_close(myfile, NULL);
	    return -EIO;
	}
	
	
	if( !myfile->f_op->read )
	{            
	    printk("%s: File has no READ operations registered!", __func__);
	    filp_close(myfile, NULL);
	    return -EIO;
	}
	
	pos = myfile->f_pos;            
	old_fs = get_fs();      
	set_fs(KERNEL_DS);
		
	   
	for( i = 0; i < dev->_lines_count; i++ )
	{
	    pos = file_offset;      
	    
	    vfs_read_retval = vfs_read(myfile, mybuf, line_size, &pos);     
	      
	    if( vfs_read_retval > 0 && vfs_read_retval == line_size && dev->_data_buf_virt_addr != NULL )   
	    {
		memcpy( (void*)(dev->_data_buf_virt_addr+frame_offset/4), mybuf, vfs_read_retval);   
	    }            
	    
	    file_offset += vfs_read_retval;
	    frame_offset += vfs_read_retval;

	    if( vfs_read_retval < line_size )
	    {      
		printk(KERN_INFO "Done: exit %s() since no more bytes to read from Video file.\n", __func__ );
		break;
	    }      
	}
	
	if( i > 0 )         
	    dev->_frame_count++;       
    
	dev->_file_status = (vfs_read_retval == line_size) ? IN_PROGRESS : END_OF_FILE;      

	
	set_fs(old_fs);                 
	filp_close(myfile, NULL);          
    }
    
    return 0;
}

static void cx25821_vidups_handler(struct work_struct *work)
{
    struct cx25821_dev *dev = container_of(work, struct cx25821_dev, _irq_work_entry); 
       
    if( !dev )
    {
	printk("ERROR %s(): since container_of(work_struct) FAILED! \n", __func__ );
	return;
    }
    
    cx25821_get_frame( dev, &dev->sram_channels[dev->_channel_upstream_select] );
}


int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
{
    struct file * myfile;  
    int i = 0, j = 0;
    int line_size = (dev->_pixel_format == PIXEL_FRMT_411) ? Y411_LINE_SZ : Y422_LINE_SZ;     
    ssize_t vfs_read_retval = 0;
    char mybuf[line_size];
    loff_t pos;
    loff_t offset = (unsigned long)0;
    mm_segment_t old_fs;
	

    myfile = filp_open( dev->_filename, O_RDONLY | O_LARGEFILE, 0 );
    
    
    if (IS_ERR(myfile)) 
    {
	const int open_errno = -PTR_ERR(myfile);
	printk("%s(): ERROR opening file(%s) with errno = %d! \n", __func__, dev->_filename, open_errno);
	return PTR_ERR(myfile);
    } 
    else 
    {   
	if( !(myfile->f_op) )
	{            
	    printk("%s: File has no file operations registered!", __func__);
	    filp_close(myfile, NULL);
	    return -EIO;
	}
	
	
	if( !myfile->f_op->read )
	{            
	    printk("%s: File has no READ operations registered!  Returning.", __func__);
	    filp_close(myfile, NULL);
	    return -EIO;
	}
	
	pos = myfile->f_pos;
	old_fs = get_fs();  
	set_fs(KERNEL_DS);
		
	
	for( j = 0; j < NUM_FRAMES; j++ )       
	{          
	    for( i = 0; i < dev->_lines_count; i++ )
	    {
		pos = offset;

		vfs_read_retval = vfs_read(myfile, mybuf, line_size, &pos);                
		
		if( vfs_read_retval > 0 && vfs_read_retval == line_size && dev->_data_buf_virt_addr != NULL ) 
		{                                        
		    memcpy( (void*)(dev->_data_buf_virt_addr+offset/4), mybuf, vfs_read_retval);   
		}
		
		
		offset += vfs_read_retval;

		if( vfs_read_retval < line_size )
		{      
		    printk(KERN_INFO "Done: exit %s() since no more bytes to read from Video file.\n", __func__ );
		    break;
		}      
	    }
	    
	    if( i > 0 )     
		dev->_frame_count++;
	    
	    if( vfs_read_retval < line_size )
	    {
		break;
	    }
	}
		 

	dev->_file_status = (vfs_read_retval == line_size) ? IN_PROGRESS : END_OF_FILE;  
	
	set_fs(old_fs);        
	myfile->f_pos = 0;
	filp_close(myfile, NULL);        
    }
    
    return 0;
}


int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
					   struct sram_channel *sram_ch,
					   int bpl)
{
    int ret = 0;
    dma_addr_t dma_addr;
    dma_addr_t data_dma_addr;        
       
    if( dev->_dma_virt_addr != NULL )
    {    
	pci_free_consistent(dev->pci, dev->upstream_riscbuf_size, dev->_dma_virt_addr, dev->_dma_phys_addr);
    }
    
    
    dev->_dma_virt_addr = pci_alloc_consistent(dev->pci, dev->upstream_riscbuf_size, &dma_addr);
    dev->_dma_virt_start_addr = dev->_dma_virt_addr;      
    dev->_dma_phys_start_addr = dma_addr;        
    dev->_dma_phys_addr = dma_addr;
    dev->_risc_size     = dev->upstream_riscbuf_size;
       
  
    if (!dev->_dma_virt_addr)
    {
	printk("cx25821: FAILED to allocate memory for Risc buffer! Returning.\n");
	return -ENOMEM;
    }

 
    //Clear memory at address 
    memset( dev->_dma_virt_addr, 0, dev->_risc_size );

    
    if( dev->_data_buf_virt_addr != NULL )
    {    
	pci_free_consistent(dev->pci, dev->upstream_databuf_size, dev->_data_buf_virt_addr, dev->_data_buf_phys_addr);
    }
    
    //For Video Data buffer allocation  
    dev->_data_buf_virt_addr = pci_alloc_consistent(dev->pci, dev->upstream_databuf_size, &data_dma_addr);
    dev->_data_buf_phys_addr = data_dma_addr;
    dev->_data_buf_size      = dev->upstream_databuf_size;
       
    if (!dev->_data_buf_virt_addr)
    {
	printk("cx25821: FAILED to allocate memory for data buffer! Returning.\n");
	return -ENOMEM;
    }
  
    
    //Clear memory at address 
    memset( dev->_data_buf_virt_addr, 0, dev->_data_buf_size );
   
    
    ret = cx25821_openfile(dev, sram_ch);     
    if( ret < 0 )
	return ret;
					   
    
    //Create RISC programs
    ret = cx25821_risc_buffer_upstream(dev, dev->pci, 0,  bpl, dev->_lines_count );                                
    if (ret < 0)
    {
	printk(KERN_INFO "cx25821: Failed creating Video Upstream Risc programs! \n");
	goto error;
    }
       
    return 0;

error:
    return ret;
}

int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num, u32 status)
{
    u32 int_msk_tmp;
    struct sram_channel *channel = &dev->sram_channels[chan_num];
    int singlefield_lines = NTSC_FIELD_HEIGHT; 
    int line_size_in_bytes = Y422_LINE_SZ;  
    int odd_risc_prog_size = 0;    
    dma_addr_t   risc_phys_jump_addr;
    __le32 * rp;

    
    
    if (status & FLD_VID_SRC_RISC1)      
    {
	// We should only process one program per call
	u32 prog_cnt = cx_read( channel->gpcnt );
    
	//Since we've identified our IRQ, clear our bits from the interrupt mask and interrupt status registers
	int_msk_tmp = cx_read(channel->int_msk); 
	cx_write(channel->int_msk, int_msk_tmp & ~_intr_msk); 
	cx_write( channel->int_stat, _intr_msk ); 
	
	spin_lock(&dev->slock);     
	    
	dev->_frame_index = prog_cnt;

	queue_work(dev->_irq_queues, &dev->_irq_work_entry);      
	       
	
	if ( dev->_is_first_frame )
	{
	    dev->_is_first_frame = 0;          
    
	    if( dev->_isNTSC )
	    {
		singlefield_lines += 1;
		odd_risc_prog_size = ODD_FLD_NTSC_PROG_SIZE;
	    }
	    else
	    {
		singlefield_lines = PAL_FIELD_HEIGHT; 
		odd_risc_prog_size = ODD_FLD_PAL_PROG_SIZE;  
	    }


	    if( dev->_dma_virt_start_addr != NULL )
	    {
		line_size_in_bytes = (dev->_pixel_format == PIXEL_FRMT_411) ? Y411_LINE_SZ : Y422_LINE_SZ;
		risc_phys_jump_addr = dev->_dma_phys_start_addr + odd_risc_prog_size;        
		
		rp = cx25821_update_riscprogram(dev, dev->_dma_virt_start_addr, TOP_OFFSET, line_size_in_bytes, 0x0, singlefield_lines, FIFO_DISABLE, ODD_FIELD);  
		
		// Jump to Even Risc program of 1st Frame 
		*(rp++)  = cpu_to_le32(RISC_JUMP);      
		*(rp++)  = cpu_to_le32(risc_phys_jump_addr);            
		*(rp++)  = cpu_to_le32(0); 
	    }
	}
	
	spin_unlock(&dev->slock);       
    }
    else        
    {
	if(status & FLD_VID_SRC_UF)
	    printk("%s: Video Received Underflow Error Interrupt!\n", __func__);

	if(status & FLD_VID_SRC_SYNC)
	    printk("%s: Video Received Sync Error Interrupt!\n", __func__);

	if(status & FLD_VID_SRC_OPC_ERR)
	    printk("%s: Video Received OpCode Error Interrupt!\n", __func__);
    }
	
	
    if( dev->_file_status == END_OF_FILE )
    {                       
	printk("cx25821: EOF Channel 1 Framecount = %d\n", dev->_frame_count );
	return -1;
    }
    
    //ElSE, set the interrupt mask register, re-enable irq. 
    int_msk_tmp = cx_read( channel->int_msk );
    cx_write( channel->int_msk, int_msk_tmp |= _intr_msk ); 
    
    return 0;
}

static irqreturn_t cx25821_upstream_irq(int irq, void *dev_id)
{
    struct cx25821_dev *dev = dev_id;
    u32 msk_stat, vid_status;
    int handled = 0;    
    int channel_num = 0;
    struct sram_channel *sram_ch;
    
    
    if( !dev )
	return -1;
	
    channel_num = VID_UPSTREAM_SRAM_CHANNEL_I;
    
    sram_ch = &dev->sram_channels[channel_num];     

    msk_stat   = cx_read(sram_ch->int_mstat);     
    vid_status = cx_read(sram_ch->int_stat);
    
    // Only deal with our interrupt
    if(vid_status)
    {
	handled = cx25821_video_upstream_irq(dev, channel_num, vid_status);     
    }        
    
    if( handled < 0 )
    {   
	cx25821_stop_upstream_video_ch1(dev);
    }
    else
    {
	handled += handled;    
    }

    return IRQ_RETVAL(handled);
}


void cx25821_set_pixelengine(struct cx25821_dev *dev, struct sram_channel *ch, int pix_format)
{
    int width = WIDTH_D1;               
    int height = dev->_lines_count; 
    int num_lines, odd_num_lines;
    u32 value;
    int vip_mode = OUTPUT_FRMT_656;        
	
  
    value = ( (pix_format & 0x3) << 12 ) | ( vip_mode & 0x7 );
    value &= 0xFFFFFFEF;
    value |= dev->_isNTSC ? 0 : 0x10;
    cx_write( ch->vid_fmt_ctl, value );

    
    // set number of active pixels in each line. Default is 720 pixels in both NTSC and PAL format
    cx_write( ch->vid_active_ctl1, width );
    
    num_lines = (height / 2) & 0x3FF;
    odd_num_lines = num_lines;

    if(dev->_isNTSC)
    {
	odd_num_lines += 1; 
    }

    value = (num_lines << 16) | odd_num_lines;
    
    // set number of active lines in field 0 (top) and field 1 (bottom)
    cx_write( ch->vid_active_ctl2, value );    

    cx_write( ch->vid_cdt_size, VID_CDT_SIZE >> 3 );
}


int cx25821_start_video_dma_upstream(struct cx25821_dev *dev,
				     struct sram_channel *sram_ch)
{
    u32 tmp = 0;
    int err = 0;
 
    
    // 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for channel A-C
    tmp = cx_read( VID_CH_MODE_SEL );
    cx_write( VID_CH_MODE_SEL, tmp | 0x1B0001FF);  
       
    
    // Set the physical start address of the RISC program in the initial program counter(IPC) member of the cmds.
    cx_write(sram_ch->cmds_start + 0, dev->_dma_phys_addr);
    cx_write(sram_ch->cmds_start +  4, 0); /* Risc IPC High 64 bits 63-32 */
    
    /* reset counter */
    cx_write(sram_ch->gpcnt_ctl, 3); 

    // Clear our bits from the interrupt status register.  
    cx_write( sram_ch->int_stat, _intr_msk );

    
    //Set the interrupt mask register, enable irq.  
    cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
    tmp = cx_read( sram_ch->int_msk );
    cx_write( sram_ch->int_msk, tmp |= _intr_msk );    
    
    
    err = request_irq(dev->pci->irq, cx25821_upstream_irq, IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
    if (err < 0) 
    {
	printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name, dev->pci->irq);
	goto fail_irq;
    } 
    
    
    // Start the DMA  engine
    tmp = cx_read( sram_ch->dma_ctl );
    cx_set( sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN );  

    dev->_is_running = 1; 
    dev->_is_first_frame = 1;                 
    
    return 0;    

fail_irq:
    cx25821_dev_unregister(dev);  
    return err;
}


int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select, int pixel_format)
{
    struct sram_channel *sram_ch; 
    u32 tmp;      
    int retval = 0;
    int err = 0;    
    int data_frame_size = 0;
    int risc_buffer_size = 0;
    int str_length = 0;


    if( dev->_is_running ) 
    {
	printk("Video Channel is still running so return!\n");
	return 0;
    }
    

    dev->_channel_upstream_select = channel_select;      
    sram_ch = &dev->sram_channels[channel_select];   
    
    
    INIT_WORK(&dev->_irq_work_entry, cx25821_vidups_handler);
    dev->_irq_queues = create_singlethread_workqueue("cx25821_workqueue");   

    if(!dev->_irq_queues)
    {
	printk("cx25821: create_singlethread_workqueue() for Video FAILED!\n");
	return -ENOMEM;
    }
    
    // 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for channel A-C
    tmp = cx_read( VID_CH_MODE_SEL );
    cx_write( VID_CH_MODE_SEL, tmp | 0x1B0001FF);       
    
	  
    dev->_is_running   = 0;    
    dev->_frame_count  = 0;
    dev->_file_status  = RESET_STATUS;  
    dev->_lines_count  = dev->_isNTSC ? 480 : 576; 
    dev->_pixel_format = pixel_format;       
    dev->_line_size    = (dev->_pixel_format == PIXEL_FRMT_422) ? (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2;   
    data_frame_size = dev->_isNTSC ? NTSC_DATA_BUF_SZ : PAL_DATA_BUF_SZ;        
    risc_buffer_size = dev->_isNTSC ? NTSC_RISC_BUF_SIZE : PAL_RISC_BUF_SIZE;
    
	    
    if( dev->input_filename )
    {
	str_length = strlen(dev->input_filename);
	dev->_filename = (char *) kmalloc(str_length + 1, GFP_KERNEL);
	
	if( !dev->_filename )
	    goto error;
	    
	memcpy(dev->_filename, dev->input_filename, str_length + 1);    
    }
    else
    {
	str_length = strlen(dev->_defaultname);       
	dev->_filename = (char *) kmalloc(str_length + 1, GFP_KERNEL);
	
	if( !dev->_filename )
	    goto error;
	    
	memcpy(dev->_filename, dev->_defaultname, str_length + 1);
    }
       
    
    //Default if filename is empty string 
    if( strcmp(dev->input_filename,"") == 0)        
    {
	if( dev->_isNTSC )
	{
	    dev->_filename = (dev->_pixel_format == PIXEL_FRMT_411) ? "/root/vid411.yuv" : "/root/vidtest.yuv";
	}
	else
	{
	    dev->_filename = (dev->_pixel_format == PIXEL_FRMT_411) ? "/root/pal411.yuv" : "/root/pal422.yuv";    
	}
    }
    
    dev->_is_running   = 0;    
    dev->_frame_count  = 0;
    dev->_file_status  = RESET_STATUS;  
    dev->_lines_count  = dev->_isNTSC ? 480 : 576; 
    dev->_pixel_format = pixel_format;       
    dev->_line_size    = (dev->_pixel_format == PIXEL_FRMT_422) ? (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2;     
   
    retval = cx25821_sram_channel_setup_upstream(dev, sram_ch, dev->_line_size, 0);         
    
    /* setup fifo + format */
    cx25821_set_pixelengine(dev, sram_ch, dev->_pixel_format);       

    dev->upstream_riscbuf_size = risc_buffer_size * 2;      
    dev->upstream_databuf_size = data_frame_size * 2;       
 
     
    //Allocating buffers and prepare RISC program
    retval = cx25821_upstream_buffer_prepare(dev, sram_ch, dev->_line_size);
    if (retval < 0) 
    {
	printk(KERN_ERR "%s: Failed to set up Video upstream buffers!\n", dev->name);
	goto error;
    }
    
      
    cx25821_start_video_dma_upstream(dev, sram_ch);                                     

    return 0;
    
error:
    cx25821_dev_unregister(dev);
    
    return err;
}