| /* |
| * BCM2835 DMA engine support |
| * |
| * This driver only supports cyclic DMA transfers |
| * as needed for the I2S module. |
| * |
| * Author: Florian Meier <florian.meier@koalo.de> |
| * Copyright 2013 |
| * |
| * Based on |
| * OMAP DMAengine support by Russell King |
| * |
| * BCM2708 DMA Driver |
| * Copyright (C) 2010 Broadcom |
| * |
| * Raspberry Pi PCM I2S ALSA Driver |
| * Copyright (c) by Phil Poole 2013 |
| * |
| * MARVELL MMP Peripheral DMA Driver |
| * Copyright 2012 Marvell International Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <linux/of.h> |
| #include <linux/of_dma.h> |
| |
| #include "virt-dma.h" |
| |
| #define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14 |
| #define BCM2835_DMA_CHAN_NAME_SIZE 8 |
| |
| struct bcm2835_dmadev { |
| struct dma_device ddev; |
| spinlock_t lock; |
| void __iomem *base; |
| struct device_dma_parameters dma_parms; |
| }; |
| |
| struct bcm2835_dma_cb { |
| uint32_t info; |
| uint32_t src; |
| uint32_t dst; |
| uint32_t length; |
| uint32_t stride; |
| uint32_t next; |
| uint32_t pad[2]; |
| }; |
| |
| struct bcm2835_cb_entry { |
| struct bcm2835_dma_cb *cb; |
| dma_addr_t paddr; |
| }; |
| |
| struct bcm2835_chan { |
| struct virt_dma_chan vc; |
| struct list_head node; |
| |
| struct dma_slave_config cfg; |
| unsigned int dreq; |
| |
| int ch; |
| struct bcm2835_desc *desc; |
| struct dma_pool *cb_pool; |
| |
| void __iomem *chan_base; |
| int irq_number; |
| unsigned int irq_flags; |
| |
| bool is_lite_channel; |
| }; |
| |
| struct bcm2835_desc { |
| struct bcm2835_chan *c; |
| struct virt_dma_desc vd; |
| enum dma_transfer_direction dir; |
| |
| unsigned int frames; |
| size_t size; |
| |
| bool cyclic; |
| |
| struct bcm2835_cb_entry cb_list[]; |
| }; |
| |
| #define BCM2835_DMA_CS 0x00 |
| #define BCM2835_DMA_ADDR 0x04 |
| #define BCM2835_DMA_TI 0x08 |
| #define BCM2835_DMA_SOURCE_AD 0x0c |
| #define BCM2835_DMA_DEST_AD 0x10 |
| #define BCM2835_DMA_LEN 0x14 |
| #define BCM2835_DMA_STRIDE 0x18 |
| #define BCM2835_DMA_NEXTCB 0x1c |
| #define BCM2835_DMA_DEBUG 0x20 |
| |
| /* DMA CS Control and Status bits */ |
| #define BCM2835_DMA_ACTIVE BIT(0) /* activate the DMA */ |
| #define BCM2835_DMA_END BIT(1) /* current CB has ended */ |
| #define BCM2835_DMA_INT BIT(2) /* interrupt status */ |
| #define BCM2835_DMA_DREQ BIT(3) /* DREQ state */ |
| #define BCM2835_DMA_ISPAUSED BIT(4) /* Pause requested or not active */ |
| #define BCM2835_DMA_ISHELD BIT(5) /* Is held by DREQ flow control */ |
| #define BCM2835_DMA_WAITING_FOR_WRITES BIT(6) /* waiting for last |
| * AXI-write to ack |
| */ |
| #define BCM2835_DMA_ERR BIT(8) |
| #define BCM2835_DMA_PRIORITY(x) ((x & 15) << 16) /* AXI priority */ |
| #define BCM2835_DMA_PANIC_PRIORITY(x) ((x & 15) << 20) /* panic priority */ |
| /* current value of TI.BCM2835_DMA_WAIT_RESP */ |
| #define BCM2835_DMA_WAIT_FOR_WRITES BIT(28) |
| #define BCM2835_DMA_DIS_DEBUG BIT(29) /* disable debug pause signal */ |
| #define BCM2835_DMA_ABORT BIT(30) /* Stop current CB, go to next, WO */ |
| #define BCM2835_DMA_RESET BIT(31) /* WO, self clearing */ |
| |
| /* Transfer information bits - also bcm2835_cb.info field */ |
| #define BCM2835_DMA_INT_EN BIT(0) |
| #define BCM2835_DMA_TDMODE BIT(1) /* 2D-Mode */ |
| #define BCM2835_DMA_WAIT_RESP BIT(3) /* wait for AXI-write to be acked */ |
| #define BCM2835_DMA_D_INC BIT(4) |
| #define BCM2835_DMA_D_WIDTH BIT(5) /* 128bit writes if set */ |
| #define BCM2835_DMA_D_DREQ BIT(6) /* enable DREQ for destination */ |
| #define BCM2835_DMA_D_IGNORE BIT(7) /* ignore destination writes */ |
| #define BCM2835_DMA_S_INC BIT(8) |
| #define BCM2835_DMA_S_WIDTH BIT(9) /* 128bit writes if set */ |
| #define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */ |
| #define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */ |
| #define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12) |
| #define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */ |
| #define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */ |
| #define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */ |
| |
| /* debug register bits */ |
| #define BCM2835_DMA_DEBUG_LAST_NOT_SET_ERR BIT(0) |
| #define BCM2835_DMA_DEBUG_FIFO_ERR BIT(1) |
| #define BCM2835_DMA_DEBUG_READ_ERR BIT(2) |
| #define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_SHIFT 4 |
| #define BCM2835_DMA_DEBUG_OUTSTANDING_WRITES_BITS 4 |
| #define BCM2835_DMA_DEBUG_ID_SHIFT 16 |
| #define BCM2835_DMA_DEBUG_ID_BITS 9 |
| #define BCM2835_DMA_DEBUG_STATE_SHIFT 16 |
| #define BCM2835_DMA_DEBUG_STATE_BITS 9 |
| #define BCM2835_DMA_DEBUG_VERSION_SHIFT 25 |
| #define BCM2835_DMA_DEBUG_VERSION_BITS 3 |
| #define BCM2835_DMA_DEBUG_LITE BIT(28) |
| |
| /* shared registers for all dma channels */ |
| #define BCM2835_DMA_INT_STATUS 0xfe0 |
| #define BCM2835_DMA_ENABLE 0xff0 |
| |
| #define BCM2835_DMA_DATA_TYPE_S8 1 |
| #define BCM2835_DMA_DATA_TYPE_S16 2 |
| #define BCM2835_DMA_DATA_TYPE_S32 4 |
| #define BCM2835_DMA_DATA_TYPE_S128 16 |
| |
| /* Valid only for channels 0 - 14, 15 has its own base address */ |
| #define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */ |
| #define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n)) |
| |
| /* the max dma length for different channels */ |
| #define MAX_DMA_LEN SZ_1G |
| #define MAX_LITE_DMA_LEN (SZ_64K - 4) |
| |
| static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c) |
| { |
| /* lite and normal channels have different max frame length */ |
| return c->is_lite_channel ? MAX_LITE_DMA_LEN : MAX_DMA_LEN; |
| } |
| |
| /* how many frames of max_len size do we need to transfer len bytes */ |
| static inline size_t bcm2835_dma_frames_for_length(size_t len, |
| size_t max_len) |
| { |
| return DIV_ROUND_UP(len, max_len); |
| } |
| |
| static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d) |
| { |
| return container_of(d, struct bcm2835_dmadev, ddev); |
| } |
| |
| static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c) |
| { |
| return container_of(c, struct bcm2835_chan, vc.chan); |
| } |
| |
| static inline struct bcm2835_desc *to_bcm2835_dma_desc( |
| struct dma_async_tx_descriptor *t) |
| { |
| return container_of(t, struct bcm2835_desc, vd.tx); |
| } |
| |
| static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc) |
| { |
| size_t i; |
| |
| for (i = 0; i < desc->frames; i++) |
| dma_pool_free(desc->c->cb_pool, desc->cb_list[i].cb, |
| desc->cb_list[i].paddr); |
| |
| kfree(desc); |
| } |
| |
| static void bcm2835_dma_desc_free(struct virt_dma_desc *vd) |
| { |
| bcm2835_dma_free_cb_chain( |
| container_of(vd, struct bcm2835_desc, vd)); |
| } |
| |
| static void bcm2835_dma_create_cb_set_length( |
| struct bcm2835_chan *chan, |
| struct bcm2835_dma_cb *control_block, |
| size_t len, |
| size_t period_len, |
| size_t *total_len, |
| u32 finalextrainfo) |
| { |
| size_t max_len = bcm2835_dma_max_frame_length(chan); |
| |
| /* set the length taking lite-channel limitations into account */ |
| control_block->length = min_t(u32, len, max_len); |
| |
| /* finished if we have no period_length */ |
| if (!period_len) |
| return; |
| |
| /* |
| * period_len means: that we need to generate |
| * transfers that are terminating at every |
| * multiple of period_len - this is typically |
| * used to set the interrupt flag in info |
| * which is required during cyclic transfers |
| */ |
| |
| /* have we filled in period_length yet? */ |
| if (*total_len + control_block->length < period_len) { |
| /* update number of bytes in this period so far */ |
| *total_len += control_block->length; |
| return; |
| } |
| |
| /* calculate the length that remains to reach period_length */ |
| control_block->length = period_len - *total_len; |
| |
| /* reset total_length for next period */ |
| *total_len = 0; |
| |
| /* add extrainfo bits in info */ |
| control_block->info |= finalextrainfo; |
| } |
| |
| static inline size_t bcm2835_dma_count_frames_for_sg( |
| struct bcm2835_chan *c, |
| struct scatterlist *sgl, |
| unsigned int sg_len) |
| { |
| size_t frames = 0; |
| struct scatterlist *sgent; |
| unsigned int i; |
| size_t plength = bcm2835_dma_max_frame_length(c); |
| |
| for_each_sg(sgl, sgent, sg_len, i) |
| frames += bcm2835_dma_frames_for_length( |
| sg_dma_len(sgent), plength); |
| |
| return frames; |
| } |
| |
| /** |
| * bcm2835_dma_create_cb_chain - create a control block and fills data in |
| * |
| * @chan: the @dma_chan for which we run this |
| * @direction: the direction in which we transfer |
| * @cyclic: it is a cyclic transfer |
| * @info: the default info bits to apply per controlblock |
| * @frames: number of controlblocks to allocate |
| * @src: the src address to assign (if the S_INC bit is set |
| * in @info, then it gets incremented) |
| * @dst: the dst address to assign (if the D_INC bit is set |
| * in @info, then it gets incremented) |
| * @buf_len: the full buffer length (may also be 0) |
| * @period_len: the period length when to apply @finalextrainfo |
| * in addition to the last transfer |
| * this will also break some control-blocks early |
| * @finalextrainfo: additional bits in last controlblock |
| * (or when period_len is reached in case of cyclic) |
| * @gfp: the GFP flag to use for allocation |
| */ |
| static struct bcm2835_desc *bcm2835_dma_create_cb_chain( |
| struct dma_chan *chan, enum dma_transfer_direction direction, |
| bool cyclic, u32 info, u32 finalextrainfo, size_t frames, |
| dma_addr_t src, dma_addr_t dst, size_t buf_len, |
| size_t period_len, gfp_t gfp) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| size_t len = buf_len, total_len; |
| size_t frame; |
| struct bcm2835_desc *d; |
| struct bcm2835_cb_entry *cb_entry; |
| struct bcm2835_dma_cb *control_block; |
| |
| if (!frames) |
| return NULL; |
| |
| /* allocate and setup the descriptor. */ |
| d = kzalloc(sizeof(*d) + frames * sizeof(struct bcm2835_cb_entry), |
| gfp); |
| if (!d) |
| return NULL; |
| |
| d->c = c; |
| d->dir = direction; |
| d->cyclic = cyclic; |
| |
| /* |
| * Iterate over all frames, create a control block |
| * for each frame and link them together. |
| */ |
| for (frame = 0, total_len = 0; frame < frames; d->frames++, frame++) { |
| cb_entry = &d->cb_list[frame]; |
| cb_entry->cb = dma_pool_alloc(c->cb_pool, gfp, |
| &cb_entry->paddr); |
| if (!cb_entry->cb) |
| goto error_cb; |
| |
| /* fill in the control block */ |
| control_block = cb_entry->cb; |
| control_block->info = info; |
| control_block->src = src; |
| control_block->dst = dst; |
| control_block->stride = 0; |
| control_block->next = 0; |
| /* set up length in control_block if requested */ |
| if (buf_len) { |
| /* calculate length honoring period_length */ |
| bcm2835_dma_create_cb_set_length( |
| c, control_block, |
| len, period_len, &total_len, |
| cyclic ? finalextrainfo : 0); |
| |
| /* calculate new remaining length */ |
| len -= control_block->length; |
| } |
| |
| /* link this the last controlblock */ |
| if (frame) |
| d->cb_list[frame - 1].cb->next = cb_entry->paddr; |
| |
| /* update src and dst and length */ |
| if (src && (info & BCM2835_DMA_S_INC)) |
| src += control_block->length; |
| if (dst && (info & BCM2835_DMA_D_INC)) |
| dst += control_block->length; |
| |
| /* Length of total transfer */ |
| d->size += control_block->length; |
| } |
| |
| /* the last frame requires extra flags */ |
| d->cb_list[d->frames - 1].cb->info |= finalextrainfo; |
| |
| /* detect a size missmatch */ |
| if (buf_len && (d->size != buf_len)) |
| goto error_cb; |
| |
| return d; |
| error_cb: |
| bcm2835_dma_free_cb_chain(d); |
| |
| return NULL; |
| } |
| |
| static void bcm2835_dma_fill_cb_chain_with_sg( |
| struct dma_chan *chan, |
| enum dma_transfer_direction direction, |
| struct bcm2835_cb_entry *cb, |
| struct scatterlist *sgl, |
| unsigned int sg_len) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| size_t len, max_len; |
| unsigned int i; |
| dma_addr_t addr; |
| struct scatterlist *sgent; |
| |
| max_len = bcm2835_dma_max_frame_length(c); |
| for_each_sg(sgl, sgent, sg_len, i) { |
| for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent); |
| len > 0; |
| addr += cb->cb->length, len -= cb->cb->length, cb++) { |
| if (direction == DMA_DEV_TO_MEM) |
| cb->cb->dst = addr; |
| else |
| cb->cb->src = addr; |
| cb->cb->length = min(len, max_len); |
| } |
| } |
| } |
| |
| static int bcm2835_dma_abort(void __iomem *chan_base) |
| { |
| unsigned long cs; |
| long int timeout = 10000; |
| |
| cs = readl(chan_base + BCM2835_DMA_CS); |
| if (!(cs & BCM2835_DMA_ACTIVE)) |
| return 0; |
| |
| /* Write 0 to the active bit - Pause the DMA */ |
| writel(0, chan_base + BCM2835_DMA_CS); |
| |
| /* Wait for any current AXI transfer to complete */ |
| while ((cs & BCM2835_DMA_ISPAUSED) && --timeout) { |
| cpu_relax(); |
| cs = readl(chan_base + BCM2835_DMA_CS); |
| } |
| |
| /* We'll un-pause when we set of our next DMA */ |
| if (!timeout) |
| return -ETIMEDOUT; |
| |
| if (!(cs & BCM2835_DMA_ACTIVE)) |
| return 0; |
| |
| /* Terminate the control block chain */ |
| writel(0, chan_base + BCM2835_DMA_NEXTCB); |
| |
| /* Abort the whole DMA */ |
| writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE, |
| chan_base + BCM2835_DMA_CS); |
| |
| return 0; |
| } |
| |
| static void bcm2835_dma_start_desc(struct bcm2835_chan *c) |
| { |
| struct virt_dma_desc *vd = vchan_next_desc(&c->vc); |
| struct bcm2835_desc *d; |
| |
| if (!vd) { |
| c->desc = NULL; |
| return; |
| } |
| |
| list_del(&vd->node); |
| |
| c->desc = d = to_bcm2835_dma_desc(&vd->tx); |
| |
| writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR); |
| writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS); |
| } |
| |
| static irqreturn_t bcm2835_dma_callback(int irq, void *data) |
| { |
| struct bcm2835_chan *c = data; |
| struct bcm2835_desc *d; |
| unsigned long flags; |
| |
| /* check the shared interrupt */ |
| if (c->irq_flags & IRQF_SHARED) { |
| /* check if the interrupt is enabled */ |
| flags = readl(c->chan_base + BCM2835_DMA_CS); |
| /* if not set then we are not the reason for the irq */ |
| if (!(flags & BCM2835_DMA_INT)) |
| return IRQ_NONE; |
| } |
| |
| spin_lock_irqsave(&c->vc.lock, flags); |
| |
| /* Acknowledge interrupt */ |
| writel(BCM2835_DMA_INT, c->chan_base + BCM2835_DMA_CS); |
| |
| d = c->desc; |
| |
| if (d) { |
| if (d->cyclic) { |
| /* call the cyclic callback */ |
| vchan_cyclic_callback(&d->vd); |
| |
| /* Keep the DMA engine running */ |
| writel(BCM2835_DMA_ACTIVE, |
| c->chan_base + BCM2835_DMA_CS); |
| } else { |
| vchan_cookie_complete(&c->desc->vd); |
| bcm2835_dma_start_desc(c); |
| } |
| } |
| |
| spin_unlock_irqrestore(&c->vc.lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| struct device *dev = c->vc.chan.device->dev; |
| |
| dev_dbg(dev, "Allocating DMA channel %d\n", c->ch); |
| |
| c->cb_pool = dma_pool_create(dev_name(dev), dev, |
| sizeof(struct bcm2835_dma_cb), 0, 0); |
| if (!c->cb_pool) { |
| dev_err(dev, "unable to allocate descriptor pool\n"); |
| return -ENOMEM; |
| } |
| |
| return request_irq(c->irq_number, bcm2835_dma_callback, |
| c->irq_flags, "DMA IRQ", c); |
| } |
| |
| static void bcm2835_dma_free_chan_resources(struct dma_chan *chan) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| |
| vchan_free_chan_resources(&c->vc); |
| free_irq(c->irq_number, c); |
| dma_pool_destroy(c->cb_pool); |
| |
| dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->ch); |
| } |
| |
| static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d) |
| { |
| return d->size; |
| } |
| |
| static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr) |
| { |
| unsigned int i; |
| size_t size; |
| |
| for (size = i = 0; i < d->frames; i++) { |
| struct bcm2835_dma_cb *control_block = d->cb_list[i].cb; |
| size_t this_size = control_block->length; |
| dma_addr_t dma; |
| |
| if (d->dir == DMA_DEV_TO_MEM) |
| dma = control_block->dst; |
| else |
| dma = control_block->src; |
| |
| if (size) |
| size += this_size; |
| else if (addr >= dma && addr < dma + this_size) |
| size += dma + this_size - addr; |
| } |
| |
| return size; |
| } |
| |
| static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan, |
| dma_cookie_t cookie, struct dma_tx_state *txstate) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| struct virt_dma_desc *vd; |
| enum dma_status ret; |
| unsigned long flags; |
| |
| ret = dma_cookie_status(chan, cookie, txstate); |
| if (ret == DMA_COMPLETE || !txstate) |
| return ret; |
| |
| spin_lock_irqsave(&c->vc.lock, flags); |
| vd = vchan_find_desc(&c->vc, cookie); |
| if (vd) { |
| txstate->residue = |
| bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx)); |
| } else if (c->desc && c->desc->vd.tx.cookie == cookie) { |
| struct bcm2835_desc *d = c->desc; |
| dma_addr_t pos; |
| |
| if (d->dir == DMA_MEM_TO_DEV) |
| pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD); |
| else if (d->dir == DMA_DEV_TO_MEM) |
| pos = readl(c->chan_base + BCM2835_DMA_DEST_AD); |
| else |
| pos = 0; |
| |
| txstate->residue = bcm2835_dma_desc_size_pos(d, pos); |
| } else { |
| txstate->residue = 0; |
| } |
| |
| spin_unlock_irqrestore(&c->vc.lock, flags); |
| |
| return ret; |
| } |
| |
| static void bcm2835_dma_issue_pending(struct dma_chan *chan) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&c->vc.lock, flags); |
| if (vchan_issue_pending(&c->vc) && !c->desc) |
| bcm2835_dma_start_desc(c); |
| |
| spin_unlock_irqrestore(&c->vc.lock, flags); |
| } |
| |
| static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_memcpy( |
| struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, |
| size_t len, unsigned long flags) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| struct bcm2835_desc *d; |
| u32 info = BCM2835_DMA_D_INC | BCM2835_DMA_S_INC; |
| u32 extra = BCM2835_DMA_INT_EN | BCM2835_DMA_WAIT_RESP; |
| size_t max_len = bcm2835_dma_max_frame_length(c); |
| size_t frames; |
| |
| /* if src, dst or len is not given return with an error */ |
| if (!src || !dst || !len) |
| return NULL; |
| |
| /* calculate number of frames */ |
| frames = bcm2835_dma_frames_for_length(len, max_len); |
| |
| /* allocate the CB chain - this also fills in the pointers */ |
| d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false, |
| info, extra, frames, |
| src, dst, len, 0, GFP_KERNEL); |
| if (!d) |
| return NULL; |
| |
| return vchan_tx_prep(&c->vc, &d->vd, flags); |
| } |
| |
| static struct dma_async_tx_descriptor *bcm2835_dma_prep_slave_sg( |
| struct dma_chan *chan, |
| struct scatterlist *sgl, unsigned int sg_len, |
| enum dma_transfer_direction direction, |
| unsigned long flags, void *context) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| struct bcm2835_desc *d; |
| dma_addr_t src = 0, dst = 0; |
| u32 info = BCM2835_DMA_WAIT_RESP; |
| u32 extra = BCM2835_DMA_INT_EN; |
| size_t frames; |
| |
| if (!is_slave_direction(direction)) { |
| dev_err(chan->device->dev, |
| "%s: bad direction?\n", __func__); |
| return NULL; |
| } |
| |
| if (c->dreq != 0) |
| info |= BCM2835_DMA_PER_MAP(c->dreq); |
| |
| if (direction == DMA_DEV_TO_MEM) { |
| if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) |
| return NULL; |
| src = c->cfg.src_addr; |
| info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; |
| } else { |
| if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) |
| return NULL; |
| dst = c->cfg.dst_addr; |
| info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; |
| } |
| |
| /* count frames in sg list */ |
| frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len); |
| |
| /* allocate the CB chain */ |
| d = bcm2835_dma_create_cb_chain(chan, direction, false, |
| info, extra, |
| frames, src, dst, 0, 0, |
| GFP_KERNEL); |
| if (!d) |
| return NULL; |
| |
| /* fill in frames with scatterlist pointers */ |
| bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list, |
| sgl, sg_len); |
| |
| return vchan_tx_prep(&c->vc, &d->vd, flags); |
| } |
| |
| static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( |
| struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, |
| size_t period_len, enum dma_transfer_direction direction, |
| unsigned long flags) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| struct bcm2835_desc *d; |
| dma_addr_t src, dst; |
| u32 info = BCM2835_DMA_WAIT_RESP; |
| u32 extra = BCM2835_DMA_INT_EN; |
| size_t max_len = bcm2835_dma_max_frame_length(c); |
| size_t frames; |
| |
| /* Grab configuration */ |
| if (!is_slave_direction(direction)) { |
| dev_err(chan->device->dev, "%s: bad direction?\n", __func__); |
| return NULL; |
| } |
| |
| if (!buf_len) { |
| dev_err(chan->device->dev, |
| "%s: bad buffer length (= 0)\n", __func__); |
| return NULL; |
| } |
| |
| /* |
| * warn if buf_len is not a multiple of period_len - this may leed |
| * to unexpected latencies for interrupts and thus audiable clicks |
| */ |
| if (buf_len % period_len) |
| dev_warn_once(chan->device->dev, |
| "%s: buffer_length (%zd) is not a multiple of period_len (%zd)\n", |
| __func__, buf_len, period_len); |
| |
| /* Setup DREQ channel */ |
| if (c->dreq != 0) |
| info |= BCM2835_DMA_PER_MAP(c->dreq); |
| |
| if (direction == DMA_DEV_TO_MEM) { |
| if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) |
| return NULL; |
| src = c->cfg.src_addr; |
| dst = buf_addr; |
| info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC; |
| } else { |
| if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) |
| return NULL; |
| dst = c->cfg.dst_addr; |
| src = buf_addr; |
| info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC; |
| } |
| |
| /* calculate number of frames */ |
| frames = /* number of periods */ |
| DIV_ROUND_UP(buf_len, period_len) * |
| /* number of frames per period */ |
| bcm2835_dma_frames_for_length(period_len, max_len); |
| |
| /* |
| * allocate the CB chain |
| * note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine |
| * implementation calls prep_dma_cyclic with interrupts disabled. |
| */ |
| d = bcm2835_dma_create_cb_chain(chan, direction, true, |
| info, extra, |
| frames, src, dst, buf_len, |
| period_len, GFP_NOWAIT); |
| if (!d) |
| return NULL; |
| |
| /* wrap around into a loop */ |
| d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr; |
| |
| return vchan_tx_prep(&c->vc, &d->vd, flags); |
| } |
| |
| static int bcm2835_dma_slave_config(struct dma_chan *chan, |
| struct dma_slave_config *cfg) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| |
| if ((cfg->direction == DMA_DEV_TO_MEM && |
| cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || |
| (cfg->direction == DMA_MEM_TO_DEV && |
| cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || |
| !is_slave_direction(cfg->direction)) { |
| return -EINVAL; |
| } |
| |
| c->cfg = *cfg; |
| |
| return 0; |
| } |
| |
| static int bcm2835_dma_terminate_all(struct dma_chan *chan) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device); |
| unsigned long flags; |
| int timeout = 10000; |
| LIST_HEAD(head); |
| |
| spin_lock_irqsave(&c->vc.lock, flags); |
| |
| /* Prevent this channel being scheduled */ |
| spin_lock(&d->lock); |
| list_del_init(&c->node); |
| spin_unlock(&d->lock); |
| |
| /* |
| * Stop DMA activity: we assume the callback will not be called |
| * after bcm_dma_abort() returns (even if it does, it will see |
| * c->desc is NULL and exit.) |
| */ |
| if (c->desc) { |
| vchan_terminate_vdesc(&c->desc->vd); |
| c->desc = NULL; |
| bcm2835_dma_abort(c->chan_base); |
| |
| /* Wait for stopping */ |
| while (--timeout) { |
| if (!(readl(c->chan_base + BCM2835_DMA_CS) & |
| BCM2835_DMA_ACTIVE)) |
| break; |
| |
| cpu_relax(); |
| } |
| |
| if (!timeout) |
| dev_err(d->ddev.dev, "DMA transfer could not be terminated\n"); |
| } |
| |
| vchan_get_all_descriptors(&c->vc, &head); |
| spin_unlock_irqrestore(&c->vc.lock, flags); |
| vchan_dma_desc_free_list(&c->vc, &head); |
| |
| return 0; |
| } |
| |
| static void bcm2835_dma_synchronize(struct dma_chan *chan) |
| { |
| struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); |
| |
| vchan_synchronize(&c->vc); |
| } |
| |
| static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, |
| int irq, unsigned int irq_flags) |
| { |
| struct bcm2835_chan *c; |
| |
| c = devm_kzalloc(d->ddev.dev, sizeof(*c), GFP_KERNEL); |
| if (!c) |
| return -ENOMEM; |
| |
| c->vc.desc_free = bcm2835_dma_desc_free; |
| vchan_init(&c->vc, &d->ddev); |
| INIT_LIST_HEAD(&c->node); |
| |
| c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id); |
| c->ch = chan_id; |
| c->irq_number = irq; |
| c->irq_flags = irq_flags; |
| |
| /* check in DEBUG register if this is a LITE channel */ |
| if (readl(c->chan_base + BCM2835_DMA_DEBUG) & |
| BCM2835_DMA_DEBUG_LITE) |
| c->is_lite_channel = true; |
| |
| return 0; |
| } |
| |
| static void bcm2835_dma_free(struct bcm2835_dmadev *od) |
| { |
| struct bcm2835_chan *c, *next; |
| |
| list_for_each_entry_safe(c, next, &od->ddev.channels, |
| vc.chan.device_node) { |
| list_del(&c->vc.chan.device_node); |
| tasklet_kill(&c->vc.task); |
| } |
| } |
| |
| static const struct of_device_id bcm2835_dma_of_match[] = { |
| { .compatible = "brcm,bcm2835-dma", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); |
| |
| static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *spec, |
| struct of_dma *ofdma) |
| { |
| struct bcm2835_dmadev *d = ofdma->of_dma_data; |
| struct dma_chan *chan; |
| |
| chan = dma_get_any_slave_channel(&d->ddev); |
| if (!chan) |
| return NULL; |
| |
| /* Set DREQ from param */ |
| to_bcm2835_dma_chan(chan)->dreq = spec->args[0]; |
| |
| return chan; |
| } |
| |
| static int bcm2835_dma_probe(struct platform_device *pdev) |
| { |
| struct bcm2835_dmadev *od; |
| struct resource *res; |
| void __iomem *base; |
| int rc; |
| int i, j; |
| int irq[BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1]; |
| int irq_flags; |
| uint32_t chans_available; |
| char chan_name[BCM2835_DMA_CHAN_NAME_SIZE]; |
| |
| if (!pdev->dev.dma_mask) |
| pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; |
| |
| rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (rc) |
| return rc; |
| |
| od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); |
| if (!od) |
| return -ENOMEM; |
| |
| pdev->dev.dma_parms = &od->dma_parms; |
| dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| od->base = base; |
| |
| dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); |
| dma_cap_set(DMA_PRIVATE, od->ddev.cap_mask); |
| dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); |
| dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); |
| dma_cap_set(DMA_MEMCPY, od->ddev.cap_mask); |
| od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources; |
| od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources; |
| od->ddev.device_tx_status = bcm2835_dma_tx_status; |
| od->ddev.device_issue_pending = bcm2835_dma_issue_pending; |
| od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic; |
| od->ddev.device_prep_slave_sg = bcm2835_dma_prep_slave_sg; |
| od->ddev.device_prep_dma_memcpy = bcm2835_dma_prep_dma_memcpy; |
| od->ddev.device_config = bcm2835_dma_slave_config; |
| od->ddev.device_terminate_all = bcm2835_dma_terminate_all; |
| od->ddev.device_synchronize = bcm2835_dma_synchronize; |
| od->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); |
| od->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); |
| od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) | |
| BIT(DMA_MEM_TO_MEM); |
| od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; |
| od->ddev.dev = &pdev->dev; |
| INIT_LIST_HEAD(&od->ddev.channels); |
| spin_lock_init(&od->lock); |
| |
| platform_set_drvdata(pdev, od); |
| |
| /* Request DMA channel mask from device tree */ |
| if (of_property_read_u32(pdev->dev.of_node, |
| "brcm,dma-channel-mask", |
| &chans_available)) { |
| dev_err(&pdev->dev, "Failed to get channel mask\n"); |
| rc = -EINVAL; |
| goto err_no_dma; |
| } |
| |
| /* get irqs for each channel that we support */ |
| for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { |
| /* skip masked out channels */ |
| if (!(chans_available & (1 << i))) { |
| irq[i] = -1; |
| continue; |
| } |
| |
| /* get the named irq */ |
| snprintf(chan_name, sizeof(chan_name), "dma%i", i); |
| irq[i] = platform_get_irq_byname(pdev, chan_name); |
| if (irq[i] >= 0) |
| continue; |
| |
| /* legacy device tree case handling */ |
| dev_warn_once(&pdev->dev, |
| "missing interrupt-names property in device tree - legacy interpretation is used\n"); |
| /* |
| * in case of channel >= 11 |
| * use the 11th interrupt and that is shared |
| */ |
| irq[i] = platform_get_irq(pdev, i < 11 ? i : 11); |
| } |
| |
| /* get irqs for each channel */ |
| for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) { |
| /* skip channels without irq */ |
| if (irq[i] < 0) |
| continue; |
| |
| /* check if there are other channels that also use this irq */ |
| irq_flags = 0; |
| for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++) |
| if ((i != j) && (irq[j] == irq[i])) { |
| irq_flags = IRQF_SHARED; |
| break; |
| } |
| |
| /* initialize the channel */ |
| rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags); |
| if (rc) |
| goto err_no_dma; |
| } |
| |
| dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); |
| |
| /* Device-tree DMA controller registration */ |
| rc = of_dma_controller_register(pdev->dev.of_node, |
| bcm2835_dma_xlate, od); |
| if (rc) { |
| dev_err(&pdev->dev, "Failed to register DMA controller\n"); |
| goto err_no_dma; |
| } |
| |
| rc = dma_async_device_register(&od->ddev); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Failed to register slave DMA engine device: %d\n", rc); |
| goto err_no_dma; |
| } |
| |
| dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n"); |
| |
| return 0; |
| |
| err_no_dma: |
| bcm2835_dma_free(od); |
| return rc; |
| } |
| |
| static int bcm2835_dma_remove(struct platform_device *pdev) |
| { |
| struct bcm2835_dmadev *od = platform_get_drvdata(pdev); |
| |
| dma_async_device_unregister(&od->ddev); |
| bcm2835_dma_free(od); |
| |
| return 0; |
| } |
| |
| static struct platform_driver bcm2835_dma_driver = { |
| .probe = bcm2835_dma_probe, |
| .remove = bcm2835_dma_remove, |
| .driver = { |
| .name = "bcm2835-dma", |
| .of_match_table = of_match_ptr(bcm2835_dma_of_match), |
| }, |
| }; |
| |
| module_platform_driver(bcm2835_dma_driver); |
| |
| MODULE_ALIAS("platform:bcm2835-dma"); |
| MODULE_DESCRIPTION("BCM2835 DMA engine driver"); |
| MODULE_AUTHOR("Florian Meier <florian.meier@koalo.de>"); |
| MODULE_LICENSE("GPL v2"); |