| #ifndef __ASM_SH_CPU_SH5_IRQ_H |
| #define __ASM_SH_CPU_SH5_IRQ_H |
| |
| /* |
| * include/asm-sh/cpu-sh5/irq.h |
| * |
| * Copyright (C) 2000, 2001 Paolo Alberelli |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| |
| /* |
| * Encoded IRQs are not considered worth to be supported. |
| * Main reason is that there's no per-encoded-interrupt |
| * enable/disable mechanism (as there was in SH3/4). |
| * An all enabled/all disabled is worth only if there's |
| * a cascaded IC to disable/enable/ack on. Until such |
| * IC is available there's no such support. |
| * |
| * Presumably Encoded IRQs may use extra IRQs beyond 64, |
| * below. Some logic must be added to cope with IRQ_IRL? |
| * in an exclusive way. |
| * |
| * Priorities are set at Platform level, when IRQ_IRL0-3 |
| * are set to 0 Encoding is allowed. Otherwise it's not |
| * allowed. |
| */ |
| |
| /* Independent IRQs */ |
| #define IRQ_IRL0 0 |
| #define IRQ_IRL1 1 |
| #define IRQ_IRL2 2 |
| #define IRQ_IRL3 3 |
| |
| #define IRQ_INTA 4 |
| #define IRQ_INTB 5 |
| #define IRQ_INTC 6 |
| #define IRQ_INTD 7 |
| |
| #define IRQ_SERR 12 |
| #define IRQ_ERR 13 |
| #define IRQ_PWR3 14 |
| #define IRQ_PWR2 15 |
| #define IRQ_PWR1 16 |
| #define IRQ_PWR0 17 |
| |
| #define IRQ_DMTE0 18 |
| #define IRQ_DMTE1 19 |
| #define IRQ_DMTE2 20 |
| #define IRQ_DMTE3 21 |
| #define IRQ_DAERR 22 |
| |
| #define IRQ_TUNI0 32 |
| #define IRQ_TUNI1 33 |
| #define IRQ_TUNI2 34 |
| #define IRQ_TICPI2 35 |
| |
| #define IRQ_ATI 36 |
| #define IRQ_PRI 37 |
| #define IRQ_CUI 38 |
| |
| #define IRQ_ERI 39 |
| #define IRQ_RXI 40 |
| #define IRQ_BRI 41 |
| #define IRQ_TXI 42 |
| |
| #define IRQ_ITI 63 |
| |
| #define NR_INTC_IRQS 64 |
| |
| #ifdef CONFIG_SH_CAYMAN |
| #define NR_EXT_IRQS 32 |
| #define START_EXT_IRQS 64 |
| |
| /* PCI bus 2 uses encoded external interrupts on the Cayman board */ |
| #define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0) |
| #define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1) |
| #define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2) |
| #define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3) |
| |
| #define I8042_KBD_IRQ (START_EXT_IRQS + 2) |
| #define I8042_AUX_IRQ (START_EXT_IRQS + 6) |
| |
| #define IRQ_CFCARD (START_EXT_IRQS + 7) |
| #define IRQ_PCMCIA (0) |
| |
| #else |
| #define NR_EXT_IRQS 0 |
| #endif |
| |
| /* Default IRQs, fixed */ |
| #define TIMER_IRQ IRQ_TUNI0 |
| #define RTC_IRQ IRQ_CUI |
| |
| /* Default Priorities, Platform may choose differently */ |
| #define NO_PRIORITY 0 /* Disabled */ |
| #define TIMER_PRIORITY 2 |
| #define RTC_PRIORITY TIMER_PRIORITY |
| #define SCIF_PRIORITY 3 |
| #define INTD_PRIORITY 3 |
| #define IRL3_PRIORITY 4 |
| #define INTC_PRIORITY 6 |
| #define IRL2_PRIORITY 7 |
| #define INTB_PRIORITY 9 |
| #define IRL1_PRIORITY 10 |
| #define INTA_PRIORITY 12 |
| #define IRL0_PRIORITY 13 |
| #define TOP_PRIORITY 15 |
| |
| extern int intc_evt_to_irq[(0xE20/0x20)+1]; |
| extern int platform_int_priority[NR_INTC_IRQS]; |
| |
| #endif /* __ASM_SH_CPU_SH5_IRQ_H */ |