| Lars-Peter Clausen | b6b5e76 | 2013-05-23 20:14:50 +0200 | [diff] [blame] | 1 | SSM2518 audio amplifier |
| 2 | |
| 3 | This device supports I2C only. |
| 4 | |
| 5 | Required properties: |
| 6 | - compatible : Must be "adi,ssm2518" |
| 7 | - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low) |
| 8 | or 0x35 (ADDR pin high) |
| 9 | |
| 10 | Optional properties: |
| 11 | - gpios : GPIO connected to the nSD pin. If the property is not present it is |
| 12 | assumed that the nSD pin is hardwired to always on. |
| 13 | |
| 14 | Example: |
| 15 | |
| 16 | ssm2518: ssm2518@34 { |
| 17 | compatible = "adi,ssm2518"; |
| 18 | reg = <0x34>; |
| 19 | gpios = <&gpio 5 0>; |
| 20 | }; |
