| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012 Regents of the University of California | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/of.h> | |
| #include <asm/hwcap.h> | |
| #include <asm/smp.h> | |
| #include <asm/pgtable.h> | |
| /* | |
| * Returns the hart ID of the given device tree node, or -ENODEV if the node | |
| * isn't an enabled and valid RISC-V hart node. | |
| */ | |
| int riscv_of_processor_hartid(struct device_node *node, unsigned long *hart) | |
| { | |
| const char *isa; | |
| if (!of_device_is_compatible(node, "riscv")) { | |
| pr_warn("Found incompatible CPU\n"); | |
| return -ENODEV; | |
| } | |
| *hart = (unsigned long) of_get_cpu_hwid(node, 0); | |
| if (*hart == ~0UL) { | |
| pr_warn("Found CPU without hart ID\n"); | |
| return -ENODEV; | |
| } | |
| if (!of_device_is_available(node)) { | |
| pr_info("CPU with hartid=%lu is not available\n", *hart); | |
| return -ENODEV; | |
| } | |
| if (of_property_read_string(node, "riscv,isa", &isa)) { | |
| pr_warn("CPU with hartid=%lu has no \"riscv,isa\" property\n", *hart); | |
| return -ENODEV; | |
| } | |
| if (isa[0] != 'r' || isa[1] != 'v') { | |
| pr_warn("CPU with hartid=%lu has an invalid ISA of \"%s\"\n", *hart, isa); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Find hart ID of the CPU DT node under which given DT node falls. | |
| * | |
| * To achieve this, we walk up the DT tree until we find an active | |
| * RISC-V core (HART) node and extract the cpuid from it. | |
| */ | |
| int riscv_of_parent_hartid(struct device_node *node, unsigned long *hartid) | |
| { | |
| int rc; | |
| for (; node; node = node->parent) { | |
| if (of_device_is_compatible(node, "riscv")) { | |
| rc = riscv_of_processor_hartid(node, hartid); | |
| if (!rc) | |
| return 0; | |
| } | |
| } | |
| return -1; | |
| } | |
| #ifdef CONFIG_PROC_FS | |
| #define __RISCV_ISA_EXT_DATA(UPROP, EXTID) \ | |
| { \ | |
| .uprop = #UPROP, \ | |
| .isa_ext_id = EXTID, \ | |
| } | |
| /* | |
| * Here are the ordering rules of extension naming defined by RISC-V | |
| * specification : | |
| * 1. All extensions should be separated from other multi-letter extensions | |
| * by an underscore. | |
| * 2. The first letter following the 'Z' conventionally indicates the most | |
| * closely related alphabetical extension category, IMAFDQLCBKJTPVH. | |
| * If multiple 'Z' extensions are named, they should be ordered first | |
| * by category, then alphabetically within a category. | |
| * 3. Standard supervisor-level extensions (starts with 'S') should be | |
| * listed after standard unprivileged extensions. If multiple | |
| * supervisor-level extensions are listed, they should be ordered | |
| * alphabetically. | |
| * 4. Non-standard extensions (starts with 'X') must be listed after all | |
| * standard extensions. They must be separated from other multi-letter | |
| * extensions by an underscore. | |
| */ | |
| static struct riscv_isa_ext_data isa_ext_arr[] = { | |
| __RISCV_ISA_EXT_DATA(sscofpmf, RISCV_ISA_EXT_SSCOFPMF), | |
| __RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT), | |
| __RISCV_ISA_EXT_DATA(zicbom, RISCV_ISA_EXT_ZICBOM), | |
| __RISCV_ISA_EXT_DATA(zihintpause, RISCV_ISA_EXT_ZIHINTPAUSE), | |
| __RISCV_ISA_EXT_DATA(sstc, RISCV_ISA_EXT_SSTC), | |
| __RISCV_ISA_EXT_DATA("", RISCV_ISA_EXT_MAX), | |
| }; | |
| static void print_isa_ext(struct seq_file *f) | |
| { | |
| struct riscv_isa_ext_data *edata; | |
| int i = 0, arr_sz; | |
| arr_sz = ARRAY_SIZE(isa_ext_arr) - 1; | |
| /* No extension support available */ | |
| if (arr_sz <= 0) | |
| return; | |
| for (i = 0; i <= arr_sz; i++) { | |
| edata = &isa_ext_arr[i]; | |
| if (!__riscv_isa_extension_available(NULL, edata->isa_ext_id)) | |
| continue; | |
| seq_printf(f, "_%s", edata->uprop); | |
| } | |
| } | |
| /* | |
| * These are the only valid base (single letter) ISA extensions as per the spec. | |
| * It also specifies the canonical order in which it appears in the spec. | |
| * Some of the extension may just be a place holder for now (B, K, P, J). | |
| * This should be updated once corresponding extensions are ratified. | |
| */ | |
| static const char base_riscv_exts[13] = "imafdqcbkjpvh"; | |
| static void print_isa(struct seq_file *f, const char *isa) | |
| { | |
| int i; | |
| seq_puts(f, "isa\t\t: "); | |
| /* Print the rv[64/32] part */ | |
| seq_write(f, isa, 4); | |
| for (i = 0; i < sizeof(base_riscv_exts); i++) { | |
| if (__riscv_isa_extension_available(NULL, base_riscv_exts[i] - 'a')) | |
| /* Print only enabled the base ISA extensions */ | |
| seq_write(f, &base_riscv_exts[i], 1); | |
| } | |
| print_isa_ext(f); | |
| seq_puts(f, "\n"); | |
| } | |
| static void print_mmu(struct seq_file *f) | |
| { | |
| char sv_type[16]; | |
| #ifdef CONFIG_MMU | |
| #if defined(CONFIG_32BIT) | |
| strncpy(sv_type, "sv32", 5); | |
| #elif defined(CONFIG_64BIT) | |
| if (pgtable_l5_enabled) | |
| strncpy(sv_type, "sv57", 5); | |
| else if (pgtable_l4_enabled) | |
| strncpy(sv_type, "sv48", 5); | |
| else | |
| strncpy(sv_type, "sv39", 5); | |
| #endif | |
| #else | |
| strncpy(sv_type, "none", 5); | |
| #endif /* CONFIG_MMU */ | |
| seq_printf(f, "mmu\t\t: %s\n", sv_type); | |
| } | |
| static void *c_start(struct seq_file *m, loff_t *pos) | |
| { | |
| *pos = cpumask_next(*pos - 1, cpu_online_mask); | |
| if ((*pos) < nr_cpu_ids) | |
| return (void *)(uintptr_t)(1 + *pos); | |
| return NULL; | |
| } | |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) | |
| { | |
| (*pos)++; | |
| return c_start(m, pos); | |
| } | |
| static void c_stop(struct seq_file *m, void *v) | |
| { | |
| } | |
| static int c_show(struct seq_file *m, void *v) | |
| { | |
| unsigned long cpu_id = (unsigned long)v - 1; | |
| struct device_node *node = of_get_cpu_node(cpu_id, NULL); | |
| const char *compat, *isa; | |
| seq_printf(m, "processor\t: %lu\n", cpu_id); | |
| seq_printf(m, "hart\t\t: %lu\n", cpuid_to_hartid_map(cpu_id)); | |
| if (!of_property_read_string(node, "riscv,isa", &isa)) | |
| print_isa(m, isa); | |
| print_mmu(m); | |
| if (!of_property_read_string(node, "compatible", &compat) | |
| && strcmp(compat, "riscv")) | |
| seq_printf(m, "uarch\t\t: %s\n", compat); | |
| seq_puts(m, "\n"); | |
| of_node_put(node); | |
| return 0; | |
| } | |
| const struct seq_operations cpuinfo_op = { | |
| .start = c_start, | |
| .next = c_next, | |
| .stop = c_stop, | |
| .show = c_show | |
| }; | |
| #endif /* CONFIG_PROC_FS */ |