blob: 2ab92409210afc0cc8cf54da3bef2392abd7d5c3 [file] [log] [blame] [edit]
# SPDX-License-Identifier: GPL-2.0
#
# PCI configuration
#
# select this to offer the PCI prompt
config HAVE_PCI
bool
# select this to unconditionally force on PCI support
config FORCE_PCI
bool
select HAVE_PCI
select PCI
menuconfig PCI
bool "PCI support"
depends on HAVE_PCI
help
This option enables support for the PCI local bus, including
support for PCI-X and the foundations for PCI Express support.
Say 'Y' here unless you know what you are doing.
if PCI
config PCI_DOMAINS
bool
depends on PCI
config PCI_DOMAINS_GENERIC
bool
select PCI_DOMAINS
config PCI_SYSCALL
bool
source "drivers/pci/pcie/Kconfig"
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
select GENERIC_MSI_IRQ
help
This allows device drivers to enable MSI (Message Signaled
Interrupts). Message Signaled Interrupts enable a device to
generate an interrupt using an inbound Memory Write on its
PCI bus instead of asserting a device IRQ pin.
Use of PCI MSI interrupts can be disabled at kernel boot time
by using the 'pci=nomsi' option. This disables MSI for the
entire system.
If you don't know what to do here, say Y.
config PCI_MSI_IRQ_DOMAIN
def_bool ARC || ARM || ARM64 || X86
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
config PCI_QUIRKS
default y
bool "Enable PCI quirk workarounds" if EXPERT
help
This enables workarounds for various PCI chipset bugs/quirks.
Disable this only if your target machine is unaffected by PCI
quirks.
config PCI_DEBUG
bool "PCI Debugging"
depends on DEBUG_KERNEL
help
Say Y here if you want the PCI core to produce a bunch of debug
messages to the system log. Select this if you are having a
problem with PCI support and want to see more of what is going on.
When in doubt, say N.
config PCI_REALLOC_ENABLE_AUTO
bool "Enable PCI resource re-allocation detection"
depends on PCI_IOV
help
Say Y here if you want the PCI core to detect if PCI resource
re-allocation needs to be enabled. You can always use pci=realloc=on
or pci=realloc=off to override it. It will automatically
re-allocate PCI resources if SR-IOV BARs have not been allocated by
the BIOS.
When in doubt, say N.
config PCI_STUB
tristate "PCI Stub driver"
help
Say Y or M here if you want be able to reserve a PCI device
when it is going to be assigned to a guest operating system.
When in doubt, say N.
config PCI_PF_STUB
tristate "PCI PF Stub driver"
depends on PCI_IOV
help
Say Y or M here if you want to enable support for devices that
require SR-IOV support, while at the same time the PF (Physical
Function) itself is not providing any actual services on the
host itself such as storage or networking.
When in doubt, say N.
config XEN_PCIDEV_FRONTEND
tristate "Xen PCI Frontend"
depends on X86 && XEN
select PCI_XEN
select XEN_XENBUS_FRONTEND
default y
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
config PCI_ATS
bool
config PCI_ECAM
bool
config PCI_LOCKLESS_CONFIG
bool
config PCI_BRIDGE_EMUL
bool
config PCI_IOV
bool "PCI IOV support"
select PCI_ATS
help
I/O Virtualization is a PCI feature supported by some devices
which allows them to create virtual devices which share their
physical resources.
If unsure, say N.
config PCI_PRI
bool "PCI PRI support"
select PCI_ATS
help
PRI is the PCI Page Request Interface. It allows PCI devices that are
behind an IOMMU to recover from page faults.
If unsure, say N.
config PCI_PASID
bool "PCI PASID support"
select PCI_ATS
help
Process Address Space Identifiers (PASIDs) can be used by PCI devices
to access more than one IO address space at the same time. To make
use of this feature an IOMMU is required which also supports PASIDs.
Select this option if you have such an IOMMU and want to compile the
driver for it into your kernel.
If unsure, say N.
config PCI_P2PDMA
bool "PCI peer-to-peer transfer support"
depends on ZONE_DEVICE
select GENERIC_ALLOCATOR
help
Enableѕ drivers to do PCI peer-to-peer transactions to and from
BARs that are exposed in other devices that are the part of
the hierarchy where peer-to-peer DMA is guaranteed by the PCI
specification to work (ie. anything below a single PCI bridge).
Many PCIe root complexes do not support P2P transactions and
it's hard to tell which support it at all, so at this time,
P2P DMA transations must be between devices behind the same root
port.
If unsure, say N.
config PCI_LABEL
def_bool y if (DMI || ACPI)
select NLS
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
source "drivers/pci/hotplug/Kconfig"
source "drivers/pci/controller/Kconfig"
source "drivers/pci/endpoint/Kconfig"
source "drivers/pci/switch/Kconfig"
endif