| Kernel driver lm92 |
| ================== |
| |
| Supported chips: |
| * National Semiconductor LM92 |
| Prefix: 'lm92' |
| Addresses scanned: I2C 0x48 - 0x4b |
| Datasheet: http://www.national.com/pf/LM/LM92.html |
| * National Semiconductor LM76 |
| Prefix: 'lm92' |
| Addresses scanned: none, force parameter needed |
| Datasheet: http://www.national.com/pf/LM/LM76.html |
| * Maxim MAX6633/MAX6634/MAX6635 |
| Prefix: 'max6635' |
| Addresses scanned: none, force parameter needed |
| Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 |
| |
| Authors: |
| Abraham van der Merwe <abraham@2d3d.co.za> |
| Jean Delvare <jdelvare@suse.de> |
| |
| |
| Description |
| ----------- |
| |
| This driver implements support for the National Semiconductor LM92 |
| temperature sensor. |
| |
| Each LM92 temperature sensor supports a single temperature sensor. There are |
| alarms for high, low, and critical thresholds. There's also an hysteresis to |
| control the thresholds for resetting alarms. |
| |
| Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635, |
| which are mostly compatible. They have not all been tested, so you |
| may need to use the force parameter. |
