| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores. |
| * |
| * 2013 (c) Aeroflex Gaisler AB |
| * |
| * This driver supports the GRGPIO GPIO core available in the GRLIB VHDL |
| * IP core library. |
| * |
| * Full documentation of the GRGPIO core can be found here: |
| * http://www.gaisler.com/products/grlib/grip.pdf |
| * |
| * See "Documentation/devicetree/bindings/gpio/gpio-grgpio.txt" for |
| * information on open firmware properties. |
| * |
| * Contributors: Andreas Larsson <andreas@gaisler.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/bitops.h> |
| |
| #define GRGPIO_MAX_NGPIO 32 |
| |
| #define GRGPIO_DATA 0x00 |
| #define GRGPIO_OUTPUT 0x04 |
| #define GRGPIO_DIR 0x08 |
| #define GRGPIO_IMASK 0x0c |
| #define GRGPIO_IPOL 0x10 |
| #define GRGPIO_IEDGE 0x14 |
| #define GRGPIO_BYPASS 0x18 |
| #define GRGPIO_IMAP_BASE 0x20 |
| |
| /* Structure for an irq of the core - called an underlying irq */ |
| struct grgpio_uirq { |
| u8 refcnt; /* Reference counter to manage requesting/freeing of uirq */ |
| u8 uirq; /* Underlying irq of the gpio driver */ |
| }; |
| |
| /* |
| * Structure for an irq of a gpio line handed out by this driver. The index is |
| * used to map to the corresponding underlying irq. |
| */ |
| struct grgpio_lirq { |
| s8 index; /* Index into struct grgpio_priv's uirqs, or -1 */ |
| u8 irq; /* irq for the gpio line */ |
| }; |
| |
| struct grgpio_priv { |
| struct gpio_chip gc; |
| void __iomem *regs; |
| struct device *dev; |
| |
| u32 imask; /* irq mask shadow register */ |
| |
| /* |
| * The grgpio core can have multiple "underlying" irqs. The gpio lines |
| * can be mapped to any one or none of these underlying irqs |
| * independently of each other. This driver sets up an irq domain and |
| * hands out separate irqs to each gpio line |
| */ |
| struct irq_domain *domain; |
| |
| /* |
| * This array contains information on each underlying irq, each |
| * irq of the grgpio core itself. |
| */ |
| struct grgpio_uirq uirqs[GRGPIO_MAX_NGPIO]; |
| |
| /* |
| * This array contains information for each gpio line on the irqs |
| * obtains from this driver. An index value of -1 for a certain gpio |
| * line indicates that the line has no irq. Otherwise the index connects |
| * the irq to the underlying irq by pointing into the uirqs array. |
| */ |
| struct grgpio_lirq lirqs[GRGPIO_MAX_NGPIO]; |
| }; |
| |
| static void grgpio_set_imask(struct grgpio_priv *priv, unsigned int offset, |
| int val) |
| { |
| struct gpio_chip *gc = &priv->gc; |
| |
| if (val) |
| priv->imask |= BIT(offset); |
| else |
| priv->imask &= ~BIT(offset); |
| gc->write_reg(priv->regs + GRGPIO_IMASK, priv->imask); |
| } |
| |
| static int grgpio_to_irq(struct gpio_chip *gc, unsigned offset) |
| { |
| struct grgpio_priv *priv = gpiochip_get_data(gc); |
| |
| if (offset >= gc->ngpio) |
| return -ENXIO; |
| |
| if (priv->lirqs[offset].index < 0) |
| return -ENXIO; |
| |
| return irq_create_mapping(priv->domain, offset); |
| } |
| |
| /* -------------------- IRQ chip functions -------------------- */ |
| |
| static int grgpio_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); |
| unsigned long flags; |
| u32 mask = BIT(d->hwirq); |
| u32 ipol; |
| u32 iedge; |
| u32 pol; |
| u32 edge; |
| |
| switch (type) { |
| case IRQ_TYPE_LEVEL_LOW: |
| pol = 0; |
| edge = 0; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| pol = mask; |
| edge = 0; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| pol = 0; |
| edge = mask; |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| pol = mask; |
| edge = mask; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| ipol = priv->gc.read_reg(priv->regs + GRGPIO_IPOL) & ~mask; |
| iedge = priv->gc.read_reg(priv->regs + GRGPIO_IEDGE) & ~mask; |
| |
| priv->gc.write_reg(priv->regs + GRGPIO_IPOL, ipol | pol); |
| priv->gc.write_reg(priv->regs + GRGPIO_IEDGE, iedge | edge); |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| |
| return 0; |
| } |
| |
| static void grgpio_irq_mask(struct irq_data *d) |
| { |
| struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); |
| int offset = d->hwirq; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| grgpio_set_imask(priv, offset, 0); |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| } |
| |
| static void grgpio_irq_unmask(struct irq_data *d) |
| { |
| struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); |
| int offset = d->hwirq; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| grgpio_set_imask(priv, offset, 1); |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| } |
| |
| static struct irq_chip grgpio_irq_chip = { |
| .name = "grgpio", |
| .irq_mask = grgpio_irq_mask, |
| .irq_unmask = grgpio_irq_unmask, |
| .irq_set_type = grgpio_irq_set_type, |
| }; |
| |
| static irqreturn_t grgpio_irq_handler(int irq, void *dev) |
| { |
| struct grgpio_priv *priv = dev; |
| int ngpio = priv->gc.ngpio; |
| unsigned long flags; |
| int i; |
| int match = 0; |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| /* |
| * For each gpio line, call its interrupt handler if it its underlying |
| * irq matches the current irq that is handled. |
| */ |
| for (i = 0; i < ngpio; i++) { |
| struct grgpio_lirq *lirq = &priv->lirqs[i]; |
| |
| if (priv->imask & BIT(i) && lirq->index >= 0 && |
| priv->uirqs[lirq->index].uirq == irq) { |
| generic_handle_irq(lirq->irq); |
| match = 1; |
| } |
| } |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| |
| if (!match) |
| dev_warn(priv->dev, "No gpio line matched irq %d\n", irq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * This function will be called as a consequence of the call to |
| * irq_create_mapping in grgpio_to_irq |
| */ |
| static int grgpio_irq_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| struct grgpio_priv *priv = d->host_data; |
| struct grgpio_lirq *lirq; |
| struct grgpio_uirq *uirq; |
| unsigned long flags; |
| int offset = hwirq; |
| int ret = 0; |
| |
| if (!priv) |
| return -EINVAL; |
| |
| lirq = &priv->lirqs[offset]; |
| if (lirq->index < 0) |
| return -EINVAL; |
| |
| dev_dbg(priv->dev, "Mapping irq %d for gpio line %d\n", |
| irq, offset); |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| /* Request underlying irq if not already requested */ |
| lirq->irq = irq; |
| uirq = &priv->uirqs[lirq->index]; |
| if (uirq->refcnt == 0) { |
| ret = request_irq(uirq->uirq, grgpio_irq_handler, 0, |
| dev_name(priv->dev), priv); |
| if (ret) { |
| dev_err(priv->dev, |
| "Could not request underlying irq %d\n", |
| uirq->uirq); |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| |
| return ret; |
| } |
| } |
| uirq->refcnt++; |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| |
| /* Setup irq */ |
| irq_set_chip_data(irq, priv); |
| irq_set_chip_and_handler(irq, &grgpio_irq_chip, |
| handle_simple_irq); |
| irq_set_noprobe(irq); |
| |
| return ret; |
| } |
| |
| static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq) |
| { |
| struct grgpio_priv *priv = d->host_data; |
| int index; |
| struct grgpio_lirq *lirq; |
| struct grgpio_uirq *uirq; |
| unsigned long flags; |
| int ngpio = priv->gc.ngpio; |
| int i; |
| |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| irq_set_chip_data(irq, NULL); |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| /* Free underlying irq if last user unmapped */ |
| index = -1; |
| for (i = 0; i < ngpio; i++) { |
| lirq = &priv->lirqs[i]; |
| if (lirq->irq == irq) { |
| grgpio_set_imask(priv, i, 0); |
| lirq->irq = 0; |
| index = lirq->index; |
| break; |
| } |
| } |
| WARN_ON(index < 0); |
| |
| if (index >= 0) { |
| uirq = &priv->uirqs[lirq->index]; |
| uirq->refcnt--; |
| if (uirq->refcnt == 0) |
| free_irq(uirq->uirq, priv); |
| } |
| |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| } |
| |
| static const struct irq_domain_ops grgpio_irq_domain_ops = { |
| .map = grgpio_irq_map, |
| .unmap = grgpio_irq_unmap, |
| }; |
| |
| /* ------------------------------------------------------------ */ |
| |
| static int grgpio_probe(struct platform_device *ofdev) |
| { |
| struct device_node *np = ofdev->dev.of_node; |
| void __iomem *regs; |
| struct gpio_chip *gc; |
| struct grgpio_priv *priv; |
| int err; |
| u32 prop; |
| s32 *irqmap; |
| int size; |
| int i; |
| |
| priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| regs = devm_platform_ioremap_resource(ofdev, 0); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| gc = &priv->gc; |
| err = bgpio_init(gc, &ofdev->dev, 4, regs + GRGPIO_DATA, |
| regs + GRGPIO_OUTPUT, NULL, regs + GRGPIO_DIR, NULL, |
| BGPIOF_BIG_ENDIAN_BYTE_ORDER); |
| if (err) { |
| dev_err(&ofdev->dev, "bgpio_init() failed\n"); |
| return err; |
| } |
| |
| priv->regs = regs; |
| priv->imask = gc->read_reg(regs + GRGPIO_IMASK); |
| priv->dev = &ofdev->dev; |
| |
| gc->of_node = np; |
| gc->owner = THIS_MODULE; |
| gc->to_irq = grgpio_to_irq; |
| gc->label = devm_kasprintf(&ofdev->dev, GFP_KERNEL, "%pOF", np); |
| gc->base = -1; |
| |
| err = of_property_read_u32(np, "nbits", &prop); |
| if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) { |
| gc->ngpio = GRGPIO_MAX_NGPIO; |
| dev_dbg(&ofdev->dev, |
| "No or invalid nbits property: assume %d\n", gc->ngpio); |
| } else { |
| gc->ngpio = prop; |
| } |
| |
| /* |
| * The irqmap contains the index values indicating which underlying irq, |
| * if anyone, is connected to that line |
| */ |
| irqmap = (s32 *)of_get_property(np, "irqmap", &size); |
| if (irqmap) { |
| if (size < gc->ngpio) { |
| dev_err(&ofdev->dev, |
| "irqmap shorter than ngpio (%d < %d)\n", |
| size, gc->ngpio); |
| return -EINVAL; |
| } |
| |
| priv->domain = irq_domain_add_linear(np, gc->ngpio, |
| &grgpio_irq_domain_ops, |
| priv); |
| if (!priv->domain) { |
| dev_err(&ofdev->dev, "Could not add irq domain\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < gc->ngpio; i++) { |
| struct grgpio_lirq *lirq; |
| int ret; |
| |
| lirq = &priv->lirqs[i]; |
| lirq->index = irqmap[i]; |
| |
| if (lirq->index < 0) |
| continue; |
| |
| ret = platform_get_irq(ofdev, lirq->index); |
| if (ret <= 0) { |
| /* |
| * Continue without irq functionality for that |
| * gpio line |
| */ |
| dev_err(priv->dev, |
| "Failed to get irq for offset %d\n", i); |
| continue; |
| } |
| priv->uirqs[lirq->index].uirq = ret; |
| } |
| } |
| |
| platform_set_drvdata(ofdev, priv); |
| |
| err = gpiochip_add_data(gc, priv); |
| if (err) { |
| dev_err(&ofdev->dev, "Could not add gpiochip\n"); |
| if (priv->domain) |
| irq_domain_remove(priv->domain); |
| return err; |
| } |
| |
| dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d, irqs=%s\n", |
| priv->regs, gc->base, gc->ngpio, priv->domain ? "on" : "off"); |
| |
| return 0; |
| } |
| |
| static int grgpio_remove(struct platform_device *ofdev) |
| { |
| struct grgpio_priv *priv = platform_get_drvdata(ofdev); |
| unsigned long flags; |
| int i; |
| int ret = 0; |
| |
| spin_lock_irqsave(&priv->gc.bgpio_lock, flags); |
| |
| if (priv->domain) { |
| for (i = 0; i < GRGPIO_MAX_NGPIO; i++) { |
| if (priv->uirqs[i].refcnt != 0) { |
| ret = -EBUSY; |
| goto out; |
| } |
| } |
| } |
| |
| gpiochip_remove(&priv->gc); |
| |
| if (priv->domain) |
| irq_domain_remove(priv->domain); |
| |
| out: |
| spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id grgpio_match[] = { |
| {.name = "GAISLER_GPIO"}, |
| {.name = "01_01a"}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, grgpio_match); |
| |
| static struct platform_driver grgpio_driver = { |
| .driver = { |
| .name = "grgpio", |
| .of_match_table = grgpio_match, |
| }, |
| .probe = grgpio_probe, |
| .remove = grgpio_remove, |
| }; |
| module_platform_driver(grgpio_driver); |
| |
| MODULE_AUTHOR("Aeroflex Gaisler AB."); |
| MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO"); |
| MODULE_LICENSE("GPL"); |