blob: 8be8c5f7ff626f01dc115de8ee592318564a8473 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015 MediaTek Inc.
* Author:
* Zhigang.Wei <zhigang.wei@mediatek.com>
* Chunfeng.Yun <chunfeng.yun@mediatek.com>
*/
#ifndef _XHCI_MTK_H_
#define _XHCI_MTK_H_
#include "xhci.h"
/**
* To simplify scheduler algorithm, set a upper limit for ESIT,
* if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
* round down to the limit value, that means allocating more
* bandwidth to it.
*/
#define XHCI_MTK_MAX_ESIT 64
/**
* @split_bit_map: used to avoid split microframes overlay
* @ep_list: Endpoints using this TT
* @usb_tt: usb TT related
* @tt_port: TT port number
*/
struct mu3h_sch_tt {
DECLARE_BITMAP(split_bit_map, XHCI_MTK_MAX_ESIT);
struct list_head ep_list;
struct usb_tt *usb_tt;
int tt_port;
};
/**
* struct mu3h_sch_bw_info: schedule information for bandwidth domain
*
* @bus_bw: array to keep track of bandwidth already used at each uframes
* @bw_ep_list: eps in the bandwidth domain
*
* treat a HS root port as a bandwidth domain, but treat a SS root port as
* two bandwidth domains, one for IN eps and another for OUT eps.
*/
struct mu3h_sch_bw_info {
u32 bus_bw[XHCI_MTK_MAX_ESIT];
struct list_head bw_ep_list;
};
/**
* struct mu3h_sch_ep_info: schedule information for endpoint
*
* @esit: unit is 125us, equal to 2 << Interval field in ep-context
* @num_budget_microframes: number of continuous uframes
* (@repeat==1) scheduled within the interval
* @bw_cost_per_microframe: bandwidth cost per microframe
* @endpoint: linked into bandwidth domain which it belongs to
* @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to
* @sch_tt: mu3h_sch_tt linked into
* @ep_type: endpoint type
* @maxpkt: max packet size of endpoint
* @ep: address of usb_host_endpoint struct
* @offset: which uframe of the interval that transfer should be
* scheduled first time within the interval
* @repeat: the time gap between two uframes that transfers are
* scheduled within a interval. in the simple algorithm, only
* assign 0 or 1 to it; 0 means using only one uframe in a
* interval, and 1 means using @num_budget_microframes
* continuous uframes
* @pkts: number of packets to be transferred in the scheduled uframes
* @cs_count: number of CS that host will trigger
* @burst_mode: burst mode for scheduling. 0: normal burst mode,
* distribute the bMaxBurst+1 packets for a single burst
* according to @pkts and @repeat, repeate the burst multiple
* times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets
* according to @pkts and @repeat. normal mode is used by
* default
* @bw_budget_table: table to record bandwidth budget per microframe
*/
struct mu3h_sch_ep_info {
u32 esit;
u32 num_budget_microframes;
u32 bw_cost_per_microframe;
struct list_head endpoint;
struct list_head tt_endpoint;
struct mu3h_sch_tt *sch_tt;
u32 ep_type;
u32 maxpkt;
void *ep;
/*
* mtk xHCI scheduling information put into reserved DWs
* in ep context
*/
u32 offset;
u32 repeat;
u32 pkts;
u32 cs_count;
u32 burst_mode;
u32 bw_budget_table[0];
};
#define MU3C_U3_PORT_MAX 4
#define MU3C_U2_PORT_MAX 5
/**
* struct mu3c_ippc_regs: MTK ssusb ip port control registers
* @ip_pw_ctr0~3: ip power and clock control registers
* @ip_pw_sts1~2: ip power and clock status registers
* @ip_xhci_cap: ip xHCI capability register
* @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used
* @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used
* @u2_phy_pll: usb2 phy pll control register
*/
struct mu3c_ippc_regs {
__le32 ip_pw_ctr0;
__le32 ip_pw_ctr1;
__le32 ip_pw_ctr2;
__le32 ip_pw_ctr3;
__le32 ip_pw_sts1;
__le32 ip_pw_sts2;
__le32 reserved0[3];
__le32 ip_xhci_cap;
__le32 reserved1[2];
__le64 u3_ctrl_p[MU3C_U3_PORT_MAX];
__le64 u2_ctrl_p[MU3C_U2_PORT_MAX];
__le32 reserved2;
__le32 u2_phy_pll;
__le32 reserved3[33]; /* 0x80 ~ 0xff */
};
struct xhci_hcd_mtk {
struct device *dev;
struct usb_hcd *hcd;
struct mu3h_sch_bw_info *sch_array;
struct mu3c_ippc_regs __iomem *ippc_regs;
bool has_ippc;
int num_u2_ports;
int num_u3_ports;
int u3p_dis_msk;
struct regulator *vusb33;
struct regulator *vbus;
struct clk *sys_clk; /* sys and mac clock */
struct clk *ref_clk;
struct clk *mcu_clk;
struct clk *dma_clk;
struct regmap *pericfg;
struct phy **phys;
int num_phys;
bool lpm_support;
/* usb remote wakeup */
bool uwk_en;
struct regmap *uwk;
u32 uwk_reg_base;
u32 uwk_vers;
};
static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
{
return dev_get_drvdata(hcd->self.controller);
}
#if IS_ENABLED(CONFIG_USB_XHCI_MTK)
int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk);
void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk);
int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep);
#else
static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd,
struct usb_device *udev, struct usb_host_endpoint *ep)
{
return 0;
}
static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd,
struct usb_device *udev, struct usb_host_endpoint *ep)
{
}
#endif
#endif /* _XHCI_MTK_H_ */