Documentation/netlink/genetlink-legacy.yaml

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://kernel.org/schemas/netlink/genetlink-legacy.yaml#
$schema: https://json-schema.org/draft-07/schema

# Common defines
$defs:
  uint:
    type: integer
    minimum: 0
  len-or-define:
    type: [ string, integer ]
    pattern: ^[0-9A-Za-z_]+( - 1)?$
    minimum: 0

# Schema for specs
title: Protocol
description: Specification of a genetlink protocol
type: object
required: [ name, doc, attribute-sets, operations ]
additionalProperties: False
properties:
  name:
    description: Name of the genetlink family.
    type: string
  doc:
    type: string
  version:
    description: Generic Netlink family version. Default is 1.
    type: integer
    minimum: 1
  protocol:
    description: Schema compatibility level. Default is "genetlink".
    enum: [ genetlink, genetlink-c, genetlink-legacy ] # Trim
  # Start genetlink-c
  uapi-header:
    description: Path to the uAPI header, default is linux/${family-name}.h
    type: string
  c-family-name:
    description: Name of the define for the family name.
    type: string
  c-version-name:
    description: Name of the define for the verion of the family.
    type: string
  max-by-define:
    description: Makes the number of attributes and commands be specified by a define, not an enum value.
    type: boolean
  # End genetlink-c
  # Start genetlink-legacy
  kernel-policy:
    description: |
      Defines if the input policy in the kernel is global, per-operation, or split per operation type.
      Default is split.
    enum: [ split, per-op, global ]
  # End genetlink-legacy

  definitions:
    description: List of type and constant definitions (enums, flags, defines).
    type: array
    items:
      type: object
      required: [ type, name ]
      additionalProperties: False
      properties:
        name:
          type: string
        header:
          description: For C-compatible languages, header which already defines this value.
          type: string
        type:
          enum: [ const, enum, flags, struct ] # Trim
        doc:
          type: string
        # For const
        value:
          description: For const - the value.
          type: [ string, integer ]
        # For enum and flags
        value-start:
          description: For enum or flags the literal initializer for the first value.
          type: [ string, integer ]
        entries:
          description: For enum or flags array of values.
          type: array
          items:
            oneOf:
              - type: string
              - type: object
                required: [ name ]
                additionalProperties: False
                properties:
                  name:
                    type: string
                  value:
                    type: integer
                  doc:
                    type: string
        render-max:
          description: Render the max members for this enum.
          type: boolean
        # Start genetlink-c
        enum-name:
          description: Name for enum, if empty no name will be used.
          type: [ string, "null" ]
        name-prefix:
          description: For enum the prefix of the values, optional.
          type: string
        # End genetlink-c
        # Start genetlink-legacy
        members:
          description: List of struct members. Only scalars and strings members allowed.
          type: array
          items:
            type: object
            required: [ name, type ]
            additionalProperties: False
            properties:
              name:
                type: string
              type:
                enum: [ u8, u16, u32, u64, s8, s16, s32, s64, string ]
              len:
                $ref: '#/$defs/len-or-define'
        # End genetlink-legacy

  attribute-sets:
    description: Definition of attribute spaces for this family.
    type: array
    items:
      description: Definition of a single attribute space.
      type: object
      required: [ name, attributes ]
      additionalProperties: False
      properties:
        name:
          description: |
            Name used when referring to this space in other definitions, not used outside of the spec.
          type: string
        name-prefix:
          description: |
            Prefix for the C enum name of the attributes. Default family[name]-set[name]-a-
          type: string
        enum-name:
          description: Name for the enum type of the attribute.
          type: string
        doc:
          description: Documentation of the space.
          type: string
        subset-of:
          description: |
            Name of another space which this is a logical part of. Sub-spaces can be used to define
            a limited group of attributes which are used in a nest.
          type: string
        # Start genetlink-c
        attr-cnt-name:
          description: The explicit name for constant holding the count of attributes (last attr + 1).
          type: string
        attr-max-name:
          description: The explicit name for last member of attribute enum.
          type: string
        # End genetlink-c
        attributes:
          description: List of attributes in the space.
          type: array
          items:
            type: object
            required: [ name, type ]
            additionalProperties: False
            properties:
              name:
                type: string
              type: &attr-type
                enum: [ unused, pad, flag, binary, u8, u16, u32, u64, s32, s64,
                        string, nest, array-nest, nest-type-value ]
              doc:
                description: Documentation of the attribute.
                type: string
              value:
                description: Value for the enum item representing this attribute in the uAPI.
                $ref: '#/$defs/uint'
              type-value:
                description: Name of the value extracted from the type of a nest-type-value attribute.
                type: array
                items:
                  type: string
              byte-order:
                enum: [ little-endian, big-endian ]
              multi-attr:
                type: boolean
              nested-attributes:
                description: Name of the space (sub-space) used inside the attribute.
                type: string
              enum:
                description: Name of the enum type used for the attribute.
                type: string
              enum-as-flags:
                description: |
                  Treat the enum as flags. In most cases enum is either used as flags or as values.
                  Sometimes, however, both forms are necessary, in which case header contains the enum
                  form while specific attributes may request to convert the values into a bitfield.
                type: boolean
              checks:
                description: Kernel input validation.
                type: object
                additionalProperties: False
                properties:
                  flags-mask:
                    description: Name of the flags constant on which to base mask (unsigned scalar types only).
                    type: string
                  min:
                    description: Min value for an integer attribute.
                    type: integer
                  min-len:
                    description: Min length for a binary attribute.
                    $ref: '#/$defs/len-or-define'
                  max-len:
                    description: Max length for a string or a binary attribute.
                    $ref: '#/$defs/len-or-define'
              sub-type: *attr-type

      # Make sure name-prefix does not appear in subsets (subsets inherit naming)
      dependencies:
        name-prefix:
          not:
            required: [ subset-of ]
        subset-of:
          not:
            required: [ name-prefix ]

  operations:
    description: Operations supported by the protocol.
    type: object
    required: [ list ]
    additionalProperties: False
    properties:
      enum-model:
        description: |
          The model of assigning values to the operations.
          "unified" is the recommended model where all message types belong
          to a single enum.
          "directional" has the messages sent to the kernel and from the kernel
          enumerated separately.
        enum: [ unified, directional ] # Trim
      name-prefix:
        description: |
          Prefix for the C enum name of the command. The name is formed by concatenating
          the prefix with the upper case name of the command, with dashes replaced by underscores.
        type: string
      enum-name:
        description: Name for the enum type with commands.
        type: string
      async-prefix:
        description: Same as name-prefix but used to render notifications and events to separate enum.
        type: string
      async-enum:
        description: Name for the enum type with notifications/events.
        type: string
      list:
        description: List of commands
        type: array
        items:
          type: object
          additionalProperties: False
          required: [ name, doc ]
          properties:
            name:
              description: Name of the operation, also defining its C enum value in uAPI.
              type: string
            doc:
              description: Documentation for the command.
              type: string
            value:
              description: Value for the enum in the uAPI.
              $ref: '#/$defs/uint'
            attribute-set:
              description: |
                Attribute space from which attributes directly in the requests and replies
                to this command are defined.
              type: string
            flags: &cmd_flags
              description: Command flags.
              type: array
              items:
                enum: [ admin-perm ]
            dont-validate:
              description: Kernel attribute validation flags.
              type: array
              items:
                enum: [ strict, dump ]
            do: &subop-type
              description: Main command handler.
              type: object
              additionalProperties: False
              properties:
                request: &subop-attr-list
                  description: Definition of the request message for a given command.
                  type: object
                  additionalProperties: False
                  properties:
                    attributes:
                      description: |
                        Names of attributes from the attribute-set (not full attribute
                        definitions, just names).
                      type: array
                      items:
                        type: string
                    # Start genetlink-legacy
                    value:
                      description: |
                        ID of this message if value for request and response differ,
                        i.e. requests and responses have different message enums.
                      $ref: '#/$defs/uint'
                    # End genetlink-legacy
                reply: *subop-attr-list
                pre:
                  description: Hook for a function to run before the main callback (pre_doit or start).
                  type: string
                post:
                  description: Hook for a function to run after the main callback (post_doit or done).
                  type: string
            dump: *subop-type
            notify:
              description: Name of the command sharing the reply type with this notification.
              type: string
            event:
              type: object
              additionalProperties: False
              properties:
                attributes:
                  description: Explicit list of the attributes for the notification.
                  type: array
                  items:
                    type: string
            mcgrp:
              description: Name of the multicast group generating given notification.
              type: string
  mcast-groups:
    description: List of multicast groups.
    type: object
    required: [ list ]
    additionalProperties: False
    properties:
      list:
        description: List of groups.
        type: array
        items:
          type: object
          required: [ name ]
          additionalProperties: False
          properties:
            name:
              description: |
                The name for the group, used to form the define and the value of the define.
              type: string
            # Start genetlink-c
            c-define-name:
              description: Override for the name of the define in C uAPI.
              type: string
            # End genetlink-c
            flags: *cmd_flags