blob: 493a1c954707764dc5cb11dcf11ee9a26d53a102 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx AXI/PLB softcore and window Watchdog Timer
maintainers:
- Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
- Srinivas Neeli <srinivas.neeli@xilinx.com>
description:
The Timebase watchdog timer(WDT) is a free-running 32 bit counter.
WDT uses a dual-expiration architecture. After one expiration of
the timeout interval, an interrupt is generated and the WDT state
bit is set to one in the status register. If the state bit is not
cleared (by writing a one to the state bit) before the next
expiration of the timeout interval, a WDT reset is generated.
allOf:
- $ref: watchdog.yaml#
properties:
compatible:
enum:
- xlnx,xps-timebase-wdt-1.01.a
- xlnx,xps-timebase-wdt-1.00.a
reg:
maxItems: 1
clocks:
maxItems: 1
clock-frequency:
description: Frequency of clock in Hz
xlnx,wdt-interval:
$ref: /schemas/types.yaml#/definitions/uint32
description: Watchdog timeout interval
minimum: 8
maximum: 32
xlnx,wdt-enable-once:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description: If watchdog is configured as enable once,
then the watchdog cannot be disabled after
it has been enabled.
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
watchdog@40100000 {
compatible = "xlnx,xps-timebase-wdt-1.00.a";
reg = <0x40100000 0x1000>;
clock-frequency = <50000000>;
clocks = <&clkc 15>;
xlnx,wdt-enable-once = <0x0>;
xlnx,wdt-interval = <0x1b>;
};
...