blob: fe9ae4c425c08ab2b534ba74d51a87ebc8b58cdb [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
maintainers:
- Balsam CHIHI <bchihi@baylibre.com>
description: |
LVTS is a thermal management architecture composed of three subsystems,
a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
a Converter - Low Voltage Thermal Sensor converter (LVTS), and
a Digital controller (LVTS_CTRL).
properties:
compatible:
enum:
- mediatek,mt8192-lvts-ap
- mediatek,mt8192-lvts-mcu
- mediatek,mt8195-lvts-ap
- mediatek,mt8195-lvts-mcu
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
description: LVTS reset for clearing temporary data on AP/MCU.
nvmem-cells:
minItems: 1
items:
- description: Calibration eFuse data 1 for LVTS
- description: Calibration eFuse data 2 for LVTS
nvmem-cell-names:
minItems: 1
items:
- const: lvts-calib-data-1
- const: lvts-calib-data-2
"#thermal-sensor-cells":
const: 1
allOf:
- $ref: thermal-sensor.yaml#
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt8192-lvts-ap
- mediatek,mt8192-lvts-mcu
then:
properties:
nvmem-cells:
maxItems: 1
nvmem-cell-names:
maxItems: 1
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt8195-lvts-ap
- mediatek,mt8195-lvts-mcu
then:
properties:
nvmem-cells:
minItems: 2
nvmem-cell-names:
minItems: 2
required:
- compatible
- reg
- interrupts
- clocks
- resets
- nvmem-cells
- nvmem-cell-names
- "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8195-clk.h>
#include <dt-bindings/reset/mt8195-resets.h>
#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
lvts_mcu: thermal-sensor@11278000 {
compatible = "mediatek,mt8195-lvts-mcu";
reg = <0 0x11278000 0 0x1000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
#thermal-sensor-cells = <1>;
};
};
thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay = <1000>;
polling-delay-passive = <250>;
thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
trips {
cpu0_alert: trip-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: trip-crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};