blob: eb0f9246818506bd75a7c19a27ef197afa6c4197 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020-21 Cadence
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence XSPI Controller
maintainers:
- Parshuram Thombare <pthombar@cadence.com>
description: |
The XSPI controller allows SPI protocol communication in
single, dual, quad or octal wire transmission modes for
read/write access to slaves such as SPI-NOR flash.
allOf:
- $ref: spi-controller.yaml#
properties:
compatible:
const: cdns,xspi-nor
reg:
items:
- description: address and length of the controller register set
- description: address and length of the Slave DMA data port
- description: address and length of the auxiliary registers
reg-names:
items:
- const: io
- const: sdma
- const: aux
interrupts:
maxItems: 1
required:
- compatible
- reg
- interrupts
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
xspi: spi@a0010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "cdns,xspi-nor";
reg = <0x0 0xa0010000 0x0 0x1040>,
<0x0 0xb0000000 0x0 0x1000>,
<0x0 0xa0020000 0x0 0x100>;
reg-names = "io", "sdma", "aux";
interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <75000000>;
reg = <0>;
};
flash@1 {
compatible = "jedec,spi-nor";
spi-max-frequency = <75000000>;
reg = <1>;
};
};
};