blob: 7ec8a6b6682c573e94281972775fba79e87832e6 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SMD Edge communication channel nodes
maintainers:
- Bjorn Andersson <bjorn.andersson@linaro.org>
description:
Qualcomm SMD subnode represents a remote subsystem or a remote processor of
some sort - or in SMD language an "edge". The name of the edges are not
important.
In turn, subnodes of the "edges" represent devices tied to SMD channels on
that "edge". The names of the devices are not important. The properties of
these nodes are defined by the individual bindings for the SMD devices.
See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
properties:
$nodename:
const: "smd-edge"
apr:
$ref: /schemas/soc/qcom/qcom,apr.yaml#
required:
- qcom,smd-channels
description:
Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
fastrpc:
$ref: /schemas/misc/qcom,fastrpc.yaml#
required:
- qcom,smd-channels
description:
Qualcomm FastRPC
interrupts:
maxItems: 1
label:
description:
Name of the edge, used for debugging and identification purposes. The
node name will be used if this is not present.
mboxes:
maxItems: 1
description:
Reference to the mailbox representing the outgoing doorbell in APCS for
this client.
qcom,ipc:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to a syscon node representing the APCS registers
- description: u32 representing offset to the register within the syscon
- description: u32 representing the ipc bit within the register
description:
Three entries specifying the outgoing ipc bit used for signaling the
remote processor.
qcom,smd-edge:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The identifier of the remote processor in the smd channel allocation
table.
qcom,remote-pid:
$ref: /schemas/types.yaml#/definitions/uint32
description:
The identifier for the remote processor as known by the rest of the
system.
rpm-requests:
$ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
required:
- qcom,smd-channels
description:
Qualcomm Resource Power Manager (RPM) over SMD.
wcnss:
$ref: /schemas/soc/qcom/qcom,wcnss.yaml
required:
- qcom,smd-channels
description:
Qualcomm WCNSS for Bluetooth, WiFi and FM radio.
required:
- interrupts
- qcom,smd-edge
oneOf:
- required:
- mboxes
- required:
- qcom,ipc
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
remoteproc {
// ...
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
};