blob: 2fd2178d1fa55923b879501b22f50c39f8c94f6e [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Core Power Reduction (CPR)
maintainers:
- Niklas Cassel <nks@flawful.org>
description: |
CPR (Core Power Reduction) is a technology to reduce core power on a CPU
or other device. Each OPP of a device corresponds to a "corner" that has
a range of valid voltages for a particular frequency. While the device is
running at a particular frequency, CPR monitors dynamic factors such as
temperature, etc. and suggests adjustments to the voltage to save power
and meet silicon characteristic requirements.
properties:
compatible:
items:
- enum:
- qcom,qcs404-cpr
- const: qcom,cpr
reg:
description: Base address and size of the RBCPR register region.
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: Reference clock.
clock-names:
items:
- const: ref
vdd-apc-supply:
description: APC regulator supply.
'#power-domain-cells':
const: 0
operating-points-v2:
description: |
A phandle to the OPP table containing the performance states
supported by the CPR power domain.
acc-syscon:
$ref: /schemas/types.yaml#/definitions/phandle
description: A phandle to the syscon used for writing ACC settings.
nvmem-cells:
items:
- description: Corner 1 quotient offset
- description: Corner 2 quotient offset
- description: Corner 3 quotient offset
- description: Corner 1 initial voltage
- description: Corner 2 initial voltage
- description: Corner 3 initial voltage
- description: Corner 1 quotient
- description: Corner 2 quotient
- description: Corner 3 quotient
- description: Corner 1 ring oscillator
- description: Corner 2 ring oscillator
- description: Corner 3 ring oscillator
- description: Fuse revision
nvmem-cell-names:
items:
- const: cpr_quotient_offset1
- const: cpr_quotient_offset2
- const: cpr_quotient_offset3
- const: cpr_init_voltage1
- const: cpr_init_voltage2
- const: cpr_init_voltage3
- const: cpr_quotient1
- const: cpr_quotient2
- const: cpr_quotient3
- const: cpr_ring_osc1
- const: cpr_ring_osc2
- const: cpr_ring_osc3
- const: cpr_fuse_revision
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- vdd-apc-supply
- '#power-domain-cells'
- operating-points-v2
- nvmem-cells
- nvmem-cell-names
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
cpr_opp_table: opp-table-cpr {
compatible = "operating-points-v2-qcom-level";
cpr_opp1: opp1 {
opp-level = <1>;
qcom,opp-fuse-level = <1>;
};
cpr_opp2: opp2 {
opp-level = <2>;
qcom,opp-fuse-level = <2>;
};
cpr_opp3: opp3 {
opp-level = <3>;
qcom,opp-fuse-level = <3>;
};
};
power-controller@b018000 {
compatible = "qcom,qcs404-cpr", "qcom,cpr";
reg = <0x0b018000 0x1000>;
interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
clocks = <&xo_board>;
clock-names = "ref";
vdd-apc-supply = <&pms405_s3>;
#power-domain-cells = <0>;
operating-points-v2 = <&cpr_opp_table>;
acc-syscon = <&tcsr>;
nvmem-cells = <&cpr_efuse_quot_offset1>,
<&cpr_efuse_quot_offset2>,
<&cpr_efuse_quot_offset3>,
<&cpr_efuse_init_voltage1>,
<&cpr_efuse_init_voltage2>,
<&cpr_efuse_init_voltage3>,
<&cpr_efuse_quot1>,
<&cpr_efuse_quot2>,
<&cpr_efuse_quot3>,
<&cpr_efuse_ring1>,
<&cpr_efuse_ring2>,
<&cpr_efuse_ring3>,
<&cpr_efuse_revision>;
nvmem-cell-names = "cpr_quotient_offset1",
"cpr_quotient_offset2",
"cpr_quotient_offset3",
"cpr_init_voltage1",
"cpr_init_voltage2",
"cpr_init_voltage3",
"cpr_quotient1",
"cpr_quotient2",
"cpr_quotient3",
"cpr_ring_osc1",
"cpr_ring_osc2",
"cpr_ring_osc3",
"cpr_fuse_revision";
};