blob: 20bc967a17b5ac411eee4df37a0cf70de84f4f6c [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm QCS404 TLMM pin controller
maintainers:
- Bjorn Andersson <andersson@kernel.org>
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
description:
Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC.
properties:
compatible:
const: qcom,qcs404-pinctrl
reg:
maxItems: 3
reg-names:
items:
- const: south
- const: north
- const: east
interrupts:
maxItems: 1
interrupt-controller: true
"#interrupt-cells": true
gpio-controller: true
"#gpio-cells": true
gpio-ranges: true
wakeup-parent: true
gpio-reserved-ranges:
minItems: 1
maxItems: 60
gpio-line-names:
maxItems: 120
patternProperties:
"-state$":
oneOf:
- $ref: "#/$defs/qcom-qcs404-tlmm-state"
- patternProperties:
"-pins$":
$ref: "#/$defs/qcom-qcs404-tlmm-state"
additionalProperties: false
$defs:
qcom-qcs404-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
oneOf:
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$"
- enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
sdc2_cmd, sdc2_data, ufs_reset ]
minItems: 1
maxItems: 36
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1,
atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0,
bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4,
blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2,
blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4,
blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1,
blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1,
blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1,
blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2,
blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng,
cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a,
ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a,
ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest,
gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1,
hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6,
hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx,
i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a,
i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a,
i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a,
i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1,
mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist,
prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12,
pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17,
pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21,
pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5,
pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0,
qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0,
rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5,
rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2,
rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6,
rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1,
rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc,
rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write,
spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
wlan2_adc0, wlan2_adc1, wsa_en ]
bias-pull-down: true
bias-pull-up: true
bias-disable: true
drive-strength: true
input-enable: true
output-high: true
output-low: true
required:
- pins
additionalProperties: false
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@1000000 {
compatible = "qcom,qcs404-pinctrl";
reg = <0x01000000 0x200000>,
<0x01300000 0x200000>,
<0x07b00000 0x200000>;
reg-names = "south", "north", "east";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&tlmm 0 0 120>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1-i2c1-default-state {
pins = "gpio24", "gpio25";
function = "blsp_i2c1";
};
blsp1-i2c2-default-state {
sda-pins {
pins = "gpio19";
function = "blsp_i2c_sda_a2";
};
scl-pins {
pins = "gpio20";
function = "blsp_i2c_scl_a2";
};
};
};