blob: c3a368a0fe93566c46f5320a101045a352ae0c25 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Actions Semi ATC260x Power Management IC
maintainers:
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
description: |
ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
and GPIO controller blocks. Currently only the PM related functionalities
(i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
chip variants are supported.
ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
regulators and 1 fixed LDO regulator.
ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
regulators.
allOf:
- $ref: ../input/input.yaml
properties:
compatible:
enum:
- actions,atc2603c
- actions,atc2609a
reg:
maxItems: 1
interrupts:
maxItems: 1
reset-time-sec:
description: |
Duration in seconds which the key should be kept pressed for device
to reset automatically. The hardware default is 8. Use 0 to disable
this functionality.
enum: [0, 6, 8, 10, 12]
regulators:
type: object
description: |
List of child nodes specifying the regulators, depending on chip variant:
* ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
* ATC2609A: dcdc[0-4], ldo[0-9]
properties:
compatible:
enum:
- actions,atc2603c-regulator
- actions,atc2609a-regulator
switchldo1:
type: object
$ref: ../regulator/regulator.yaml
properties:
regulator-name: true
regulator-boot-on: true
regulator-always-on: true
regulator-min-microvolt: true
regulator-max-microvolt: true
regulator-allow-bypass: true
regulator-active-discharge: true
additionalProperties: false
patternProperties:
"^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
description: ATC260x voltage regulators supplies
"^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
type: object
$ref: ../regulator/regulator.yaml
properties:
regulator-name: true
regulator-boot-on: true
regulator-always-on: true
regulator-min-microvolt: true
regulator-max-microvolt: true
regulator-allow-bypass: true
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
const: actions,atc2603c-regulator
then:
patternProperties:
"^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
"^(ldo|dcdc)":
properties:
regulator-allow-bypass: false
- if:
properties:
compatible:
contains:
const: actions,atc2609a-regulator
then:
patternProperties:
"^(ldo1[1-2]|switchldo1)(-supply)?$": false
"^(dcdc|ldo[3-9])":
properties:
regulator-allow-bypass: false
required:
- compatible
additionalProperties: false
additionalProperties: false
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
pmic@65 {
compatible = "actions,atc2603c";
reg = <0x65>;
interrupt-parent = <&sirq>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
reset-time-sec = <6>;
regulators {
compatible = "actions,atc2603c-regulator";
dcdc1-supply = <&reg_5v0>;
dcdc3-supply = <&reg_5v0>;
ldo5-supply = <&reg_5v0>;
switchldo1-supply = <&vcc>;
vdd_cpu: dcdc1 {
regulator-name = "VDD_CPU";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
};
vcc: dcdc3 {
regulator-name = "VCC";
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc_3v1: ldo5 {
regulator-name = "VCC_3V1";
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <3300000>;
};
sd_vcc: switchldo1 {
regulator-name = "SD_VCC";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
...