blob: e76ba767dfd2200accb6a43e5c7529d7aafc9ccc [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
description: |
The FMC2 functional block makes the interface with: synchronous and
asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
peripherals) and NAND flash memories.
Its main purposes are:
- to translate AXI transactions into the appropriate external device
protocol
- to meet the access time requirements of the external devices
All external devices share the addresses, data and control signals with the
controller. Each external device is accessed by means of a unique Chip
Select. The FMC2 performs only one access at a time to an external device.
maintainers:
- Christophe Kerello <christophe.kerello@foss.st.com>
properties:
compatible:
const: st,stm32mp1-fmc2-ebi
reg:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
"#address-cells":
const: 2
"#size-cells":
const: 1
ranges:
description: |
Reflects the memory layout with four integer values per bank. Format:
<bank-number> 0 <address of the bank> <size>
patternProperties:
"^.*@[0-4],[a-f0-9]+$":
type: object
$ref: mc-peripheral-props.yaml#
required:
- "#address-cells"
- "#size-cells"
- compatible
- reg
- clocks
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
memory-controller@58002000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "st,stm32mp1-fmc2-ebi";
reg = <0x58002000 0x1000>;
clocks = <&rcc FMC_K>;
resets = <&rcc FMC_R>;
ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
<1 0 0x64000000 0x04000000>, /* EBI CS 2 */
<2 0 0x68000000 0x04000000>, /* EBI CS 3 */
<3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
<4 0 0x80000000 0x10000000>; /* NAND */
psram@0,0 {
compatible = "mtd-ram";
reg = <0 0x00000000 0x100000>;
bank-width = <2>;
st,fmc2-ebi-cs-transaction-type = <1>;
st,fmc2-ebi-cs-address-setup-ns = <60>;
st,fmc2-ebi-cs-data-setup-ns = <30>;
st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
};
nand-controller@4,0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "st,stm32mp1-fmc2-nfc";
reg = <4 0x00000000 0x1000>,
<4 0x08010000 0x1000>,
<4 0x08020000 0x1000>,
<4 0x01000000 0x1000>,
<4 0x09010000 0x1000>,
<4 0x09020000 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
<&mdma1 20 0x2 0x12000a08 0x0 0x0>,
<&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
dma-names = "tx", "rx", "ecc";
nand@0 {
reg = <0>;
nand-on-flash-bbt;
#address-cells = <1>;
#size-cells = <1>;
};
};
};
...