blob: 54e15ab8a7f545a298536e53c446cb0d6f92a202 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 MIPI CSI-2
maintainers:
- Paul Kocialkowski <paul.kocialkowski@bootlin.com>
properties:
compatible:
oneOf:
- const: allwinner,sun6i-a31-mipi-csi2
- items:
- const: allwinner,sun8i-v3s-mipi-csi2
- const: allwinner,sun6i-a31-mipi-csi2
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: Bus Clock
- description: Module Clock
clock-names:
items:
- const: bus
- const: mod
phys:
maxItems: 1
description: MIPI D-PHY
phy-names:
items:
- const: dphy
resets:
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
description: Input port, connect to a MIPI CSI-2 sensor
properties:
reg:
const: 0
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
minItems: 1
maxItems: 4
required:
- data-lanes
unevaluatedProperties: false
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: Output port, connect to a CSI controller
required:
- port@0
- port@1
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- phys
- phy-names
- resets
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/reset/sun8i-v3s-ccu.h>
mipi_csi2: csi@1cb1000 {
compatible = "allwinner,sun8i-v3s-mipi-csi2",
"allwinner,sun6i-a31-mipi-csi2";
reg = <0x01cb1000 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CSI>,
<&ccu CLK_CSI1_SCLK>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_CSI>;
phys = <&dphy>;
phy-names = "dphy";
ports {
#address-cells = <1>;
#size-cells = <0>;
mipi_csi2_in: port@0 {
reg = <0>;
mipi_csi2_in_ov5648: endpoint {
data-lanes = <1 2 3 4>;
remote-endpoint = <&ov5648_out_mipi_csi2>;
};
};
mipi_csi2_out: port@1 {
reg = <1>;
mipi_csi2_out_csi0: endpoint {
remote-endpoint = <&csi0_in_mipi_csi2>;
};
};
};
};
...