blob: 2899d26d690e623d196bc8241547e91faff11de9 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/allegro,al5e.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allegro DVT Video IP Codecs
maintainers:
- Michael Tretter <m.tretter@pengutronix.de>
description: |-
Allegro DVT video IP codecs present in the Xilinx ZynqMP SoC. The IP core may
either be a H.264/H.265 encoder or H.264/H.265 decoder ip core.
Each actual codec engine is controlled by a microcontroller (MCU). Host
software uses a provided mailbox interface to communicate with the MCU. The
MCUs share an interrupt.
properties:
compatible:
oneOf:
- items:
- const: allegro,al5e-1.1
- const: allegro,al5e
- items:
- const: allegro,al5d-1.1
- const: allegro,al5d
reg:
items:
- description: The registers
- description: The SRAM
reg-names:
items:
- const: regs
- const: sram
interrupts:
maxItems: 1
clocks:
items:
- description: Core clock
- description: MCU clock
- description: Core AXI master port clock
- description: MCU AXI master port clock
- description: AXI4-Lite slave port clock
clock-names:
items:
- const: core_clk
- const: mcu_clk
- const: m_axi_core_aclk
- const: m_axi_mcu_aclk
- const: s_axi_lite_aclk
required:
- compatible
- reg
- reg-names
- interrupts
- clocks
- clock-names
additionalProperties: False
examples:
- |
fpga {
#address-cells = <2>;
#size-cells = <2>;
al5e: video-codec@a0009000 {
compatible = "allegro,al5e-1.1", "allegro,al5e";
reg = <0 0xa0009000 0 0x1000>,
<0 0xa0000000 0 0x8000>;
reg-names = "regs", "sram";
interrupts = <0 96 4>;
clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
<&clkc 71>, <&clkc 71>, <&clkc 71>;
clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
"m_axi_mcu_aclk", "s_axi_lite_aclk";
};
};
- |
fpga {
#address-cells = <2>;
#size-cells = <2>;
al5d: video-codec@a0029000 {
compatible = "allegro,al5d-1.1", "allegro,al5d";
reg = <0 0xa0029000 0 0x1000>,
<0 0xa0020000 0 0x8000>;
reg-names = "regs", "sram";
interrupts = <0 96 4>;
clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
<&clkc 71>, <&clkc 71>, <&clkc 71>;
clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
"m_axi_mcu_aclk", "s_axi_lite_aclk";
};
};
...