blob: 1151518859bd0a8ff8b032c0708141747a4869c6 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K3 Interrupt Aggregator
maintainers:
- Lokesh Vutla <lokeshvutla@ti.com>
allOf:
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
description: |
The Interrupt Aggregator (INTA) provides a centralized machine
which handles the termination of system events to that they can
be coherently processed by the host(s) in the system. A maximum
of 64 events can be mapped to a single interrupt.
Interrupt Aggregator
+-----------------------------------------+
| Intmap VINT |
| +--------------+ +------------+ |
m ------>| | vint | bit | | 0 |.....|63| vint0 |
. | +--------------+ +------------+ | +------+
. | . . | | HOST |
Globalevents ------>| . . |----->| IRQ |
. | . . | | CTRL |
. | . . | +------+
n ------>| +--------------+ +------------+ |
| | vint | bit | | 0 |.....|63| vintx |
| +--------------+ +------------+ |
| |
| Unmap |
| +--------------+ |
Unmapped events ---->| | umapidx |-------------------------> Globalevents
| +--------------+ |
| |
+-----------------------------------------+
Configuration of these Intmap registers that maps global events to vint is
done by a system controller (like the Device Memory and Security Controller
on AM654 SoC). Driver should request the system controller to get the range
of global events and vints assigned to the requesting host. Management
of these requested resources should be handled by driver and requests
system controller to map specific global event to vint, bit pair.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol).
properties:
compatible:
const: ti,sci-inta
reg:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 0
msi-controller: true
ti,interrupt-ranges:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Interrupt ranges that converts the INTA output hw irq numbers
to parents's input interrupt numbers.
items:
items:
- description: |
"output_irq" specifies the base for inta output irq
- description: |
"parent's input irq" specifies the base for parent irq
- description: |
"limit" specifies the limit for translation
ti,unmapped-event-sources:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description:
Array of phandles to DMA controllers where the unmapped events originate.
required:
- compatible
- reg
- interrupt-controller
- msi-controller
- ti,sci
- ti,sci-dev-id
- ti,interrupt-ranges
unevaluatedProperties: false
examples:
- |
bus {
#address-cells = <2>;
#size-cells = <2>;
main_udmass_inta: msi-controller@33d00000 {
compatible = "ti,sci-inta";
reg = <0x0 0x33d00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
interrupt-parent = <&main_navss_intr>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,interrupt-ranges = <0 0 256>;
};
};