blob: 159cd9d9fe573c7315cc5066409dae6c8c478e94 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GPIO attached keys
maintainers:
- Rob Herring <robh@kernel.org>
properties:
compatible:
enum:
- gpio-keys
- gpio-keys-polled
autorepeat: true
label:
description: Name of entire device
poll-interval: true
patternProperties:
"^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
$ref: input.yaml#
properties:
gpios:
maxItems: 1
interrupts:
maxItems: 1
label:
description: Descriptive name of the key.
linux,code:
description: Key / Axis code to emit.
linux,input-type:
default: 1 # EV_KEY
linux,input-value:
description: |
If linux,input-type is EV_ABS or EV_REL then this
value is sent for events this button generates when pressed.
EV_ABS/EV_REL axis will generate an event with a value of 0
when all buttons with linux,input-type == type and
linux,code == axis are released. This value is interpreted
as a signed 32 bit value, e.g. to make a button generate a
value of -1 use:
linux,input-value = <0xffffffff>; /* -1 */
$ref: /schemas/types.yaml#/definitions/uint32
debounce-interval:
description:
Debouncing interval time in milliseconds. If not specified defaults to 5.
$ref: /schemas/types.yaml#/definitions/uint32
default: 5
wakeup-source:
description: Button can wake-up the system.
wakeup-event-action:
description: |
Specifies whether the key should wake the system when asserted, when
deasserted, or both. This property is only valid for keys that wake up the
system (e.g., when the "wakeup-source" property is also provided).
Supported values are defined in linux-event-codes.h:
EV_ACT_ANY - both asserted and deasserted
EV_ACT_ASSERTED - asserted
EV_ACT_DEASSERTED - deasserted
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
linux,can-disable:
description:
Indicates that button is connected to dedicated (not shared) interrupt
which can be disabled to suppress events from the button.
type: boolean
required:
- linux,code
anyOf:
- required:
- interrupts
- required:
- interrupts-extended
- required:
- gpios
dependencies:
wakeup-event-action: [ wakeup-source ]
linux,input-value: [ gpios ]
unevaluatedProperties: false
allOf:
- $ref: input.yaml#
- if:
properties:
compatible:
const: gpio-keys-polled
then:
required:
- poll-interval
else:
properties:
poll-interval: false
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
gpio-keys {
compatible = "gpio-keys";
autorepeat;
key-up {
label = "GPIO Key UP";
linux,code = <103>;
gpios = <&gpio1 0 1>;
};
key-down {
label = "GPIO Key DOWN";
linux,code = <108>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
};
...