blob: f11391ab4b622d6ff380860ad0ff239e82771248 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ADRF6780 Microwave Upconverter
maintainers:
- Antoniu Miclaus <antoniu.miclaus@analog.com>
description: |
Wideband, microwave upconverter optimized for point to point microwave
radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
https://www.analog.com/en/products/adrf6780.html
properties:
compatible:
enum:
- adi,adrf6780
reg:
maxItems: 1
spi-max-frequency:
maximum: 1000000
clocks:
description:
Definition of the external clock.
minItems: 1
clock-names:
items:
- const: lo_in
clock-output-names:
maxItems: 1
adi,vga-buff-en:
description:
RF Variable Gain Amplifier Buffer Enable. Gain is controlled by
the voltage on the VATT pin.
type: boolean
adi,lo-buff-en:
description:
Local Oscillator Amplifier Enable. Disable to put the part in
a power down state.
type: boolean
adi,if-mode-en:
description:
Intermediate Frequency Mode Enable. Either IF Mode or I/Q Mode
can be enabled at a time.
type: boolean
adi,iq-mode-en:
description:
I/Q Mode Enable. Either IF Mode or I/Q Mode can be enabled at a
time.
type: boolean
adi,lo-x2-en:
description:
Double the Local Oscillator output frequency from the Local
Oscillator Input Frequency. Either LOx1 or LOx2 can be enabled
at a time.
type: boolean
adi,lo-ppf-en:
description:
Local Oscillator input frequency equal to the Local Oscillator
output frequency (LO x1). Either LOx1 or LOx2 can be enabled
at a time.
type: boolean
adi,lo-en:
description:
Enable additional cirtuitry in the LO chain. Disable to put the
part in a power down state.
type: boolean
adi,uc-bias-en:
description:
Enable all bias circuitry thourghout the entire part.
Disable to put the part in a power down state.
type: boolean
adi,lo-sideband:
description:
Switch to the Lower LO Sideband. By default the Upper LO
sideband is enabled.
type: boolean
adi,vdet-out-en:
description:
VDET Output Select Enable. Expose the RF detector output to the
VDET external pin.
type: boolean
'#clock-cells':
const: 0
dependencies:
adi,lo-x2-en: [ "adi,lo-en" ]
adi,lo-ppf-en: [ "adi,lo-en" ]
required:
- compatible
- reg
- clocks
- clock-names
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
adrf6780@0 {
compatible = "adi,adrf6780";
reg = <0>;
spi-max-frequency = <1000000>;
clocks = <&adrf6780_lo>;
clock-names = "lo_in";
};
};
...