| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: NewVision NV3051D based LCD panel |
| |
| description: | |
| The NewVision NV3051D is a driver chip used to drive DSI panels. For now, |
| this driver only supports the 640x480 panels found in the Anbernic RG353 |
| based devices. |
| |
| maintainers: |
| - Chris Morgan <macromorgan@hotmail.com> |
| |
| allOf: |
| - $ref: panel-common.yaml# |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - anbernic,rg353p-panel |
| - anbernic,rg353v-panel |
| - const: newvision,nv3051d |
| |
| reg: true |
| backlight: true |
| port: true |
| reset-gpios: |
| description: Active low reset GPIO |
| vdd-supply: true |
| |
| required: |
| - compatible |
| - reg |
| - backlight |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| panel@0 { |
| compatible = "anbernic,rg353p-panel", "newvision,nv3051d"; |
| reg = <0>; |
| backlight = <&backlight>; |
| reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; |
| vdd-supply = <&vcc3v3_lcd>; |
| |
| port { |
| mipi_in_panel: endpoint { |
| remote-endpoint = <&mipi_out_panel>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
