blob: 3e7d7c4bafdc2dcaa1ad0435255ba1628db42d2e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/drivers/acorn/net/ether1.c
*
* Copyright (C) 1996-2000 Russell King
*
* Acorn ether1 driver (82586 chip) for Acorn machines
*
* We basically keep two queues in the cards memory - one for transmit
* and one for receive. Each has a head and a tail. The head is where
* we/the chip adds packets to be transmitted/received, and the tail
* is where the transmitter has got to/where the receiver will stop.
* Both of these queues are circular, and since the chip is running
* all the time, we have to be careful when we modify the pointers etc
* so that the buffer memory contents is valid all the time.
*
* Change log:
* 1.00 RMK Released
* 1.01 RMK 19/03/1996 Transfers the last odd byte onto/off of the card now.
* 1.02 RMK 25/05/1997 Added code to restart RU if it goes not ready
* 1.03 RMK 14/09/1997 Cleaned up the handling of a reset during the TX interrupt.
* Should prevent lockup.
* 1.04 RMK 17/09/1997 Added more info when initialisation of chip goes wrong.
* TDR now only reports failure when chip reports non-zero
* TDR time-distance.
* 1.05 RMK 31/12/1997 Removed calls to dev_tint for 2.1
* 1.06 RMK 10/02/2000 Updated for 2.3.43
* 1.07 RMK 13/05/2000 Updated for 2.3.99-pre8
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#define __ETHER1_C
#include "ether1.h"
static unsigned int net_debug = NET_DEBUG;
#define BUFFER_SIZE 0x10000
#define TX_AREA_START 0x00100
#define TX_AREA_END 0x05000
#define RX_AREA_START 0x05000
#define RX_AREA_END 0x0fc00
static int ether1_open(struct net_device *dev);
static netdev_tx_t ether1_sendpacket(struct sk_buff *skb,
struct net_device *dev);
static irqreturn_t ether1_interrupt(int irq, void *dev_id);
static int ether1_close(struct net_device *dev);
static void ether1_setmulticastlist(struct net_device *dev);
static void ether1_timeout(struct net_device *dev, unsigned int txqueue);
/* ------------------------------------------------------------------------- */
static char version[] = "ether1 ethernet driver (c) 2000 Russell King v1.07\n";
#define BUS_16 16
#define BUS_8 8
/* ------------------------------------------------------------------------- */
#define DISABLEIRQS 1
#define NORMALIRQS 0
#define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs)
#define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs)
static inline unsigned short
ether1_inw_p (struct net_device *dev, int addr, int svflgs)
{
unsigned long flags;
unsigned short ret;
if (svflgs)
local_irq_save (flags);
writeb(addr >> 12, REG_PAGE);
ret = readw(ETHER1_RAM + ((addr & 4095) << 1));
if (svflgs)
local_irq_restore (flags);
return ret;
}
static inline void
ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs)
{
unsigned long flags;
if (svflgs)
local_irq_save (flags);
writeb(addr >> 12, REG_PAGE);
writew(val, ETHER1_RAM + ((addr & 4095) << 1));
if (svflgs)
local_irq_restore (flags);
}
/*
* Some inline assembler to allow fast transfers on to/off of the card.
* Since this driver depends on some features presented by the ARM
* specific architecture, and that you can't configure this driver
* without specifying ARM mode, this is not a problem.
*
* This routine is essentially an optimised memcpy from the card's
* onboard RAM to kernel memory.
*/
static void
ether1_writebuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length)
{
unsigned int page, thislen, offset;
void __iomem *addr;
offset = start & 4095;
page = start >> 12;
addr = ETHER1_RAM + (offset << 1);
if (offset + length > 4096)
thislen = 4096 - offset;
else
thislen = length;
do {
int used;
writeb(page, REG_PAGE);
length -= thislen;
__asm__ __volatile__(
"subs %3, %3, #2\n\
bmi 2f\n\
1: ldr %0, [%1], #2\n\
mov %0, %0, lsl #16\n\
orr %0, %0, %0, lsr #16\n\
str %0, [%2], #4\n\
subs %3, %3, #2\n\
bmi 2f\n\
ldr %0, [%1], #2\n\
mov %0, %0, lsl #16\n\
orr %0, %0, %0, lsr #16\n\
str %0, [%2], #4\n\
subs %3, %3, #2\n\
bmi 2f\n\
ldr %0, [%1], #2\n\
mov %0, %0, lsl #16\n\
orr %0, %0, %0, lsr #16\n\
str %0, [%2], #4\n\
subs %3, %3, #2\n\
bmi 2f\n\
ldr %0, [%1], #2\n\
mov %0, %0, lsl #16\n\
orr %0, %0, %0, lsr #16\n\
str %0, [%2], #4\n\
subs %3, %3, #2\n\
bpl 1b\n\
2: adds %3, %3, #1\n\
ldreqb %0, [%1]\n\
streqb %0, [%2]"
: "=&r" (used), "=&r" (data)
: "r" (addr), "r" (thislen), "1" (data));
addr = ETHER1_RAM;
thislen = length;
if (thislen > 4096)
thislen = 4096;
page++;
} while (thislen);
}
static void
ether1_readbuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length)
{
unsigned int page, thislen, offset;
void __iomem *addr;
offset = start & 4095;
page = start >> 12;
addr = ETHER1_RAM + (offset << 1);
if (offset + length > 4096)
thislen = 4096 - offset;
else
thislen = length;
do {
int used;
writeb(page, REG_PAGE);
length -= thislen;
__asm__ __volatile__(
"subs %3, %3, #2\n\
bmi 2f\n\
1: ldr %0, [%2], #4\n\
strb %0, [%1], #1\n\
mov %0, %0, lsr #8\n\
strb %0, [%1], #1\n\
subs %3, %3, #2\n\
bmi 2f\n\
ldr %0, [%2], #4\n\
strb %0, [%1], #1\n\
mov %0, %0, lsr #8\n\
strb %0, [%1], #1\n\
subs %3, %3, #2\n\
bmi 2f\n\
ldr %0, [%2], #4\n\
strb %0, [%1], #1\n\
mov %0, %0, lsr #8\n\
strb %0, [%1], #1\n\
subs %3, %3, #2\n\
bmi 2f\n\
ldr %0, [%2], #4\n\
strb %0, [%1], #1\n\
mov %0, %0, lsr #8\n\
strb %0, [%1], #1\n\
subs %3, %3, #2\n\
bpl 1b\n\
2: adds %3, %3, #1\n\
ldreqb %0, [%2]\n\
streqb %0, [%1]"
: "=&r" (used), "=&r" (data)
: "r" (addr), "r" (thislen), "1" (data));
addr = ETHER1_RAM;
thislen = length;
if (thislen > 4096)
thislen = 4096;
page++;
} while (thislen);
}
static int
ether1_ramtest(struct net_device *dev, unsigned char byte)
{
unsigned char *buffer = kmalloc (BUFFER_SIZE, GFP_KERNEL);
int i, ret = BUFFER_SIZE;
int max_errors = 15;
int bad = -1;
int bad_start = 0;
if (!buffer)
return 1;
memset (buffer, byte, BUFFER_SIZE);
ether1_writebuffer (dev, buffer, 0, BUFFER_SIZE);
memset (buffer, byte ^ 0xff, BUFFER_SIZE);
ether1_readbuffer (dev, buffer, 0, BUFFER_SIZE);
for (i = 0; i < BUFFER_SIZE; i++) {
if (buffer[i] != byte) {
if (max_errors >= 0 && bad != buffer[i]) {
if (bad != -1)
printk ("\n");
printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X",
dev->name, buffer[i], byte, i);
ret = -ENODEV;
max_errors --;
bad = buffer[i];
bad_start = i;
}
} else {
if (bad != -1) {
if (bad_start == i - 1)
printk ("\n");
else
printk (" - 0x%04X\n", i - 1);
bad = -1;
}
}
}
if (bad != -1)
printk (" - 0x%04X\n", BUFFER_SIZE);
kfree (buffer);
return ret;
}
static int
ether1_reset (struct net_device *dev)
{
writeb(CTRL_RST|CTRL_ACK, REG_CONTROL);
return BUS_16;
}
static int
ether1_init_2(struct net_device *dev)
{
int i;
dev->mem_start = 0;
i = ether1_ramtest (dev, 0x5a);
if (i > 0)
i = ether1_ramtest (dev, 0x1e);
if (i <= 0)
return -ENODEV;
dev->mem_end = i;
return 0;
}
/*
* These are the structures that are loaded into the ether RAM card to
* initialise the 82586
*/
/* at 0x0100 */
#define NOP_ADDR (TX_AREA_START)
#define NOP_SIZE (0x06)
static nop_t init_nop = {
0,
CMD_NOP,
NOP_ADDR
};
/* at 0x003a */
#define TDR_ADDR (0x003a)
#define TDR_SIZE (0x08)
static tdr_t init_tdr = {
0,
CMD_TDR | CMD_INTR,
NOP_ADDR,
0
};
/* at 0x002e */
#define MC_ADDR (0x002e)
#define MC_SIZE (0x0c)
static mc_t init_mc = {
0,
CMD_SETMULTICAST,
TDR_ADDR,
0,
{ { 0, } }
};
/* at 0x0022 */
#define SA_ADDR (0x0022)
#define SA_SIZE (0x0c)
static sa_t init_sa = {
0,
CMD_SETADDRESS,
MC_ADDR,
{ 0, }
};
/* at 0x0010 */
#define CFG_ADDR (0x0010)
#define CFG_SIZE (0x12)
static cfg_t init_cfg = {
0,
CMD_CONFIG,
SA_ADDR,
8,
8,
CFG8_SRDY,
CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6),
0,
0x60,
0,
CFG13_RETRY(15) | CFG13_SLOTH(2),
0,
};
/* at 0x0000 */
#define SCB_ADDR (0x0000)
#define SCB_SIZE (0x10)
static scb_t init_scb = {
0,
SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX,
CFG_ADDR,
RX_AREA_START,
0,
0,
0,
0
};
/* at 0xffee */
#define ISCP_ADDR (0xffee)
#define ISCP_SIZE (0x08)
static iscp_t init_iscp = {
1,
SCB_ADDR,
0x0000,
0x0000
};
/* at 0xfff6 */
#define SCP_ADDR (0xfff6)
#define SCP_SIZE (0x0a)
static scp_t init_scp = {
SCP_SY_16BBUS,
{ 0, 0 },
ISCP_ADDR,
0
};
#define RFD_SIZE (0x16)
static rfd_t init_rfd = {
0,
0,
0,
0,
{ 0, },
{ 0, },
0
};
#define RBD_SIZE (0x0a)
static rbd_t init_rbd = {
0,
0,
0,
0,
ETH_FRAME_LEN + 8
};
#define TX_SIZE (0x08)
#define TBD_SIZE (0x08)
static int
ether1_init_for_open (struct net_device *dev)
{
int i, status, addr, next, next2;
int failures = 0;
unsigned long timeout;
writeb(CTRL_RST|CTRL_ACK, REG_CONTROL);
for (i = 0; i < 6; i++)
init_sa.sa_addr[i] = dev->dev_addr[i];
/* load data structures into ether1 RAM */
ether1_writebuffer (dev, &init_scp, SCP_ADDR, SCP_SIZE);
ether1_writebuffer (dev, &init_iscp, ISCP_ADDR, ISCP_SIZE);
ether1_writebuffer (dev, &init_scb, SCB_ADDR, SCB_SIZE);
ether1_writebuffer (dev, &init_cfg, CFG_ADDR, CFG_SIZE);
ether1_writebuffer (dev, &init_sa, SA_ADDR, SA_SIZE);
ether1_writebuffer (dev, &init_mc, MC_ADDR, MC_SIZE);
ether1_writebuffer (dev, &init_tdr, TDR_ADDR, TDR_SIZE);
ether1_writebuffer (dev, &init_nop, NOP_ADDR, NOP_SIZE);
if (ether1_readw(dev, CFG_ADDR, cfg_t, cfg_command, NORMALIRQS) != CMD_CONFIG) {
printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n",
dev->name);
return 1;
}
/*
* setup circularly linked list of { rfd, rbd, buffer }, with
* all rfds circularly linked, rbds circularly linked.
* First rfd is linked to scp, first rbd is linked to first
* rfd. Last rbd has a suspend command.
*/
addr = RX_AREA_START;
do {
next = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
if (next2 >= RX_AREA_END) {
next = RX_AREA_START;
init_rfd.rfd_command = RFD_CMDEL | RFD_CMDSUSPEND;
priv(dev)->rx_tail = addr;
} else
init_rfd.rfd_command = 0;
if (addr == RX_AREA_START)
init_rfd.rfd_rbdoffset = addr + RFD_SIZE;
else
init_rfd.rfd_rbdoffset = 0;
init_rfd.rfd_link = next;
init_rbd.rbd_link = next + RFD_SIZE;
init_rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE;
ether1_writebuffer (dev, &init_rfd, addr, RFD_SIZE);
ether1_writebuffer (dev, &init_rbd, addr + RFD_SIZE, RBD_SIZE);
addr = next;
} while (next2 < RX_AREA_END);
priv(dev)->tx_link = NOP_ADDR;
priv(dev)->tx_head = NOP_ADDR + NOP_SIZE;
priv(dev)->tx_tail = TDR_ADDR;
priv(dev)->rx_head = RX_AREA_START;
/* release reset & give 586 a prod */
priv(dev)->resetting = 1;
priv(dev)->initialising = 1;
writeb(CTRL_RST, REG_CONTROL);
writeb(0, REG_CONTROL);
writeb(CTRL_CA, REG_CONTROL);
/* 586 should now unset iscp.busy */
timeout = jiffies + HZ/2;
while (ether1_readw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) {
if (time_after(jiffies, timeout)) {
printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name);
return 1;
}
}
/* check status of commands that we issued */
timeout += HZ/10;
while (((status = ether1_readw(dev, CFG_ADDR, cfg_t, cfg_status, DISABLEIRQS))
& STAT_COMPLETE) == 0) {
if (time_after(jiffies, timeout))
break;
}
if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status);
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
failures += 1;
}
timeout += HZ/10;
while (((status = ether1_readw(dev, SA_ADDR, sa_t, sa_status, DISABLEIRQS))
& STAT_COMPLETE) == 0) {
if (time_after(jiffies, timeout))
break;
}
if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status);
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
failures += 1;
}
timeout += HZ/10;
while (((status = ether1_readw(dev, MC_ADDR, mc_t, mc_status, DISABLEIRQS))
& STAT_COMPLETE) == 0) {
if (time_after(jiffies, timeout))
break;
}
if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status);
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
failures += 1;
}
timeout += HZ;
while (((status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_status, DISABLEIRQS))
& STAT_COMPLETE) == 0) {
if (time_after(jiffies, timeout))
break;
}
if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name);
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
} else {
status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS);
if (status & TDR_XCVRPROB)
printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name);
else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) {
#ifdef FANCY
printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name,
status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10,
(status & TDR_TIME) % 10);
#else
printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name,
status & TDR_SHORT ? "short" : "open", (status & TDR_TIME));
#endif
}
}
if (failures)
ether1_reset (dev);
return failures ? 1 : 0;
}
/* ------------------------------------------------------------------------- */
static int
ether1_txalloc (struct net_device *dev, int size)
{
int start, tail;
size = (size + 1) & ~1;
tail = priv(dev)->tx_tail;
if (priv(dev)->tx_head + size > TX_AREA_END) {
if (tail > priv(dev)->tx_head)
return -1;
start = TX_AREA_START;
if (start + size > tail)
return -1;
priv(dev)->tx_head = start + size;
} else {
if (priv(dev)->tx_head < tail && (priv(dev)->tx_head + size) > tail)
return -1;
start = priv(dev)->tx_head;
priv(dev)->tx_head += size;
}
return start;
}
static int
ether1_open (struct net_device *dev)
{
if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev))
return -EAGAIN;
if (ether1_init_for_open (dev)) {
free_irq (dev->irq, dev);
return -EAGAIN;
}
netif_start_queue(dev);
return 0;
}
static void
ether1_timeout(struct net_device *dev, unsigned int txqueue)
{
printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n",
dev->name);
printk(KERN_WARNING "%s: resetting device\n", dev->name);
ether1_reset (dev);
if (ether1_init_for_open (dev))
printk (KERN_ERR "%s: unable to restart interface\n", dev->name);
dev->stats.tx_errors++;
netif_wake_queue(dev);
}
static netdev_tx_t
ether1_sendpacket (struct sk_buff *skb, struct net_device *dev)
{
int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr;
unsigned long flags;
tx_t tx;
tbd_t tbd;
nop_t nop;
if (priv(dev)->restart) {
printk(KERN_WARNING "%s: resetting device\n", dev->name);
ether1_reset(dev);
if (ether1_init_for_open(dev))
printk(KERN_ERR "%s: unable to restart interface\n", dev->name);
else
priv(dev)->restart = 0;
}
if (skb->len < ETH_ZLEN) {
if (skb_padto(skb, ETH_ZLEN))
goto out;
}
/*
* insert packet followed by a nop
*/
txaddr = ether1_txalloc (dev, TX_SIZE);
tbdaddr = ether1_txalloc (dev, TBD_SIZE);
dataddr = ether1_txalloc (dev, skb->len);
nopaddr = ether1_txalloc (dev, NOP_SIZE);
tx.tx_status = 0;
tx.tx_command = CMD_TX | CMD_INTR;
tx.tx_link = nopaddr;
tx.tx_tbdoffset = tbdaddr;
tbd.tbd_opts = TBD_EOL | skb->len;
tbd.tbd_link = I82586_NULL;
tbd.tbd_bufl = dataddr;
tbd.tbd_bufh = 0;
nop.nop_status = 0;
nop.nop_command = CMD_NOP;
nop.nop_link = nopaddr;
local_irq_save(flags);
ether1_writebuffer (dev, &tx, txaddr, TX_SIZE);
ether1_writebuffer (dev, &tbd, tbdaddr, TBD_SIZE);
ether1_writebuffer (dev, skb->data, dataddr, skb->len);
ether1_writebuffer (dev, &nop, nopaddr, NOP_SIZE);
tmp = priv(dev)->tx_link;
priv(dev)->tx_link = nopaddr;
/* now reset the previous nop pointer */
ether1_writew(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS);
local_irq_restore(flags);
/* handle transmit */
/* check to see if we have room for a full sized ether frame */
tmp = priv(dev)->tx_head;
tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
priv(dev)->tx_head = tmp;
dev_kfree_skb (skb);
if (tst == -1)
netif_stop_queue(dev);
out:
return NETDEV_TX_OK;
}
static void
ether1_xmit_done (struct net_device *dev)
{
nop_t nop;
int caddr, tst;
caddr = priv(dev)->tx_tail;
again:
ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
switch (nop.nop_command & CMD_MASK) {
case CMD_TDR:
/* special case */
if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
!= (unsigned short)I82586_NULL) {
ether1_writew(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t,
scb_command, NORMALIRQS);
writeb(CTRL_CA, REG_CONTROL);
}
priv(dev)->tx_tail = NOP_ADDR;
return;
case CMD_NOP:
if (nop.nop_link == caddr) {
if (priv(dev)->initialising == 0)
printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name);
else
priv(dev)->initialising = 0;
return;
}
if (caddr == nop.nop_link)
return;
caddr = nop.nop_link;
goto again;
case CMD_TX:
if (nop.nop_status & STAT_COMPLETE)
break;
printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name);
priv(dev)->restart = 1;
return;
default:
printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name,
nop.nop_command & CMD_MASK, caddr);
priv(dev)->restart = 1;
return;
}
while (nop.nop_status & STAT_COMPLETE) {
if (nop.nop_status & STAT_OK) {
dev->stats.tx_packets++;
dev->stats.collisions += (nop.nop_status & STAT_COLLISIONS);
} else {
dev->stats.tx_errors++;
if (nop.nop_status & STAT_COLLAFTERTX)
dev->stats.collisions++;
if (nop.nop_status & STAT_NOCARRIER)
dev->stats.tx_carrier_errors++;
if (nop.nop_status & STAT_TXLOSTCTS)
printk (KERN_WARNING "%s: cts lost\n", dev->name);
if (nop.nop_status & STAT_TXSLOWDMA)
dev->stats.tx_fifo_errors++;
if (nop.nop_status & STAT_COLLEXCESSIVE)
dev->stats.collisions += 16;
}
if (nop.nop_link == caddr) {
printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name);
break;
}
caddr = nop.nop_link;
ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
if ((nop.nop_command & CMD_MASK) != CMD_NOP) {
printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name);
break;
}
if (caddr == nop.nop_link)
break;
caddr = nop.nop_link;
ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
if ((nop.nop_command & CMD_MASK) != CMD_TX) {
printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name);
break;
}
}
priv(dev)->tx_tail = caddr;
caddr = priv(dev)->tx_head;
tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
priv(dev)->tx_head = caddr;
if (tst != -1)
netif_wake_queue(dev);
}
static void
ether1_recv_done (struct net_device *dev)
{
int status;
int nexttail, rbdaddr;
rbd_t rbd;
do {
status = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_status, NORMALIRQS);
if ((status & RFD_COMPLETE) == 0)
break;
rbdaddr = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS);
ether1_readbuffer (dev, &rbd, rbdaddr, RBD_SIZE);
if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) {
int length = rbd.rbd_status & RBD_ACNT;
struct sk_buff *skb;
length = (length + 1) & ~1;
skb = netdev_alloc_skb(dev, length + 2);
if (skb) {
skb_reserve (skb, 2);
ether1_readbuffer (dev, skb_put (skb, length), rbd.rbd_bufl, length);
skb->protocol = eth_type_trans (skb, dev);
netif_rx (skb);
dev->stats.rx_packets++;
} else
dev->stats.rx_dropped++;
} else {
printk(KERN_WARNING "%s: %s\n", dev->name,
(rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid");
dev->stats.rx_dropped++;
}
nexttail = ether1_readw(dev, priv(dev)->rx_tail, rfd_t, rfd_link, NORMALIRQS);
/* nexttail should be rx_head */
if (nexttail != priv(dev)->rx_head)
printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n",
dev->name, nexttail, priv(dev)->rx_head);
ether1_writew(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, rfd_command, NORMALIRQS);
ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS);
ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS);
ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS);
priv(dev)->rx_tail = nexttail;
priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS);
} while (1);
}
static irqreturn_t
ether1_interrupt (int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *)dev_id;
int status;
status = ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS);
if (status) {
ether1_writew(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX),
SCB_ADDR, scb_t, scb_command, NORMALIRQS);
writeb(CTRL_CA | CTRL_ACK, REG_CONTROL);
if (status & SCB_STCX) {
ether1_xmit_done (dev);
}
if (status & SCB_STCNA) {
if (priv(dev)->resetting == 0)
printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name);
else
priv(dev)->resetting += 1;
if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
!= (unsigned short)I82586_NULL) {
ether1_writew(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
writeb(CTRL_CA, REG_CONTROL);
}
if (priv(dev)->resetting == 2)
priv(dev)->resetting = 0;
}
if (status & SCB_STFR) {
ether1_recv_done (dev);
}
if (status & SCB_STRNR) {
if (ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) {
printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name);
ether1_writew(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
writeb(CTRL_CA, REG_CONTROL);
dev->stats.rx_dropped++; /* we suspended due to lack of buffer space */
} else
printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name,
ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS));
printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset,
NORMALIRQS));
}
} else
writeb(CTRL_ACK, REG_CONTROL);
return IRQ_HANDLED;
}
static int
ether1_close (struct net_device *dev)
{
ether1_reset (dev);
free_irq(dev->irq, dev);
return 0;
}
/*
* Set or clear the multicast filter for this adaptor.
* num_addrs == -1 Promiscuous mode, receive all packets.
* num_addrs == 0 Normal mode, clear multicast list.
* num_addrs > 0 Multicast mode, receive normal and MC packets, and do
* best-effort filtering.
*/
static void
ether1_setmulticastlist (struct net_device *dev)
{
}
/* ------------------------------------------------------------------------- */
static void ether1_banner(void)
{
static unsigned int version_printed = 0;
if (net_debug && version_printed++ == 0)
printk(KERN_INFO "%s", version);
}
static const struct net_device_ops ether1_netdev_ops = {
.ndo_open = ether1_open,
.ndo_stop = ether1_close,
.ndo_start_xmit = ether1_sendpacket,
.ndo_set_rx_mode = ether1_setmulticastlist,
.ndo_tx_timeout = ether1_timeout,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
};
static int
ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct net_device *dev;
u8 addr[ETH_ALEN];
int i, ret = 0;
ether1_banner();
ret = ecard_request_resources(ec);
if (ret)
goto out;
dev = alloc_etherdev(sizeof(struct ether1_priv));
if (!dev) {
ret = -ENOMEM;
goto release;
}
SET_NETDEV_DEV(dev, &ec->dev);
dev->irq = ec->irq;
priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!priv(dev)->base) {
ret = -ENOMEM;
goto free;
}
if ((priv(dev)->bus_type = ether1_reset(dev)) == 0) {
ret = -ENODEV;
goto free;
}
for (i = 0; i < 6; i++)
addr[i] = readb(IDPROM_ADDRESS + (i << 2));
eth_hw_addr_set(dev, addr);
if (ether1_init_2(dev)) {
ret = -ENODEV;
goto free;
}
dev->netdev_ops = &ether1_netdev_ops;
dev->watchdog_timeo = 5 * HZ / 100;
ret = register_netdev(dev);
if (ret)
goto free;
printk(KERN_INFO "%s: ether1 in slot %d, %pM\n",
dev->name, ec->slot_no, dev->dev_addr);
ecard_set_drvdata(ec, dev);
return 0;
free:
free_netdev(dev);
release:
ecard_release_resources(ec);
out:
return ret;
}
static void ether1_remove(struct expansion_card *ec)
{
struct net_device *dev = ecard_get_drvdata(ec);
ecard_set_drvdata(ec, NULL);
unregister_netdev(dev);
free_netdev(dev);
ecard_release_resources(ec);
}
static const struct ecard_id ether1_ids[] = {
{ MANU_ACORN, PROD_ACORN_ETHER1 },
{ 0xffff, 0xffff }
};
static struct ecard_driver ether1_driver = {
.probe = ether1_probe,
.remove = ether1_remove,
.id_table = ether1_ids,
.drv = {
.name = "ether1",
},
};
static int __init ether1_init(void)
{
return ecard_register_driver(&ether1_driver);
}
static void __exit ether1_exit(void)
{
ecard_remove_driver(&ether1_driver);
}
module_init(ether1_init);
module_exit(ether1_exit);
MODULE_LICENSE("GPL");