blob: 9085d8c76ce1545280a046eb7afa3b1587be5e7d [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
*
* Copyright (C) 2021 Renesas Electronics Corp.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
&pinctrl {
pinctrl-0 = <&sound_clk_pins>;
pinctrl-names = "default";
can0_pins: can0 {
pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
<RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
};
/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
can0-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "can0_stb";
};
can1_pins: can1 {
pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
<RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
};
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
can1-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "can1_stb";
};
i2c0_pins: i2c0 {
pins = "RIIC0_SDA", "RIIC0_SCL";
input-enable;
};
i2c1_pins: i2c1 {
pins = "RIIC1_SDA", "RIIC1_SCL";
input-enable;
};
i2c3_pins: i2c3 {
pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
<RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
};
scif0_pins: scif0 {
pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
<RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
};
scif2_pins: scif2 {
pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
<RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
<RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
<RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
};
sd1-pwr-en-hog {
gpio-hog;
gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "sd1_pwr_en";
};
sdhi1_pins: sd1 {
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
power-source = <3300>;
};
sd1_ctrl {
pins = "SD1_CLK", "SD1_CMD";
power-source = <3300>;
};
sd1_mux {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
};
};
sdhi1_pins_uhs: sd1_uhs {
sd1_data_uhs {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
power-source = <1800>;
};
sd1_ctrl_uhs {
pins = "SD1_CLK", "SD1_CMD";
power-source = <1800>;
};
sd1_mux_uhs {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
};
};
sound_clk_pins: sound_clk {
pins = "AUDIO_CLK1", "AUDIO_CLK2";
input-enable;
};
spi1_pins: spi1 {
pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
<RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
<RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
<RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
};
ssi0_pins: ssi0 {
pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
<RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
<RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
<RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
};
usb0_pins: usb0 {
pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
<RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
<RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
};
usb1_pins: usb1 {
pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
<RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
};
};