blob: 80ca8b1a81de2fd68aa03b70e5b930644b3221cf [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-mv78x00/rd78x00-masa-setup.c
*
* Marvell RD-78x00-mASA Development Board Setup
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "mv78xx0.h"
#include "common.h"
static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(9),
};
static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
};
static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
};
static struct mv_sata_platform_data rd78x00_masa_sata_data = {
.n_ports = 2,
};
static void __init rd78x00_masa_init(void)
{
/*
* Basic MV78x00 setup. Needs to be called early.
*/
mv78xx0_init();
/*
* Partition on-chip peripherals between the two CPU cores.
*/
if (mv78xx0_core_index() == 0) {
mv78xx0_ehci0_init();
mv78xx0_ehci1_init();
mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
mv78xx0_sata_init(&rd78x00_masa_sata_data);
mv78xx0_uart0_init();
mv78xx0_uart2_init();
} else {
mv78xx0_ehci2_init();
mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
mv78xx0_uart1_init();
mv78xx0_uart3_init();
}
}
static int __init rd78x00_pci_init(void)
{
/*
* Assign all PCIe devices to CPU core #0.
*/
if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
mv78xx0_pcie_init(1, 1);
return 0;
}
subsys_initcall(rd78x00_pci_init);
MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.nr_irqs = MV78XX0_NR_IRQS,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.init_time = mv78xx0_timer_init,
.restart = mv78xx0_restart,
MACHINE_END