blob: ae9bbe0320b8da4ae1139d4be40ebd1408e4fccd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for Sunplus SP7021
*
* Copyright (C) 2021 Sunplus Technology Co.
*/
#include <dt-bindings/clock/sunplus,sp7021-clkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/reset/sunplus,sp7021-reset.h>
#include <dt-bindings/pinctrl/sppctl-sp7021.h>
#include <dt-bindings/gpio/gpio.h>
#define XTAL 27000000
/ {
compatible = "sunplus,sp7021";
model = "Sunplus SP7021";
clocks {
extclk: osc0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <XTAL>;
clock-output-names = "extclk";
};
};
soc@9c000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x9c000000 0x400000>;
interrupt-parent = <&intc>;
clkc: clock-controller@4 {
compatible = "sunplus,sp7021-clkc";
reg = <0x4 0x28>,
<0x200 0x44>,
<0x268 0x04>;
clocks = <&extclk>;
#clock-cells = <1>;
};
intc: interrupt-controller@780 {
compatible = "sunplus,sp7021-intc";
reg = <0x780 0x80>, <0xa80 0x80>;
interrupt-controller;
#interrupt-cells = <2>;
};
otp: otp@af00 {
compatible = "sunplus,sp7021-ocotp";
reg = <0xaf00 0x34>, <0xaf80 0x58>;
reg-names = "hb_gpio", "otprx";
clocks = <&clkc CLK_OTPRX>;
resets = <&rstc RST_OTPRX>;
#address-cells = <1>;
#size-cells = <1>;
therm_calib: thermal-calibration@14 {
reg = <0x14 0x3>;
};
disc_vol: disconnect-voltage@18 {
reg = <0x18 0x2>;
};
mac_addr0: mac-address0@34 {
reg = <0x34 0x6>;
};
mac_addr1: mac-address1@3a {
reg = <0x3a 0x6>;
};
};
pctl: pinctrl@100 {
compatible = "sunplus,sp7021-pctl";
reg = <0x100 0x100>,
<0x300 0x100>,
<0x32e4 0x1C>,
<0x80 0x20>;
reg-names = "moon2", "gpioxt", "first", "moon1";
gpio-controller;
#gpio-cells = <2>;
clocks = <&clkc CLK_GPIO>;
resets = <&rstc RST_GPIO>;
emac_pins: pinmux-emac-pins {
sunplus,pins = <
SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
>;
sunplus,zerofunc = <
MUXF_L2SW_LED_FLASH0
MUXF_L2SW_LED_FLASH1
MUXF_L2SW_LED_ON0
MUXF_L2SW_LED_ON1
MUXF_DAISY_MODE
>;
};
emmc_pins: pinmux-emmc-pins {
function = "CARD0_EMMC";
groups = "CARD0_EMMC";
};
leds_pins: pinmux-leds-pins {
sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
};
sdcard_pins: pinmux-sdcard-pins {
function = "SD_CARD";
groups = "SD_CARD";
sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
};
spi0_pins: pinmux-spi0-pins {
sunplus,pins = <
SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0)
SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0)
SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0)
SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0)
>;
};
uart0_pins: pinmux-uart0-pins {
function = "UA0";
groups = "UA0";
};
uart1_pins: pinmux-uart1-pins {
sunplus,pins = <
SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
>;
};
uart2_pins: pinmux-uart2-pins {
sunplus,pins = <
SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0)
SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0)
SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0)
SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0)
>;
};
uart4_pins: pinmux-uart4-pins {
sunplus,pins = <
SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0)
SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0)
>;
};
};
rstc: reset@54 {
compatible = "sunplus,sp7021-reset";
reg = <0x54 0x28>;
#reset-cells = <1>;
};
rtc: rtc@3a00 {
compatible = "sunplus,sp7021-rtc";
reg = <0x3a00 0x80>;
reg-names = "rtc";
clocks = <&clkc CLK_RTC>;
resets = <&rstc RST_RTC>;
interrupts = <163 IRQ_TYPE_EDGE_RISING>;
};
spi_controller0: spi@2d80 {
compatible = "sunplus,sp7021-spi";
reg = <0x2d80 0x80>, <0x2e00 0x80>;
reg-names = "master", "slave";
interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
<146 IRQ_TYPE_LEVEL_HIGH>,
<145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dma_w", "master_risc", "slave_risc";
clocks = <&clkc CLK_SPI_COMBO_0>;
resets = <&rstc RST_SPI_COMBO_0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>,
<&pctl 28 GPIO_ACTIVE_LOW>;
};
spi_controller1: spi@f480 {
compatible = "sunplus,sp7021-spi";
reg = <0xf480 0x80>, <0xf500 0x80>;
reg-names = "master", "slave";
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>,
<69 IRQ_TYPE_LEVEL_HIGH>,
<68 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dma_w", "master_risc", "slave_risc";
clocks = <&clkc CLK_SPI_COMBO_1>;
resets = <&rstc RST_SPI_COMBO_1>;
status = "disabled";
};
spi_controller2: spi@f600 {
compatible = "sunplus,sp7021-spi";
reg = <0xf600 0x80>, <0xf680 0x80>;
reg-names = "master", "slave";
interrupts = <70 IRQ_TYPE_LEVEL_HIGH>,
<72 IRQ_TYPE_LEVEL_HIGH>,
<71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dma_w", "master_risc", "slave_risc";
clocks = <&clkc CLK_SPI_COMBO_2>;
resets = <&rstc RST_SPI_COMBO_2>;
status = "disabled";
};
spi_controller3: spi@f780 {
compatible = "sunplus,sp7021-spi";
reg = <0xf780 0x80>, <0xf800 0x80>;
reg-names = "master", "slave";
interrupts = <73 IRQ_TYPE_LEVEL_HIGH>,
<75 IRQ_TYPE_LEVEL_HIGH>,
<74 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dma_w", "master_risc", "slave_risc";
clocks = <&clkc CLK_SPI_COMBO_3>;
resets = <&rstc RST_SPI_COMBO_3>;
status = "disabled";
};
uart0: serial@900 {
compatible = "sunplus,sp7021-uart";
reg = <0x900 0x80>;
interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLK_UA0>;
resets = <&rstc RST_UA0>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
uart1: serial@980 {
compatible = "sunplus,sp7021-uart";
reg = <0x980 0x80>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLK_UA1>;
resets = <&rstc RST_UA1>;
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
uart2: serial@800 {
compatible = "sunplus,sp7021-uart";
reg = <0x800 0x80>;
interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLK_UA2>;
resets = <&rstc RST_UA2>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
uart3: serial@880 {
compatible = "sunplus,sp7021-uart";
reg = <0x880 0x80>;
interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLK_UA3>;
resets = <&rstc RST_UA3>;
status = "disabled";
};
uart4: serial@8780 {
compatible = "sunplus,sp7021-uart";
reg = <0x8780 0x80>;
interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLK_UA4>;
resets = <&rstc RST_UA4>;
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
status = "disabled";
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_pins>;
system-led {
label = "system-led";
gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
};
};