blob: 365fbac417fd1303ed3919d473ce98b3e53b1487 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "8devices Jalapeno";
compatible = "8dev,jalapeno", "qcom,ipq4018";
};
&tlmm {
mdio_pins: mdio_pinmux {
pinmux_1 {
pins = "gpio53";
function = "mdio";
};
pinmux_2 {
pins = "gpio52";
function = "mdc";
};
pinconf {
pins = "gpio52", "gpio53";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&watchdog {
status = "okay";
};
&prng {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
status = "okay";
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0x000e0000 0x00010000>;
};
partition@f0000 {
label = "u-boot";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
};
};
spi-nand@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi1";
reg = <0x00000000 0x04000000>;
};
partition@4000000 {
label = "ubi2";
reg = <0x04000000 0x04000000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3 {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&usb2 {
status = "okay";
};