blob: 815ef7719d13c72159a2688eb2fe2c48875e03ba [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "marvell,feroceon";
reg = <0>;
clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
clock-names = "cpu_clk", "ddrclk", "powersave";
};
};
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
i2c0 = &i2c0;
};
mbus@f1000000 {
compatible = "marvell,kirkwood-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
/* If a board file needs to change this ranges it must replace it completely */
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 /* internal-regs */
MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000 /* nand flash */
MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000 /* crypto sram */
>;
controller = <&mbusc>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
nand: nand@12f {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
ale = <1>;
bank-width = <1>;
compatible = "marvell,orion-nand";
reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "disabled";
};
crypto_sram: sa-sram@301 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
clocks = <&gate_clk 17>;
#address-cells = <1>;
#size-cells = <1>;
};
};
ocp@f1000000 {
compatible = "simple-bus";
ranges = <0x00000000 0xf1000000 0x0100000>;
#address-cells = <1>;
#size-cells = <1>;
pinctrl: pin-controller@10000 {
/* set compatible property in SoC file */
reg = <0x10000 0x20>;
pmx_ge1: pmx-ge1 {
marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
"mpp24", "mpp25", "mpp26", "mpp27",
"mpp30", "mpp31", "mpp32", "mpp33";
marvell,function = "ge1";
};
pmx_nand: pmx-nand {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp18", "mpp19";
marvell,function = "nand";
};
/*
* Default SPI0 pinctrl setting with CSn on mpp0,
* overwrite marvell,pins on board level if required.
*/
pmx_spi: pmx-spi {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
marvell,function = "spi";
};
pmx_twsi0: pmx-twsi0 {
marvell,pins = "mpp8", "mpp9";
marvell,function = "twsi0";
};
/*
* Default UART pinctrl setting without RTS/CTS,
* overwrite marvell,pins on board level if required.
*/
pmx_uart0: pmx-uart0 {
marvell,pins = "mpp10", "mpp11";
marvell,function = "uart0";
};
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp13", "mpp14";
marvell,function = "uart1";
};
};
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
#clock-cells = <1>;
};
spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <23>;
reg = <0x10600 0x28>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
status = "disabled";
};
gpio0: gpio@10100 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10140 0x40>;
ngpios = <18>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
clocks = <&gate_clk 7>;
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <29>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_twsi0>;
pinctrl-names = "default";
status = "disabled";
};
uart0: serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
status = "disabled";
};
uart1: serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "disabled";
};
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x80>, <0x1500 0x20>;
};
sysc: system-controller@20000 {
compatible = "marvell,orion-system-controller";
reg = <0x20000 0x120>;
};
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <1>;
marvell,#interrupts = <6>;
};
gate_clk: clock-gating-control@2011c {
compatible = "marvell,kirkwood-gating-clock";
reg = <0x2011c 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
l2: l2-cache@20128 {
compatible = "marvell,kirkwood-cache";
reg = <0x20128 0x4>;
};
intc: interrupt-controller@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20200 0x10>, <0x20210 0x10>;
};
timer: timer@20300 {
compatible = "marvell,orion-timer";
reg = <0x20300 0x20>;
interrupt-parent = <&bridge_intc>;
interrupts = <1>, <2>;
clocks = <&core_clk 0>;
};
wdt: watchdog-timer@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>, <0x20108 0x4>;
interrupt-parent = <&bridge_intc>;
interrupts = <3>;
clocks = <&gate_clk 7>;
status = "okay";
};
cesa: crypto@30000 {
compatible = "marvell,kirkwood-crypto";
reg = <0x30000 0x10000>;
reg-names = "regs";
interrupts = <22>;
clocks = <&gate_clk 17>;
marvell,crypto-srams = <&crypto_sram>;
marvell,crypto-sram-size = <0x800>;
status = "okay";
};
usb0: ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
clocks = <&gate_clk 3>;
status = "okay";
};
dma0: xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60A00 0x100>;
status = "okay";
clocks = <&gate_clk 8>;
xor00 {
interrupts = <5>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
interrupts = <6>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
dma1: xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60B00 0x100>;
status = "okay";
clocks = <&gate_clk 16>;
xor00 {
interrupts = <7>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
interrupts = <8>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
eth0: ethernet-controller@72000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
clocks = <&gate_clk 0>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
eth0port: ethernet0-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <46>;
clocks = <&gate_clk 0>;
status = "disabled";
/* add phy nodes in board file */
};
eth1: ethernet-controller@76000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76000 0x4000>;
clocks = <&gate_clk 19>;
marvell,tx-checksum-limit = <1600>;
pinctrl-0 = <&pmx_ge1>;
pinctrl-names = "default";
status = "disabled";
eth1port: ethernet1-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
sata_phy0: sata-phy@82000 {
compatible = "marvell,mvebu-sata-phy";
reg = <0x82000 0x0334>;
clocks = <&gate_clk 14>;
clock-names = "sata";
#phy-cells = <0>;
status = "okay";
};
sata_phy1: sata-phy@84000 {
compatible = "marvell,mvebu-sata-phy";
reg = <0x84000 0x0334>;
clocks = <&gate_clk 15>;
clock-names = "sata";
#phy-cells = <0>;
status = "okay";
};
audio0: audio-controller@a0000 {
compatible = "marvell,kirkwood-audio";
#sound-dai-cells = <0>;
reg = <0xa0000 0x2210>;
interrupts = <24>;
clocks = <&gate_clk 9>;
clock-names = "internal";
status = "disabled";
};
};
};