blob: 2497ad26b5b63a6a66e4a8839c1afaad89ee5df6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree file for LaCie 5Big Network v2
*
* Copyright (C) 2014
*
* Andrew Lunn <andrew@lunn.ch>
*
* Based on netxbig_v2-setup.c,
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
*
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
#include "kirkwood-netxbig.dtsi"
/ {
model = "LaCie 5Big Network v2";
compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
};
&regulators {
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "hdd1power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "hdd2power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "hdd3power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "hdd4power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
clocks {
g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
netxbig-leds {
blue-sata2 {
label = "netxbig:blue:sata2";
mode-addr = <5>;
mode-val = <NETXBIG_LED_OFF 0
NETXBIG_LED_ON 7
NETXBIG_LED_SATA 1
NETXBIG_LED_TIMER1 3>;
bright-addr = <2>;
max-brightness = <7>;
};
red-sata2 {
label = "netxbig:red:sata2";
mode-addr = <5>;
mode-val = <NETXBIG_LED_OFF 0
NETXBIG_LED_ON 2
NETXBIG_LED_TIMER1 4>;
bright-addr = <2>;
max-brightness = <7>;
};
blue-sata3 {
label = "netxbig:blue:sata3";
mode-addr = <6>;
mode-val = <NETXBIG_LED_OFF 0
NETXBIG_LED_ON 7
NETXBIG_LED_SATA 1
NETXBIG_LED_TIMER1 3>;
bright-addr = <2>;
max-brightness = <7>;
};
red-sata3 {
label = "netxbig:red:sata3";
mode-addr = <6>;
mode-val = <NETXBIG_LED_OFF 0
NETXBIG_LED_ON 2
NETXBIG_LED_TIMER1 4>;
bright-addr = <2>;
max-brightness = <7>;
};
blue-sata4 {
label = "netxbig:blue:sata4";
mode-addr = <7>;
mode-val = <NETXBIG_LED_OFF 0
NETXBIG_LED_ON 7
NETXBIG_LED_SATA 1
NETXBIG_LED_TIMER1 3>;
bright-addr = <2>;
max-brightness = <7>;
};
red-sata4 {
label = "netxbig:red:sata4";
mode-addr = <7>;
mode-val = <NETXBIG_LED_OFF 0
NETXBIG_LED_ON 2
NETXBIG_LED_TIMER1 4>;
bright-addr = <2>;
max-brightness = <7>;
};
};
};
&mdio {
ethphy1: ethernet-phy@1 {
reg = <0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
&i2c0 {
g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
clocks = <&g762_clk>;
};
};