blob: 84f884d6e55bc2af7237dc7d5ca4a919e3289959 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2021 PHYTEC Messtechnik GmbH
* Author: Yunus Bas <y.bas@phytec.de>
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
reg_wl_en: regulator-wl-en {
compatible = "regulator-fixed";
regulator-name = "wlan_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wl>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
status = "disabled";
};
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_bt>;
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
&usdhc3 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3_wl>;
vmmc-supply = <&reg_wl_en>;
bus-width = <4>;
non-removable;
no-1-8-v;
status = "disabled";
brmcf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
};
};
&iomuxc {
pinctrl_uart3_bt: uart3grp-bt {
fsl,pins = <
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0xb0b1 /* BT ENABLE */
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0xb0b1 /* DEV WAKEUP */
MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0xb0b1 /* HOST WAKEUP */
>;
};
pinctrl_usdhc3_wl: usdhc3grp-wl {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
pinctrl_wl: wlgrp {
fsl,pins = <
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0xb0b1 /* WLAN ENABLE */
>;
};
};