blob: c54451dde6dd4b5d4630ac8bbab000e99bee0872 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
*
* Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
*/
#include "bcm958625-meraki-mx6x-common.dtsi"
/ {
keys {
compatible = "gpio-keys-polled";
autorepeat;
poll-interval = <20>;
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
/* green:wan1-left */
function = LED_FUNCTION_ACTIVITY;
function-enumerator = <0>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
};
led-1 {
/* green:wan1-right */
function = LED_FUNCTION_ACTIVITY;
function-enumerator = <1>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
};
led-2 {
/* green:wan2-left */
function = LED_FUNCTION_ACTIVITY;
function-enumerator = <2>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
};
led-3 {
/* green:wan2-right */
function = LED_FUNCTION_ACTIVITY;
function-enumerator = <3>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
};
led-4 {
/* amber:power */
function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
};
led-5 {
/* white:status */
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_WHITE>;
gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
};
};
};
&axi {
mdio-mux@3f1c0 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
reg = <0x3f1c0 0x4>;
mux-mask = <0x2000>;
mdio-parent-bus = <&mdio_ext>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
phy_port6: phy@0 {
reg = <0>;
};
phy_port7: phy@1 {
reg = <1>;
};
phy_port8: phy@2 {
reg = <2>;
};
phy_port9: phy@3 {
reg = <3>;
};
phy_port10: phy@4 {
reg = <4>;
};
switch@10 {
compatible = "qca,qca8337";
reg = <0x10>;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ethernet = <&sgmii1>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
qca,sgmii-txclk-falling-edge;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan8";
phy-handle = <&phy_port6>;
};
port@2 {
reg = <2>;
label = "lan9";
phy-handle = <&phy_port7>;
};
port@3 {
reg = <3>;
label = "lan10";
phy-handle = <&phy_port8>;
};
port@4 {
reg = <4>;
label = "lan11";
phy-handle = <&phy_port9>;
};
port@5 {
reg = <5>;
label = "lan12";
phy-handle = <&phy_port10>;
};
};
};
};
mdio-mii@2000 {
reg = <0x2000>;
#address-cells = <1>;
#size-cells = <0>;
phy_port1: phy@0 {
reg = <0>;
};
phy_port2: phy@1 {
reg = <1>;
};
phy_port3: phy@2 {
reg = <2>;
};
phy_port4: phy@3 {
reg = <3>;
};
phy_port5: phy@4 {
reg = <4>;
};
switch@10 {
compatible = "qca,qca8337";
reg = <0x10>;
dsa,member = <2 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ethernet = <&sgmii0>;
phy-mode = "sgmii";
qca,sgmii-enable-pll;
qca,sgmii-txclk-falling-edge;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan3";
phy-handle = <&phy_port1>;
};
port@2 {
reg = <2>;
label = "lan4";
phy-handle = <&phy_port2>;
};
port@3 {
reg = <3>;
label = "lan5";
phy-handle = <&phy_port3>;
};
port@4 {
reg = <4>;
label = "lan6";
phy-handle = <&phy_port4>;
};
port@5 {
reg = <5>;
label = "lan7";
phy-handle = <&phy_port5>;
};
};
};
};
};
};
&srab {
compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
status = "okay";
dsa,member = <0 0>;
ports {
port@0 {
label = "wan1";
reg = <0>;
};
port@1 {
label = "wan2";
reg = <1>;
};
sgmii0: port@4 {
label = "sw0";
reg = <4>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
sgmii1: port@5 {
label = "sw1";
reg = <5>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@8 {
ethernet = <&amac2>;
reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};