blob: e583b9cbf07c0f8d1935bbd2c644ba1f92d1b2cd [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
* Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
*/
#include "bcm4708.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
#include <dt-bindings/leds/common.h>
/ {
spi {
compatible = "spi-gpio";
num-chipselects = <1>;
gpio-sck = <&chipcommon 7 0>;
gpio-mosi = <&chipcommon 4 0>;
cs-gpios = <&chipcommon 6 0>;
#address-cells = <1>;
#size-cells = <0>;
hc595: gpio_spi@0 {
compatible = "fairchild,74hc595";
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
gpio-controller;
#gpio-cells = <2>;
};
};
leds {
compatible = "gpio-leds";
led-usb {
/* label = "bcm53xx:blue:usb"; */
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_BLUE>;
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>, <&ohci_port2>,
<&ehci_port2>;
linux,default-trigger = "usbport";
};
led-power0 {
/* label = "bcm53xx:red:power"; */
function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_RED>;
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
};
led-power1 {
/* label = "bcm53xx:white:power"; */
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_WHITE>;
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led-router0 {
/* label = "bcm53xx:blue:router"; */
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led-router1 {
/* label = "bcm53xx:amber:router"; */
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_AMBER>;
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
};
led-wan {
/* label = "bcm53xx:blue:wan"; */
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led-wireless0 {
/* label = "bcm53xx:blue:wireless"; */
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
};
led-wireless1 {
/* label = "bcm53xx:amber:wireless"; */
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_AMBER>;
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys";
button-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
};
button-aoss {
label = "AOSS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
};
/* Commit mode set by switch? */
button-mode {
label = "Mode";
linux,code = <KEY_SETUP>;
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
};
/* Switch: AP mode */
button-sw-ap {
label = "AP";
linux,code = <BTN_0>;
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
};
button-eject {
label = "USB eject";
linux,code = <KEY_EJECTCD>;
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
&spi_nor {
status = "okay";
};
&usb3_phy {
status = "okay";
};
&srab {
status = "okay";
ports {
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&gmac0>;
};
};
};