| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2013 Regents of the University of California |
| */ |
| |
| |
| #include <linux/linkage.h> |
| #include <asm/asm.h> |
| |
| /* void *memset(void *, int, size_t) */ |
| SYM_FUNC_START(__memset) |
| move t0, a0 /* Preserve return value */ |
| |
| /* Defer to byte-oriented fill for small sizes */ |
| sltiu a3, a2, 16 |
| bnez a3, 4f |
| |
| /* |
| * Round to nearest XLEN-aligned address |
| * greater than or equal to start address |
| */ |
| addi a3, t0, SZREG-1 |
| andi a3, a3, ~(SZREG-1) |
| beq a3, t0, 2f /* Skip if already aligned */ |
| /* Handle initial misalignment */ |
| sub a4, a3, t0 |
| 1: |
| sb a1, 0(t0) |
| addi t0, t0, 1 |
| bltu t0, a3, 1b |
| sub a2, a2, a4 /* Update count */ |
| |
| 2: /* Duff's device with 32 XLEN stores per iteration */ |
| /* Broadcast value into all bytes */ |
| andi a1, a1, 0xff |
| slli a3, a1, 8 |
| or a1, a3, a1 |
| slli a3, a1, 16 |
| or a1, a3, a1 |
| #ifdef CONFIG_64BIT |
| slli a3, a1, 32 |
| or a1, a3, a1 |
| #endif |
| |
| /* Calculate end address */ |
| andi a4, a2, ~(SZREG-1) |
| add a3, t0, a4 |
| |
| andi a4, a4, 31*SZREG /* Calculate remainder */ |
| beqz a4, 3f /* Shortcut if no remainder */ |
| neg a4, a4 |
| addi a4, a4, 32*SZREG /* Calculate initial offset */ |
| |
| /* Adjust start address with offset */ |
| sub t0, t0, a4 |
| |
| /* Jump into loop body */ |
| /* Assumes 32-bit instruction lengths */ |
| la a5, 3f |
| #ifdef CONFIG_64BIT |
| srli a4, a4, 1 |
| #endif |
| add a5, a5, a4 |
| jr a5 |
| 3: |
| REG_S a1, 0(t0) |
| REG_S a1, SZREG(t0) |
| REG_S a1, 2*SZREG(t0) |
| REG_S a1, 3*SZREG(t0) |
| REG_S a1, 4*SZREG(t0) |
| REG_S a1, 5*SZREG(t0) |
| REG_S a1, 6*SZREG(t0) |
| REG_S a1, 7*SZREG(t0) |
| REG_S a1, 8*SZREG(t0) |
| REG_S a1, 9*SZREG(t0) |
| REG_S a1, 10*SZREG(t0) |
| REG_S a1, 11*SZREG(t0) |
| REG_S a1, 12*SZREG(t0) |
| REG_S a1, 13*SZREG(t0) |
| REG_S a1, 14*SZREG(t0) |
| REG_S a1, 15*SZREG(t0) |
| REG_S a1, 16*SZREG(t0) |
| REG_S a1, 17*SZREG(t0) |
| REG_S a1, 18*SZREG(t0) |
| REG_S a1, 19*SZREG(t0) |
| REG_S a1, 20*SZREG(t0) |
| REG_S a1, 21*SZREG(t0) |
| REG_S a1, 22*SZREG(t0) |
| REG_S a1, 23*SZREG(t0) |
| REG_S a1, 24*SZREG(t0) |
| REG_S a1, 25*SZREG(t0) |
| REG_S a1, 26*SZREG(t0) |
| REG_S a1, 27*SZREG(t0) |
| REG_S a1, 28*SZREG(t0) |
| REG_S a1, 29*SZREG(t0) |
| REG_S a1, 30*SZREG(t0) |
| REG_S a1, 31*SZREG(t0) |
| addi t0, t0, 32*SZREG |
| bltu t0, a3, 3b |
| andi a2, a2, SZREG-1 /* Update count */ |
| |
| 4: |
| /* Handle trailing misalignment */ |
| beqz a2, 6f |
| add a3, t0, a2 |
| 5: |
| sb a1, 0(t0) |
| addi t0, t0, 1 |
| bltu t0, a3, 5b |
| 6: |
| ret |
| SYM_FUNC_END(__memset) |
| SYM_FUNC_ALIAS_WEAK(memset, __memset) |
| SYM_FUNC_ALIAS(__pi_memset, __memset) |
| SYM_FUNC_ALIAS(__pi___memset, __memset) |
