blob: e7008f614ad7935f6fab4a8658a1afbea0c443b2 [file] [log] [blame] [edit]
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# This test runs on Intel x86 based hardware which support the intel_pstate
# driver. The test checks the frequency settings from the maximum turbo
# state to the minimum supported frequency, in decrements of 100MHz. The
# test runs the aperf.c program to put load on each processor.
#
# The results are displayed in a table which indicate the "Target" state,
# or the requested frequency in MHz, the Actual frequency, as read from
# /proc/cpuinfo, the difference between the Target and Actual frequencies,
# and the value of MSR 0x199 (MSR_IA32_PERF_CTL) which indicates what
# pstate the cpu is in, and the value of
# /sys/devices/system/cpu/intel_pstate/max_perf_pct X maximum turbo state
#
# Notes: In some cases several frequency values may be placed in the
# /tmp/result.X files. This is done on purpose in order to catch cases
# where the pstate driver may not be working at all. There is the case
# where, for example, several "similar" frequencies are in the file:
#
#
#/tmp/result.3100:1:cpu MHz : 2899.980
#/tmp/result.3100:2:cpu MHz : 2900.000
#/tmp/result.3100:3:msr 0x199: 0x1e00
#/tmp/result.3100:4:max_perf_pct 94
#
# and the test will error out in those cases. The result.X file can be checked
# for consistency and modified to remove the extra MHz values. The result.X
# files can be re-evaluated by setting EVALUATE_ONLY to 1 below.
EVALUATE_ONLY=0
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
if ! uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ | grep -q x86; then
echo "$0 # Skipped: Test can only run on x86 architectures."
exit $ksft_skip
fi
msg="skip all tests:"
if [ $UID != 0 ] && [ $EVALUATE_ONLY == 0 ]; then
echo $msg please run this as root >&2
exit $ksft_skip
fi
max_cpus=$(($(nproc)-1))
function run_test () {
file_ext=$1
for cpu in `seq 0 $max_cpus`
do
echo "launching aperf load on $cpu"
./aperf $cpu &
done
echo "sleeping for 5 seconds"
sleep 5
grep MHz /proc/cpuinfo | sort -u > /tmp/result.freqs
num_freqs=$(wc -l /tmp/result.freqs | awk ' { print $1 } ')
if [ $num_freqs -ge 2 ]; then
tail -n 1 /tmp/result.freqs > /tmp/result.$1
else
cp /tmp/result.freqs /tmp/result.$1
fi
./msr 0 >> /tmp/result.$1
max_perf_pct=$(cat /sys/devices/system/cpu/intel_pstate/max_perf_pct)
echo "max_perf_pct $max_perf_pct" >> /tmp/result.$1
for job in `jobs -p`
do
echo "waiting for job id $job"
wait $job
done
}
#
# MAIN (ALL UNITS IN MHZ)
#
# Get the marketing frequency
_mkt_freq=$(cat /proc/cpuinfo | grep -m 1 "model name" | awk '{print $NF}')
_mkt_freq=$(echo $_mkt_freq | tr -d [:alpha:][:punct:])
mkt_freq=${_mkt_freq}0
# Get the ranges from cpupower
_min_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $1 } ')
min_freq=$(($_min_freq / 1000))
_max_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $2 } ')
max_freq=$(($_max_freq / 1000))
[ $EVALUATE_ONLY -eq 0 ] && for freq in `seq $max_freq -100 $min_freq`
do
echo "Setting maximum frequency to $freq"
cpupower frequency-set -g powersave --max=${freq}MHz >& /dev/null
run_test $freq
done
[ $EVALUATE_ONLY -eq 0 ] && cpupower frequency-set -g powersave --max=${max_freq}MHz >& /dev/null
echo "========================================================================"
echo "The marketing frequency of the cpu is $mkt_freq MHz"
echo "The maximum frequency of the cpu is $max_freq MHz"
echo "The minimum frequency of the cpu is $min_freq MHz"
# make a pretty table
echo "Target Actual Difference MSR(0x199) max_perf_pct" | tr " " "\n" > /tmp/result.tab
for freq in `seq $max_freq -100 $min_freq`
do
result_freq=$(cat /tmp/result.${freq} | grep "cpu MHz" | awk ' { print $4 } ' | awk -F "." ' { print $1 } ')
msr=$(cat /tmp/result.${freq} | grep "msr" | awk ' { print $3 } ')
max_perf_pct=$(cat /tmp/result.${freq} | grep "max_perf_pct" | awk ' { print $2 } ' )
cat >> /tmp/result.tab << EOF
$freq
$result_freq
$((result_freq - freq))
$msr
$((max_perf_pct * max_freq))
EOF
done
# print the table
pr -aTt -5 < /tmp/result.tab
exit 0