| # SPDX-License-Identifier: GPL-2.0-only |
| config SND_SOC_INTEL_SST_TOPLEVEL |
| bool "Intel ASoC SST drivers" |
| default y |
| depends on X86 || COMPILE_TEST |
| select SND_SOC_INTEL_MACH |
| help |
| Intel ASoC SST Platform Drivers. If you have a Intel machine that |
| has an audio controller with a DSP and I2S or DMIC port, then |
| enable this option by saying Y |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about Intel SST drivers. |
| |
| if SND_SOC_INTEL_SST_TOPLEVEL |
| |
| config SND_SST_IPC |
| tristate |
| # This option controls the IPC core for HiFi2 platforms |
| |
| config SND_SST_IPC_PCI |
| tristate |
| select SND_SST_IPC |
| # This option controls the PCI-based IPC for HiFi2 platforms |
| # (Medfield, Merrifield). |
| |
| config SND_SST_IPC_ACPI |
| tristate |
| select SND_SST_IPC |
| # This option controls the ACPI-based IPC for HiFi2 platforms |
| # (Baytrail, Cherrytrail) |
| |
| config SND_SOC_INTEL_SST_ACPI |
| tristate |
| # This option controls ACPI-based probing on |
| # Haswell/Broadwell/Baytrail legacy and will be set |
| # when these platforms are enabled |
| |
| config SND_SOC_INTEL_SST |
| tristate |
| |
| config SND_SOC_INTEL_SST_FIRMWARE |
| tristate |
| select DW_DMAC_CORE |
| # This option controls firmware download on |
| # Haswell/Broadwell/Baytrail legacy and will be set |
| # when these platforms are enabled |
| |
| config SND_SOC_INTEL_HASWELL |
| tristate "Haswell/Broadwell Platforms" |
| depends on SND_DMA_SGBUF |
| depends on DMADEVICES && ACPI |
| select SND_SOC_INTEL_SST |
| select SND_SOC_INTEL_SST_ACPI |
| select SND_SOC_INTEL_SST_FIRMWARE |
| select SND_SOC_ACPI_INTEL_MATCH |
| help |
| If you have a Intel Haswell or Broadwell platform connected to |
| an I2S codec, then enable this option by saying Y or m. This is |
| typically used for Chromebooks. This is a recommended option. |
| |
| config SND_SOC_INTEL_BAYTRAIL |
| tristate "Baytrail (legacy) Platforms" |
| depends on DMADEVICES && ACPI && SND_SST_ATOM_HIFI2_PLATFORM=n |
| select SND_SOC_INTEL_SST |
| select SND_SOC_INTEL_SST_ACPI |
| select SND_SOC_INTEL_SST_FIRMWARE |
| select SND_SOC_ACPI_INTEL_MATCH |
| help |
| If you have a Intel Baytrail platform connected to an I2S codec, |
| then enable this option by saying Y or m. This was typically used |
| for Baytrail Chromebooks but this option is now deprecated and is |
| not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead. |
| |
| config SND_SST_ATOM_HIFI2_PLATFORM |
| tristate |
| select SND_SOC_COMPRESS |
| |
| config SND_SST_ATOM_HIFI2_PLATFORM_PCI |
| tristate "PCI HiFi2 (Merrifield) Platforms" |
| depends on X86 && PCI |
| select SND_SST_IPC_PCI |
| select SND_SST_ATOM_HIFI2_PLATFORM |
| help |
| If you have a Intel Merrifield/Edison platform, then |
| enable this option by saying Y or m. Distros will typically not |
| enable this option: while Merrifield/Edison can run a mainline |
| kernel with limited functionality it will require a firmware file |
| which is not in the standard firmware tree |
| |
| config SND_SST_ATOM_HIFI2_PLATFORM_ACPI |
| tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms" |
| default ACPI |
| depends on X86 && ACPI && PCI |
| select SND_SST_IPC_ACPI |
| select SND_SST_ATOM_HIFI2_PLATFORM |
| select SND_SOC_ACPI_INTEL_MATCH |
| select IOSF_MBI |
| help |
| If you have a Intel Baytrail or Cherrytrail platform with an I2S |
| codec, then enable this option by saying Y or m. This is a |
| recommended option |
| |
| config SND_SOC_INTEL_SKYLAKE |
| tristate "All Skylake/SST Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKL |
| select SND_SOC_INTEL_APL |
| select SND_SOC_INTEL_KBL |
| select SND_SOC_INTEL_GLK |
| select SND_SOC_INTEL_CNL |
| select SND_SOC_INTEL_CFL |
| help |
| This is a backwards-compatible option to select all devices |
| supported by the Intel SST/Skylake driver. This option is no |
| longer recommended and will be deprecated when the SOF |
| driver is introduced. Distributions should explicitly |
| select which platform uses this driver. |
| |
| config SND_SOC_INTEL_SKL |
| tristate "Skylake Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel Skylake platform with the DSP enabled |
| in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_APL |
| tristate "Broxton/ApolloLake Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel Broxton/ApolloLake platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_KBL |
| tristate "Kabylake Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel Kabylake platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_GLK |
| tristate "GeminiLake Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel GeminiLake platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_CNL |
| tristate "CannonLake/WhiskyLake Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel CNL/WHL platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_CFL |
| tristate "CoffeeLake Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel CoffeeLake platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_CML_H |
| tristate "CometLake-H Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel CometLake-H platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_CML_LP |
| tristate "CometLake-LP Platforms" |
| depends on PCI && ACPI |
| depends on COMMON_CLK |
| select SND_SOC_INTEL_SKYLAKE_FAMILY |
| help |
| If you have a Intel CometLake-LP platform with the DSP |
| enabled in the BIOS then enable this option by saying Y or m. |
| |
| config SND_SOC_INTEL_SKYLAKE_FAMILY |
| tristate |
| select SND_SOC_INTEL_SKYLAKE_COMMON |
| |
| if SND_SOC_INTEL_SKYLAKE_FAMILY |
| |
| config SND_SOC_INTEL_SKYLAKE_SSP_CLK |
| tristate |
| |
| config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC |
| bool "HDAudio codec support" |
| help |
| If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/ |
| GeminiLake or CannonLake platform with an HDaudio codec |
| then enable this option by saying Y |
| |
| config SND_SOC_INTEL_SKYLAKE_COMMON |
| tristate |
| select SND_HDA_EXT_CORE |
| select SND_HDA_DSP_LOADER |
| select SND_SOC_TOPOLOGY |
| select SND_SOC_INTEL_SST |
| select SND_SOC_HDAC_HDA if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC |
| select SND_SOC_ACPI_INTEL_MATCH |
| select SND_INTEL_NHLT if ACPI |
| help |
| If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/ |
| GeminiLake or CannonLake platform with the DSP enabled in the BIOS |
| then enable this option by saying Y or m. |
| |
| endif ## SND_SOC_INTEL_SKYLAKE_FAMILY |
| |
| endif ## SND_SOC_INTEL_SST_TOPLEVEL |
| |
| if SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL |
| |
| config SND_SOC_ACPI_INTEL_MATCH |
| tristate |
| select SND_SOC_ACPI if ACPI |
| # this option controls the compilation of ACPI matching tables and |
| # helpers and is not meant to be selected by the user. |
| |
| endif ## SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL |
| |
| |
| # ASoC codec drivers |
| source "sound/soc/intel/boards/Kconfig" |
