drivers/staging/brcm80211/include/brcmu_wifi.h - linux - Git at Google

 /*
  * Copyright (c) 2010 Broadcom Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #ifndef	_BRCMU_WIFI_H_
 #define	_BRCMU_WIFI_H_

 #include <linux/if_ether.h>		/* for ETH_ALEN */
 #include <linux/ieee80211.h>		/* for WLAN_PMKID_LEN */

 /* A chanspec holds the channel number, band, bandwidth and control sideband */
 typedef u16 chanspec_t;

 /* channel defines */
 #define CH_UPPER_SB			0x01
 #define CH_LOWER_SB			0x02
 #define CH_EWA_VALID			0x04
 #define CH_20MHZ_APART			4
 #define CH_10MHZ_APART			2
 #define CH_5MHZ_APART			1	/* 2G band channels are 5 Mhz apart */
 #define CH_MAX_2G_CHANNEL		14	/* Max channel in 2G band */
 #define BRCM_MAX_2G_CHANNEL	CH_MAX_2G_CHANNEL	/* legacy define */
 #define	MAXCHANNEL		224	/* max # supported channels. The max channel no is 216,
 					 * this is that + 1 rounded up to a multiple of NBBY (8).
 					 * DO NOT MAKE it > 255: channels are u8's all over
 					 */

 #define WL_CHANSPEC_CHAN_MASK		0x00ff
 #define WL_CHANSPEC_CHAN_SHIFT		0

 #define WL_CHANSPEC_CTL_SB_MASK		0x0300
 #define WL_CHANSPEC_CTL_SB_SHIFT	     8
 #define WL_CHANSPEC_CTL_SB_LOWER	0x0100
 #define WL_CHANSPEC_CTL_SB_UPPER	0x0200
 #define WL_CHANSPEC_CTL_SB_NONE		0x0300

 #define WL_CHANSPEC_BW_MASK		0x0C00
 #define WL_CHANSPEC_BW_SHIFT		    10
 #define WL_CHANSPEC_BW_10		0x0400
 #define WL_CHANSPEC_BW_20		0x0800
 #define WL_CHANSPEC_BW_40		0x0C00

 #define WL_CHANSPEC_BAND_MASK		0xf000
 #define WL_CHANSPEC_BAND_SHIFT		12
 #define WL_CHANSPEC_BAND_5G		0x1000
 #define WL_CHANSPEC_BAND_2G		0x2000
 #define INVCHANSPEC			255

 /* used to calculate the chan_freq = chan_factor * 500Mhz + 5 * chan_number */
 #define WF_CHAN_FACTOR_2_4_G		4814	/* 2.4 GHz band, 2407 MHz */
 #define WF_CHAN_FACTOR_5_G		10000	/* 5   GHz band, 5000 MHz */
 #define WF_CHAN_FACTOR_4_G		8000	/* 4.9 GHz band for Japan */

 /* channel defines */
 #define LOWER_20_SB(channel)	(((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0)
 #define UPPER_20_SB(channel)	(((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \
 				((channel) + CH_10MHZ_APART) : 0)
 #define CHSPEC_BANDUNIT(chspec)	(CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : \
 						       BAND_2G_INDEX)
 #define CH20MHZ_CHSPEC(channel)	(chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \
 				WL_CHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \
 				WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G))
 #define NEXT_20MHZ_CHAN(channel)	(((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \
 					((channel) + CH_20MHZ_APART) : 0)
 #define CH40MHZ_CHSPEC(channel, ctlsb)	(chanspec_t) \
 					((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \
 					((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \
 					WL_CHANSPEC_BAND_5G))
 #define CHSPEC_CHANNEL(chspec)	((u8)((chspec) & WL_CHANSPEC_CHAN_MASK))
 #define CHSPEC_BAND(chspec)	((chspec) & WL_CHANSPEC_BAND_MASK)

 #ifdef WL11N_20MHZONLY

 #define CHSPEC_CTL_SB(chspec)	WL_CHANSPEC_CTL_SB_NONE
 #define CHSPEC_BW(chspec)	WL_CHANSPEC_BW_20
 #define CHSPEC_IS10(chspec)	0
 #define CHSPEC_IS20(chspec)	1
 #ifndef CHSPEC_IS40
 #define CHSPEC_IS40(chspec)	0
 #endif

 #else				/* !WL11N_20MHZONLY */

 #define CHSPEC_CTL_SB(chspec)	((chspec) & WL_CHANSPEC_CTL_SB_MASK)
 #define CHSPEC_BW(chspec)	((chspec) & WL_CHANSPEC_BW_MASK)
 #define CHSPEC_IS10(chspec)	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10)
 #define CHSPEC_IS20(chspec)	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
 #ifndef CHSPEC_IS40
 #define CHSPEC_IS40(chspec)	(((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
 #endif

 #endif				/* !WL11N_20MHZONLY */

 #define CHSPEC_IS5G(chspec)	(((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)
 #define CHSPEC_IS2G(chspec)	(((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G)
 #define CHSPEC_SB_NONE(chspec)	(((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE)
 #define CHSPEC_SB_UPPER(chspec)	(((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER)
 #define CHSPEC_SB_LOWER(chspec)	(((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER)
 #define CHSPEC_CTL_CHAN(chspec)  ((CHSPEC_SB_LOWER(chspec)) ? \
 				  (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \
 				  (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))))
 #define CHSPEC2BAND(chspec) (CHSPEC_IS5G(chspec) ? BRCM_BAND_5G : BRCM_BAND_2G)

 #define CHANSPEC_STR_LEN    8

 /* defined rate in 500kbps */
 #define BRCM_MAXRATE	108	/* in 500kbps units */
 #define BRCM_RATE_1M	2	/* in 500kbps units */
 #define BRCM_RATE_2M	4	/* in 500kbps units */
 #define BRCM_RATE_5M5	11	/* in 500kbps units */
 #define BRCM_RATE_11M	22	/* in 500kbps units */
 #define BRCM_RATE_6M	12	/* in 500kbps units */
 #define BRCM_RATE_9M	18	/* in 500kbps units */
 #define BRCM_RATE_12M	24	/* in 500kbps units */
 #define BRCM_RATE_18M	36	/* in 500kbps units */
 #define BRCM_RATE_24M	48	/* in 500kbps units */
 #define BRCM_RATE_36M	72	/* in 500kbps units */
 #define BRCM_RATE_48M	96	/* in 500kbps units */
 #define BRCM_RATE_54M	108	/* in 500kbps units */

 #define BRCM_2G_25MHZ_OFFSET		5	/* 2.4GHz band channel offset */

 #define MCSSET_LEN	16

 #define AC_BITMAP_TST(ab, ac)	(((ab) & (1 << (ac))) != 0)

 /*
  * Verify the chanspec is using a legal set of parameters, i.e. that the
  * chanspec specified a band, bw, ctl_sb and channel and that the
  * combination could be legal given any set of circumstances.
  * RETURNS: true is the chanspec is malformed, false if it looks good.
  */
 extern bool brcmu_chspec_malformed(chanspec_t chanspec);

 /*
  * This function returns the channel number that control traffic is being sent on, for legacy
  * channels this is just the channel number, for 40MHZ channels it is the upper or lowre 20MHZ
  * sideband depending on the chanspec selected
  */
 extern u8 brcmu_chspec_ctlchan(chanspec_t chspec);

 /*
  * Return the channel number for a given frequency and base frequency.
  * The returned channel number is relative to the given base frequency.
  * If the given base frequency is zero, a base frequency of 5 GHz is assumed for
  * frequencies from 5 - 6 GHz, and 2.407 GHz is assumed for 2.4 - 2.5 GHz.
  *
  * Frequency is specified in MHz.
  * The base frequency is specified as (start_factor * 500 kHz).
  * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for
  * 2.4 GHz and 5 GHz bands.
  *
  * The returned channel will be in the range [1, 14] in the 2.4 GHz band
  * and [0, 200] otherwise.
  * -1 is returned if the start_factor is WF_CHAN_FACTOR_2_4_G and the
  * frequency is not a 2.4 GHz channel, or if the frequency is not and even
  * multiple of 5 MHz from the base frequency to the base plus 1 GHz.
  *
  * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2
  */
 extern int brcmu_mhz2channel(uint freq, uint start_factor);

 /* Enumerate crypto algorithms */
 #define	CRYPTO_ALGO_OFF			0
 #define	CRYPTO_ALGO_WEP1		1
 #define	CRYPTO_ALGO_TKIP		2
 #define	CRYPTO_ALGO_WEP128		3
 #define CRYPTO_ALGO_AES_CCM		4
 #define CRYPTO_ALGO_AES_RESERVED1	5
 #define CRYPTO_ALGO_AES_RESERVED2	6
 #define CRYPTO_ALGO_NALG		7

 /* wireless security bitvec */
 #define WEP_ENABLED		0x0001
 #define TKIP_ENABLED		0x0002
 #define AES_ENABLED		0x0004
 #define WSEC_SWFLAG		0x0008
 #define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */

 /* WPA authentication mode bitvec */
 #define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
 #define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
 #define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
 #define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
 #define WPA_AUTH_RESERVED1	0x0008
 #define WPA_AUTH_RESERVED2	0x0010
 					/* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */
 #define WPA2_AUTH_RESERVED1	0x0020
 #define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
 #define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
 #define WPA2_AUTH_RESERVED3	0x0200
 #define WPA2_AUTH_RESERVED4	0x0400
 #define WPA2_AUTH_RESERVED5	0x0800

 /* pmkid */
 #define	MAXPMKID		16

 #define DOT11_DEFAULT_RTS_LEN		2347
 #define DOT11_DEFAULT_FRAG_LEN		2346

 #define DOT11_ICV_AES_LEN		8
 #define DOT11_QOS_LEN			2
 #define DOT11_IV_MAX_LEN		8
 #define DOT11_A4_HDR_LEN		30

 #define HT_CAP_RX_STBC_NO		0x0
 #define HT_CAP_RX_STBC_ONE_STREAM	0x1

 typedef struct _pmkid {
 	u8 BSSID[ETH_ALEN];
 	u8 PMKID[WLAN_PMKID_LEN];
 } pmkid_t;

 typedef struct _pmkid_list {
 	u32 npmkid;
 	pmkid_t pmkid[1];
 } pmkid_list_t;

 typedef struct _pmkid_cand {
 	u8 BSSID[ETH_ALEN];
 	u8 preauth;
 } pmkid_cand_t;

 typedef struct _pmkid_cand_list {
 	u32 npmkid_cand;
 	pmkid_cand_t pmkid_cand[1];
 } pmkid_cand_list_t;

 typedef u8 ac_bitmap_t;

 #endif				/* _BRCMU_WIFI_H_ */
	/*
	* Copyright (c) 2010 Broadcom Corporation
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
	* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
	* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
	* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#ifndef _BRCMU_WIFI_H_
	#define _BRCMU_WIFI_H_

	#include <linux/if_ether.h> /* for ETH_ALEN */
	#include <linux/ieee80211.h> /* for WLAN_PMKID_LEN */

	/* A chanspec holds the channel number, band, bandwidth and control sideband */
	typedef u16 chanspec_t;

	/* channel defines */
	#define CH_UPPER_SB 0x01
	#define CH_LOWER_SB 0x02
	#define CH_EWA_VALID 0x04
	#define CH_20MHZ_APART 4
	#define CH_10MHZ_APART 2
	#define CH_5MHZ_APART 1 /* 2G band channels are 5 Mhz apart */
	#define CH_MAX_2G_CHANNEL 14 /* Max channel in 2G band */
	#define BRCM_MAX_2G_CHANNEL CH_MAX_2G_CHANNEL /* legacy define */
	#define MAXCHANNEL 224 /* max # supported channels. The max channel no is 216,
	* this is that + 1 rounded up to a multiple of NBBY (8).
	* DO NOT MAKE it > 255: channels are u8's all over
	*/

	#define WL_CHANSPEC_CHAN_MASK 0x00ff
	#define WL_CHANSPEC_CHAN_SHIFT 0

	#define WL_CHANSPEC_CTL_SB_MASK 0x0300
	#define WL_CHANSPEC_CTL_SB_SHIFT 8
	#define WL_CHANSPEC_CTL_SB_LOWER 0x0100
	#define WL_CHANSPEC_CTL_SB_UPPER 0x0200
	#define WL_CHANSPEC_CTL_SB_NONE 0x0300

	#define WL_CHANSPEC_BW_MASK 0x0C00
	#define WL_CHANSPEC_BW_SHIFT 10
	#define WL_CHANSPEC_BW_10 0x0400
	#define WL_CHANSPEC_BW_20 0x0800
	#define WL_CHANSPEC_BW_40 0x0C00

	#define WL_CHANSPEC_BAND_MASK 0xf000
	#define WL_CHANSPEC_BAND_SHIFT 12
	#define WL_CHANSPEC_BAND_5G 0x1000
	#define WL_CHANSPEC_BAND_2G 0x2000
	#define INVCHANSPEC 255

	/* used to calculate the chan_freq = chan_factor * 500Mhz + 5 * chan_number */
	#define WF_CHAN_FACTOR_2_4_G 4814 /* 2.4 GHz band, 2407 MHz */
	#define WF_CHAN_FACTOR_5_G 10000 /* 5 GHz band, 5000 MHz */
	#define WF_CHAN_FACTOR_4_G 8000 /* 4.9 GHz band for Japan */

	/* channel defines */
	#define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0)
	#define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \
	((channel) + CH_10MHZ_APART) : 0)
	#define CHSPEC_BANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : \
	BAND_2G_INDEX)
	#define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) \| WL_CHANSPEC_BW_20 \| \
	WL_CHANSPEC_CTL_SB_NONE \| (((channel) <= CH_MAX_2G_CHANNEL) ? \
	WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G))
	#define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \
	((channel) + CH_20MHZ_APART) : 0)
	#define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \
	((channel) \| (ctlsb) \| WL_CHANSPEC_BW_40 \| \
	((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \
	WL_CHANSPEC_BAND_5G))
	#define CHSPEC_CHANNEL(chspec) ((u8)((chspec) & WL_CHANSPEC_CHAN_MASK))
	#define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK)

	#ifdef WL11N_20MHZONLY

	#define CHSPEC_CTL_SB(chspec) WL_CHANSPEC_CTL_SB_NONE
	#define CHSPEC_BW(chspec) WL_CHANSPEC_BW_20
	#define CHSPEC_IS10(chspec) 0
	#define CHSPEC_IS20(chspec) 1
	#ifndef CHSPEC_IS40
	#define CHSPEC_IS40(chspec) 0
	#endif

	#else /* !WL11N_20MHZONLY */

	#define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK)
	#define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK)
	#define CHSPEC_IS10(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10)
	#define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
	#ifndef CHSPEC_IS40
	#define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
	#endif

	#endif /* !WL11N_20MHZONLY */

	#define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)
	#define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G)
	#define CHSPEC_SB_NONE(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE)
	#define CHSPEC_SB_UPPER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER)
	#define CHSPEC_SB_LOWER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER)
	#define CHSPEC_CTL_CHAN(chspec) ((CHSPEC_SB_LOWER(chspec)) ? \
	(LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \
	(UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))))
	#define CHSPEC2BAND(chspec) (CHSPEC_IS5G(chspec) ? BRCM_BAND_5G : BRCM_BAND_2G)

	#define CHANSPEC_STR_LEN 8

	/* defined rate in 500kbps */
	#define BRCM_MAXRATE 108 /* in 500kbps units */
	#define BRCM_RATE_1M 2 /* in 500kbps units */
	#define BRCM_RATE_2M 4 /* in 500kbps units */
	#define BRCM_RATE_5M5 11 /* in 500kbps units */
	#define BRCM_RATE_11M 22 /* in 500kbps units */
	#define BRCM_RATE_6M 12 /* in 500kbps units */
	#define BRCM_RATE_9M 18 /* in 500kbps units */
	#define BRCM_RATE_12M 24 /* in 500kbps units */
	#define BRCM_RATE_18M 36 /* in 500kbps units */
	#define BRCM_RATE_24M 48 /* in 500kbps units */
	#define BRCM_RATE_36M 72 /* in 500kbps units */
	#define BRCM_RATE_48M 96 /* in 500kbps units */
	#define BRCM_RATE_54M 108 /* in 500kbps units */

	#define BRCM_2G_25MHZ_OFFSET 5 /* 2.4GHz band channel offset */

	#define MCSSET_LEN 16

	#define AC_BITMAP_TST(ab, ac) (((ab) & (1 << (ac))) != 0)

	/*
	* Verify the chanspec is using a legal set of parameters, i.e. that the
	* chanspec specified a band, bw, ctl_sb and channel and that the
	* combination could be legal given any set of circumstances.
	* RETURNS: true is the chanspec is malformed, false if it looks good.
	*/
	extern bool brcmu_chspec_malformed(chanspec_t chanspec);

	/*
	* This function returns the channel number that control traffic is being sent on, for legacy
	* channels this is just the channel number, for 40MHZ channels it is the upper or lowre 20MHZ
	* sideband depending on the chanspec selected
	*/
	extern u8 brcmu_chspec_ctlchan(chanspec_t chspec);

	/*
	* Return the channel number for a given frequency and base frequency.
	* The returned channel number is relative to the given base frequency.
	* If the given base frequency is zero, a base frequency of 5 GHz is assumed for
	* frequencies from 5 - 6 GHz, and 2.407 GHz is assumed for 2.4 - 2.5 GHz.
	*
	* Frequency is specified in MHz.
	* The base frequency is specified as (start_factor * 500 kHz).
	* Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for
	* 2.4 GHz and 5 GHz bands.
	*
	* The returned channel will be in the range [1, 14] in the 2.4 GHz band
	* and [0, 200] otherwise.
	* -1 is returned if the start_factor is WF_CHAN_FACTOR_2_4_G and the
	* frequency is not a 2.4 GHz channel, or if the frequency is not and even
	* multiple of 5 MHz from the base frequency to the base plus 1 GHz.
	*
	* Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2
	*/
	extern int brcmu_mhz2channel(uint freq, uint start_factor);

	/* Enumerate crypto algorithms */
	#define CRYPTO_ALGO_OFF 0
	#define CRYPTO_ALGO_WEP1 1
	#define CRYPTO_ALGO_TKIP 2
	#define CRYPTO_ALGO_WEP128 3
	#define CRYPTO_ALGO_AES_CCM 4
	#define CRYPTO_ALGO_AES_RESERVED1 5
	#define CRYPTO_ALGO_AES_RESERVED2 6
	#define CRYPTO_ALGO_NALG 7

	/* wireless security bitvec */
	#define WEP_ENABLED 0x0001
	#define TKIP_ENABLED 0x0002
	#define AES_ENABLED 0x0004
	#define WSEC_SWFLAG 0x0008
	#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */

	/* WPA authentication mode bitvec */
	#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
	#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
	#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
	#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
	#define WPA_AUTH_RESERVED1 0x0008
	#define WPA_AUTH_RESERVED2 0x0010
	/* #define WPA_AUTH_8021X 0x0020 // 802.1x, reserved */
	#define WPA2_AUTH_RESERVED1 0x0020
	#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
	#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
	#define WPA2_AUTH_RESERVED3 0x0200
	#define WPA2_AUTH_RESERVED4 0x0400
	#define WPA2_AUTH_RESERVED5 0x0800

	/* pmkid */
	#define MAXPMKID 16

	#define DOT11_DEFAULT_RTS_LEN 2347
	#define DOT11_DEFAULT_FRAG_LEN 2346

	#define DOT11_ICV_AES_LEN 8
	#define DOT11_QOS_LEN 2
	#define DOT11_IV_MAX_LEN 8
	#define DOT11_A4_HDR_LEN 30

	#define HT_CAP_RX_STBC_NO 0x0
	#define HT_CAP_RX_STBC_ONE_STREAM 0x1

	typedef struct _pmkid {
	u8 BSSID[ETH_ALEN];
	u8 PMKID[WLAN_PMKID_LEN];
	} pmkid_t;

	typedef struct _pmkid_list {
	u32 npmkid;
	pmkid_t pmkid[1];
	} pmkid_list_t;

	typedef struct _pmkid_cand {
	u8 BSSID[ETH_ALEN];
	u8 preauth;
	} pmkid_cand_t;

	typedef struct _pmkid_cand_list {
	u32 npmkid_cand;
	pmkid_cand_t pmkid_cand[1];
	} pmkid_cand_list_t;

	typedef u8 ac_bitmap_t;

	#endif /* _BRCMU_WIFI_H_ */