| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2017 Sanechips Technology Co., Ltd. |
| * Copyright 2017 Linaro Ltd. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| #define ZX_PWM_MODE 0x0 |
| #define ZX_PWM_CLKDIV_SHIFT 2 |
| #define ZX_PWM_CLKDIV_MASK GENMASK(11, 2) |
| #define ZX_PWM_CLKDIV(x) (((x) << ZX_PWM_CLKDIV_SHIFT) & \ |
| ZX_PWM_CLKDIV_MASK) |
| #define ZX_PWM_POLAR BIT(1) |
| #define ZX_PWM_EN BIT(0) |
| #define ZX_PWM_PERIOD 0x4 |
| #define ZX_PWM_DUTY 0x8 |
| |
| #define ZX_PWM_CLKDIV_MAX 1023 |
| #define ZX_PWM_PERIOD_MAX 65535 |
| |
| struct zx_pwm_chip { |
| struct pwm_chip chip; |
| struct clk *pclk; |
| struct clk *wclk; |
| void __iomem *base; |
| }; |
| |
| static inline struct zx_pwm_chip *to_zx_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct zx_pwm_chip, chip); |
| } |
| |
| static inline u32 zx_pwm_readl(struct zx_pwm_chip *zpc, unsigned int hwpwm, |
| unsigned int offset) |
| { |
| return readl(zpc->base + (hwpwm + 1) * 0x10 + offset); |
| } |
| |
| static inline void zx_pwm_writel(struct zx_pwm_chip *zpc, unsigned int hwpwm, |
| unsigned int offset, u32 value) |
| { |
| writel(value, zpc->base + (hwpwm + 1) * 0x10 + offset); |
| } |
| |
| static void zx_pwm_set_mask(struct zx_pwm_chip *zpc, unsigned int hwpwm, |
| unsigned int offset, u32 mask, u32 value) |
| { |
| u32 data; |
| |
| data = zx_pwm_readl(zpc, hwpwm, offset); |
| data &= ~mask; |
| data |= value & mask; |
| zx_pwm_writel(zpc, hwpwm, offset, data); |
| } |
| |
| static void zx_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip); |
| unsigned long rate; |
| unsigned int div; |
| u32 value; |
| u64 tmp; |
| |
| value = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_MODE); |
| |
| if (value & ZX_PWM_POLAR) |
| state->polarity = PWM_POLARITY_NORMAL; |
| else |
| state->polarity = PWM_POLARITY_INVERSED; |
| |
| if (value & ZX_PWM_EN) |
| state->enabled = true; |
| else |
| state->enabled = false; |
| |
| div = (value & ZX_PWM_CLKDIV_MASK) >> ZX_PWM_CLKDIV_SHIFT; |
| rate = clk_get_rate(zpc->wclk); |
| |
| tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_PERIOD); |
| tmp *= div * NSEC_PER_SEC; |
| state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate); |
| |
| tmp = zx_pwm_readl(zpc, pwm->hwpwm, ZX_PWM_DUTY); |
| tmp *= div * NSEC_PER_SEC; |
| state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate); |
| } |
| |
| static int zx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| unsigned int duty_ns, unsigned int period_ns) |
| { |
| struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip); |
| unsigned int period_cycles, duty_cycles; |
| unsigned long long c; |
| unsigned int div = 1; |
| unsigned long rate; |
| |
| /* Find out the best divider */ |
| rate = clk_get_rate(zpc->wclk); |
| |
| while (1) { |
| c = rate / div; |
| c = c * period_ns; |
| do_div(c, NSEC_PER_SEC); |
| |
| if (c < ZX_PWM_PERIOD_MAX) |
| break; |
| |
| div++; |
| |
| if (div > ZX_PWM_CLKDIV_MAX) |
| return -ERANGE; |
| } |
| |
| /* Calculate duty cycles */ |
| period_cycles = c; |
| c *= duty_ns; |
| do_div(c, period_ns); |
| duty_cycles = c; |
| |
| /* |
| * If the PWM is being enabled, we have to temporarily disable it |
| * before configuring the registers. |
| */ |
| if (pwm_is_enabled(pwm)) |
| zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_EN, 0); |
| |
| /* Set up registers */ |
| zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_CLKDIV_MASK, |
| ZX_PWM_CLKDIV(div)); |
| zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_PERIOD, period_cycles); |
| zx_pwm_writel(zpc, pwm->hwpwm, ZX_PWM_DUTY, duty_cycles); |
| |
| /* Re-enable the PWM if needed */ |
| if (pwm_is_enabled(pwm)) |
| zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, |
| ZX_PWM_EN, ZX_PWM_EN); |
| |
| return 0; |
| } |
| |
| static int zx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct zx_pwm_chip *zpc = to_zx_pwm_chip(chip); |
| struct pwm_state cstate; |
| int ret; |
| |
| pwm_get_state(pwm, &cstate); |
| |
| if (state->polarity != cstate.polarity) |
| zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, ZX_PWM_POLAR, |
| (state->polarity == PWM_POLARITY_INVERSED) ? |
| 0 : ZX_PWM_POLAR); |
| |
| if (state->period != cstate.period || |
| state->duty_cycle != cstate.duty_cycle) { |
| ret = zx_pwm_config(chip, pwm, state->duty_cycle, |
| state->period); |
| if (ret) |
| return ret; |
| } |
| |
| if (state->enabled != cstate.enabled) { |
| if (state->enabled) { |
| ret = clk_prepare_enable(zpc->wclk); |
| if (ret) |
| return ret; |
| |
| zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, |
| ZX_PWM_EN, ZX_PWM_EN); |
| } else { |
| zx_pwm_set_mask(zpc, pwm->hwpwm, ZX_PWM_MODE, |
| ZX_PWM_EN, 0); |
| clk_disable_unprepare(zpc->wclk); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops zx_pwm_ops = { |
| .apply = zx_pwm_apply, |
| .get_state = zx_pwm_get_state, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int zx_pwm_probe(struct platform_device *pdev) |
| { |
| struct zx_pwm_chip *zpc; |
| struct resource *res; |
| unsigned int i; |
| int ret; |
| |
| zpc = devm_kzalloc(&pdev->dev, sizeof(*zpc), GFP_KERNEL); |
| if (!zpc) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| zpc->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(zpc->base)) |
| return PTR_ERR(zpc->base); |
| |
| zpc->pclk = devm_clk_get(&pdev->dev, "pclk"); |
| if (IS_ERR(zpc->pclk)) |
| return PTR_ERR(zpc->pclk); |
| |
| zpc->wclk = devm_clk_get(&pdev->dev, "wclk"); |
| if (IS_ERR(zpc->wclk)) |
| return PTR_ERR(zpc->wclk); |
| |
| ret = clk_prepare_enable(zpc->pclk); |
| if (ret) |
| return ret; |
| |
| zpc->chip.dev = &pdev->dev; |
| zpc->chip.ops = &zx_pwm_ops; |
| zpc->chip.base = -1; |
| zpc->chip.npwm = 4; |
| zpc->chip.of_xlate = of_pwm_xlate_with_flags; |
| zpc->chip.of_pwm_n_cells = 3; |
| |
| /* |
| * PWM devices may be enabled by firmware, and let's disable all of |
| * them initially to save power. |
| */ |
| for (i = 0; i < zpc->chip.npwm; i++) |
| zx_pwm_set_mask(zpc, i, ZX_PWM_MODE, ZX_PWM_EN, 0); |
| |
| ret = pwmchip_add(&zpc->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, zpc); |
| |
| return 0; |
| } |
| |
| static int zx_pwm_remove(struct platform_device *pdev) |
| { |
| struct zx_pwm_chip *zpc = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = pwmchip_remove(&zpc->chip); |
| clk_disable_unprepare(zpc->pclk); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id zx_pwm_dt_ids[] = { |
| { .compatible = "zte,zx296718-pwm", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, zx_pwm_dt_ids); |
| |
| static struct platform_driver zx_pwm_driver = { |
| .driver = { |
| .name = "zx-pwm", |
| .of_match_table = zx_pwm_dt_ids, |
| }, |
| .probe = zx_pwm_probe, |
| .remove = zx_pwm_remove, |
| }; |
| module_platform_driver(zx_pwm_driver); |
| |
| MODULE_ALIAS("platform:zx-pwm"); |
| MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); |
| MODULE_DESCRIPTION("ZTE ZX PWM Driver"); |
| MODULE_LICENSE("GPL v2"); |