| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) ST-Ericsson AB 2010 |
| * Author: Daniel Martensson |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/string.h> |
| #include <linux/workqueue.h> |
| #include <linux/completion.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/debugfs.h> |
| #include <linux/if_arp.h> |
| #include <net/caif/caif_layer.h> |
| #include <net/caif/caif_spi.h> |
| |
| #ifndef CONFIG_CAIF_SPI_SYNC |
| #define FLAVOR "Flavour: Vanilla.\n" |
| #else |
| #define FLAVOR "Flavour: Master CMD&LEN at start.\n" |
| #endif /* CONFIG_CAIF_SPI_SYNC */ |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Daniel Martensson"); |
| MODULE_DESCRIPTION("CAIF SPI driver"); |
| |
| /* Returns the number of padding bytes for alignment. */ |
| #define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1))))) |
| |
| static bool spi_loop; |
| module_param(spi_loop, bool, 0444); |
| MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode."); |
| |
| /* SPI frame alignment. */ |
| module_param(spi_frm_align, int, 0444); |
| MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment."); |
| |
| /* |
| * SPI padding options. |
| * Warning: must be a base of 2 (& operation used) and can not be zero ! |
| */ |
| module_param(spi_up_head_align, int, 0444); |
| MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment."); |
| |
| module_param(spi_up_tail_align, int, 0444); |
| MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment."); |
| |
| module_param(spi_down_head_align, int, 0444); |
| MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment."); |
| |
| module_param(spi_down_tail_align, int, 0444); |
| MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment."); |
| |
| #ifdef CONFIG_ARM |
| #define BYTE_HEX_FMT "%02X" |
| #else |
| #define BYTE_HEX_FMT "%02hhX" |
| #endif |
| |
| #define SPI_MAX_PAYLOAD_SIZE 4096 |
| /* |
| * Threshold values for the SPI packet queue. Flowcontrol will be asserted |
| * when the number of packets exceeds HIGH_WATER_MARK. It will not be |
| * deasserted before the number of packets drops below LOW_WATER_MARK. |
| */ |
| #define LOW_WATER_MARK 100 |
| #define HIGH_WATER_MARK (LOW_WATER_MARK*5) |
| |
| #ifndef CONFIG_HAS_DMA |
| |
| /* |
| * We sometimes use UML for debugging, but it cannot handle |
| * dma_alloc_coherent so we have to wrap it. |
| */ |
| static inline void *dma_alloc(struct cfspi *cfspi, dma_addr_t *daddr) |
| { |
| return kmalloc(SPI_DMA_BUF_LEN, GFP_KERNEL); |
| } |
| |
| static inline void dma_free(struct cfspi *cfspi, void *cpu_addr, |
| dma_addr_t handle) |
| { |
| kfree(cpu_addr); |
| } |
| |
| #else |
| |
| static inline void *dma_alloc(struct cfspi *cfspi, dma_addr_t *daddr) |
| { |
| return dma_alloc_coherent(&cfspi->pdev->dev, SPI_DMA_BUF_LEN, daddr, |
| GFP_KERNEL); |
| } |
| |
| static inline void dma_free(struct cfspi *cfspi, void *cpu_addr, |
| dma_addr_t handle) |
| { |
| dma_free_coherent(&cfspi->pdev->dev, SPI_DMA_BUF_LEN, cpu_addr, handle); |
| } |
| #endif /* CONFIG_HAS_DMA */ |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| #define DEBUGFS_BUF_SIZE 4096 |
| |
| static struct dentry *dbgfs_root; |
| |
| static inline void driver_debugfs_create(void) |
| { |
| dbgfs_root = debugfs_create_dir(cfspi_spi_driver.driver.name, NULL); |
| } |
| |
| static inline void driver_debugfs_remove(void) |
| { |
| debugfs_remove(dbgfs_root); |
| } |
| |
| static inline void dev_debugfs_rem(struct cfspi *cfspi) |
| { |
| debugfs_remove(cfspi->dbgfs_frame); |
| debugfs_remove(cfspi->dbgfs_state); |
| debugfs_remove(cfspi->dbgfs_dir); |
| } |
| |
| static ssize_t dbgfs_state(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf; |
| int len = 0; |
| ssize_t size; |
| struct cfspi *cfspi = file->private_data; |
| |
| buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return 0; |
| |
| /* Print out debug information. */ |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "CAIF SPI debug information:\n"); |
| |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), FLAVOR); |
| |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "STATE: %d\n", cfspi->dbg_state); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Previous CMD: 0x%x\n", cfspi->pcmd); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Current CMD: 0x%x\n", cfspi->cmd); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Previous TX len: %d\n", cfspi->tx_ppck_len); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Previous RX len: %d\n", cfspi->rx_ppck_len); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Current TX len: %d\n", cfspi->tx_cpck_len); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Current RX len: %d\n", cfspi->rx_cpck_len); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Next TX len: %d\n", cfspi->tx_npck_len); |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Next RX len: %d\n", cfspi->rx_npck_len); |
| |
| if (len > DEBUGFS_BUF_SIZE) |
| len = DEBUGFS_BUF_SIZE; |
| |
| size = simple_read_from_buffer(user_buf, count, ppos, buf, len); |
| kfree(buf); |
| |
| return size; |
| } |
| |
| static ssize_t print_frame(char *buf, size_t size, char *frm, |
| size_t count, size_t cut) |
| { |
| int len = 0; |
| int i; |
| for (i = 0; i < count; i++) { |
| len += snprintf((buf + len), (size - len), |
| "[0x" BYTE_HEX_FMT "]", |
| frm[i]); |
| if ((i == cut) && (count > (cut * 2))) { |
| /* Fast forward. */ |
| i = count - cut; |
| len += snprintf((buf + len), (size - len), |
| "--- %zu bytes skipped ---\n", |
| count - (cut * 2)); |
| } |
| |
| if ((!(i % 10)) && i) { |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "\n"); |
| } |
| } |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), "\n"); |
| return len; |
| } |
| |
| static ssize_t dbgfs_frame(struct file *file, char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf; |
| int len = 0; |
| ssize_t size; |
| struct cfspi *cfspi; |
| |
| cfspi = file->private_data; |
| buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return 0; |
| |
| /* Print out debug information. */ |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Current frame:\n"); |
| |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Tx data (Len: %d):\n", cfspi->tx_cpck_len); |
| |
| len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len), |
| cfspi->xfer.va_tx[0], |
| (cfspi->tx_cpck_len + SPI_CMD_SZ), 100); |
| |
| len += snprintf((buf + len), (DEBUGFS_BUF_SIZE - len), |
| "Rx data (Len: %d):\n", cfspi->rx_cpck_len); |
| |
| len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len), |
| cfspi->xfer.va_rx, |
| (cfspi->rx_cpck_len + SPI_CMD_SZ), 100); |
| |
| size = simple_read_from_buffer(user_buf, count, ppos, buf, len); |
| kfree(buf); |
| |
| return size; |
| } |
| |
| static const struct file_operations dbgfs_state_fops = { |
| .open = simple_open, |
| .read = dbgfs_state, |
| .owner = THIS_MODULE |
| }; |
| |
| static const struct file_operations dbgfs_frame_fops = { |
| .open = simple_open, |
| .read = dbgfs_frame, |
| .owner = THIS_MODULE |
| }; |
| |
| static inline void dev_debugfs_add(struct cfspi *cfspi) |
| { |
| cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root); |
| cfspi->dbgfs_state = debugfs_create_file("state", 0444, |
| cfspi->dbgfs_dir, cfspi, |
| &dbgfs_state_fops); |
| cfspi->dbgfs_frame = debugfs_create_file("frame", 0444, |
| cfspi->dbgfs_dir, cfspi, |
| &dbgfs_frame_fops); |
| } |
| |
| inline void cfspi_dbg_state(struct cfspi *cfspi, int state) |
| { |
| cfspi->dbg_state = state; |
| }; |
| #else |
| |
| static inline void driver_debugfs_create(void) |
| { |
| } |
| |
| static inline void driver_debugfs_remove(void) |
| { |
| } |
| |
| static inline void dev_debugfs_add(struct cfspi *cfspi) |
| { |
| } |
| |
| static inline void dev_debugfs_rem(struct cfspi *cfspi) |
| { |
| } |
| |
| inline void cfspi_dbg_state(struct cfspi *cfspi, int state) |
| { |
| } |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| static LIST_HEAD(cfspi_list); |
| static spinlock_t cfspi_list_lock; |
| |
| /* SPI uplink head alignment. */ |
| static ssize_t up_head_align_show(struct device_driver *driver, char *buf) |
| { |
| return sprintf(buf, "%d\n", spi_up_head_align); |
| } |
| |
| static DRIVER_ATTR_RO(up_head_align); |
| |
| /* SPI uplink tail alignment. */ |
| static ssize_t up_tail_align_show(struct device_driver *driver, char *buf) |
| { |
| return sprintf(buf, "%d\n", spi_up_tail_align); |
| } |
| |
| static DRIVER_ATTR_RO(up_tail_align); |
| |
| /* SPI downlink head alignment. */ |
| static ssize_t down_head_align_show(struct device_driver *driver, char *buf) |
| { |
| return sprintf(buf, "%d\n", spi_down_head_align); |
| } |
| |
| static DRIVER_ATTR_RO(down_head_align); |
| |
| /* SPI downlink tail alignment. */ |
| static ssize_t down_tail_align_show(struct device_driver *driver, char *buf) |
| { |
| return sprintf(buf, "%d\n", spi_down_tail_align); |
| } |
| |
| static DRIVER_ATTR_RO(down_tail_align); |
| |
| /* SPI frame alignment. */ |
| static ssize_t frame_align_show(struct device_driver *driver, char *buf) |
| { |
| return sprintf(buf, "%d\n", spi_frm_align); |
| } |
| |
| static DRIVER_ATTR_RO(frame_align); |
| |
| int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len) |
| { |
| u8 *dst = buf; |
| caif_assert(buf); |
| |
| if (cfspi->slave && !cfspi->slave_talked) |
| cfspi->slave_talked = true; |
| |
| do { |
| struct sk_buff *skb; |
| struct caif_payload_info *info; |
| int spad = 0; |
| int epad; |
| |
| skb = skb_dequeue(&cfspi->chead); |
| if (!skb) |
| break; |
| |
| /* |
| * Calculate length of frame including SPI padding. |
| * The payload position is found in the control buffer. |
| */ |
| info = (struct caif_payload_info *)&skb->cb; |
| |
| /* |
| * Compute head offset i.e. number of bytes to add to |
| * get the start of the payload aligned. |
| */ |
| if (spi_up_head_align > 1) { |
| spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align); |
| *dst = (u8)(spad - 1); |
| dst += spad; |
| } |
| |
| /* Copy in CAIF frame. */ |
| skb_copy_bits(skb, 0, dst, skb->len); |
| dst += skb->len; |
| cfspi->ndev->stats.tx_packets++; |
| cfspi->ndev->stats.tx_bytes += skb->len; |
| |
| /* |
| * Compute tail offset i.e. number of bytes to add to |
| * get the complete CAIF frame aligned. |
| */ |
| epad = PAD_POW2((skb->len + spad), spi_up_tail_align); |
| dst += epad; |
| |
| dev_kfree_skb(skb); |
| |
| } while ((dst - buf) < len); |
| |
| return dst - buf; |
| } |
| |
| int cfspi_xmitlen(struct cfspi *cfspi) |
| { |
| struct sk_buff *skb = NULL; |
| int frm_len = 0; |
| int pkts = 0; |
| |
| /* |
| * Decommit previously committed frames. |
| * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead) |
| */ |
| while (skb_peek(&cfspi->chead)) { |
| skb = skb_dequeue_tail(&cfspi->chead); |
| skb_queue_head(&cfspi->qhead, skb); |
| } |
| |
| do { |
| struct caif_payload_info *info = NULL; |
| int spad = 0; |
| int epad = 0; |
| |
| skb = skb_dequeue(&cfspi->qhead); |
| if (!skb) |
| break; |
| |
| /* |
| * Calculate length of frame including SPI padding. |
| * The payload position is found in the control buffer. |
| */ |
| info = (struct caif_payload_info *)&skb->cb; |
| |
| /* |
| * Compute head offset i.e. number of bytes to add to |
| * get the start of the payload aligned. |
| */ |
| if (spi_up_head_align > 1) |
| spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align); |
| |
| /* |
| * Compute tail offset i.e. number of bytes to add to |
| * get the complete CAIF frame aligned. |
| */ |
| epad = PAD_POW2((skb->len + spad), spi_up_tail_align); |
| |
| if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) { |
| skb_queue_tail(&cfspi->chead, skb); |
| pkts++; |
| frm_len += skb->len + spad + epad; |
| } else { |
| /* Put back packet. */ |
| skb_queue_head(&cfspi->qhead, skb); |
| break; |
| } |
| } while (pkts <= CAIF_MAX_SPI_PKTS); |
| |
| /* |
| * Send flow on if previously sent flow off |
| * and now go below the low water mark |
| */ |
| if (cfspi->flow_off_sent && cfspi->qhead.qlen < cfspi->qd_low_mark && |
| cfspi->cfdev.flowctrl) { |
| cfspi->flow_off_sent = 0; |
| cfspi->cfdev.flowctrl(cfspi->ndev, 1); |
| } |
| |
| return frm_len; |
| } |
| |
| static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc) |
| { |
| struct cfspi *cfspi = (struct cfspi *)ifc->priv; |
| |
| /* |
| * The slave device is the master on the link. Interrupts before the |
| * slave has transmitted are considered spurious. |
| */ |
| if (cfspi->slave && !cfspi->slave_talked) { |
| printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n"); |
| return; |
| } |
| |
| if (!in_interrupt()) |
| spin_lock(&cfspi->lock); |
| if (assert) { |
| set_bit(SPI_SS_ON, &cfspi->state); |
| set_bit(SPI_XFER, &cfspi->state); |
| } else { |
| set_bit(SPI_SS_OFF, &cfspi->state); |
| } |
| if (!in_interrupt()) |
| spin_unlock(&cfspi->lock); |
| |
| /* Wake up the xfer thread. */ |
| if (assert) |
| wake_up_interruptible(&cfspi->wait); |
| } |
| |
| static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc) |
| { |
| struct cfspi *cfspi = (struct cfspi *)ifc->priv; |
| |
| /* Transfer done, complete work queue */ |
| complete(&cfspi->comp); |
| } |
| |
| static int cfspi_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct cfspi *cfspi = NULL; |
| unsigned long flags; |
| if (!dev) |
| return -EINVAL; |
| |
| cfspi = netdev_priv(dev); |
| |
| skb_queue_tail(&cfspi->qhead, skb); |
| |
| spin_lock_irqsave(&cfspi->lock, flags); |
| if (!test_and_set_bit(SPI_XFER, &cfspi->state)) { |
| /* Wake up xfer thread. */ |
| wake_up_interruptible(&cfspi->wait); |
| } |
| spin_unlock_irqrestore(&cfspi->lock, flags); |
| |
| /* Send flow off if number of bytes is above high water mark */ |
| if (!cfspi->flow_off_sent && |
| cfspi->qhead.qlen > cfspi->qd_high_mark && |
| cfspi->cfdev.flowctrl) { |
| cfspi->flow_off_sent = 1; |
| cfspi->cfdev.flowctrl(cfspi->ndev, 0); |
| } |
| |
| return 0; |
| } |
| |
| int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len) |
| { |
| u8 *src = buf; |
| |
| caif_assert(buf != NULL); |
| |
| do { |
| int res; |
| struct sk_buff *skb = NULL; |
| int spad = 0; |
| int epad = 0; |
| int pkt_len = 0; |
| |
| /* |
| * Compute head offset i.e. number of bytes added to |
| * get the start of the payload aligned. |
| */ |
| if (spi_down_head_align > 1) { |
| spad = 1 + *src; |
| src += spad; |
| } |
| |
| /* Read length of CAIF frame (little endian). */ |
| pkt_len = *src; |
| pkt_len |= ((*(src+1)) << 8) & 0xFF00; |
| pkt_len += 2; /* Add FCS fields. */ |
| |
| /* Get a suitable caif packet and copy in data. */ |
| |
| skb = netdev_alloc_skb(cfspi->ndev, pkt_len + 1); |
| caif_assert(skb != NULL); |
| |
| skb_put_data(skb, src, pkt_len); |
| src += pkt_len; |
| |
| skb->protocol = htons(ETH_P_CAIF); |
| skb_reset_mac_header(skb); |
| |
| /* |
| * Push received packet up the stack. |
| */ |
| if (!spi_loop) |
| res = netif_rx_ni(skb); |
| else |
| res = cfspi_xmit(skb, cfspi->ndev); |
| |
| if (!res) { |
| cfspi->ndev->stats.rx_packets++; |
| cfspi->ndev->stats.rx_bytes += pkt_len; |
| } else |
| cfspi->ndev->stats.rx_dropped++; |
| |
| /* |
| * Compute tail offset i.e. number of bytes added to |
| * get the complete CAIF frame aligned. |
| */ |
| epad = PAD_POW2((pkt_len + spad), spi_down_tail_align); |
| src += epad; |
| } while ((src - buf) < len); |
| |
| return src - buf; |
| } |
| |
| static int cfspi_open(struct net_device *dev) |
| { |
| netif_wake_queue(dev); |
| return 0; |
| } |
| |
| static int cfspi_close(struct net_device *dev) |
| { |
| netif_stop_queue(dev); |
| return 0; |
| } |
| |
| static int cfspi_init(struct net_device *dev) |
| { |
| int res = 0; |
| struct cfspi *cfspi = netdev_priv(dev); |
| |
| /* Set flow info. */ |
| cfspi->flow_off_sent = 0; |
| cfspi->qd_low_mark = LOW_WATER_MARK; |
| cfspi->qd_high_mark = HIGH_WATER_MARK; |
| |
| /* Set slave info. */ |
| if (!strncmp(cfspi_spi_driver.driver.name, "cfspi_sspi", 10)) { |
| cfspi->slave = true; |
| cfspi->slave_talked = false; |
| } else { |
| cfspi->slave = false; |
| cfspi->slave_talked = false; |
| } |
| |
| /* Allocate DMA buffers. */ |
| cfspi->xfer.va_tx[0] = dma_alloc(cfspi, &cfspi->xfer.pa_tx[0]); |
| if (!cfspi->xfer.va_tx[0]) { |
| res = -ENODEV; |
| goto err_dma_alloc_tx_0; |
| } |
| |
| cfspi->xfer.va_rx = dma_alloc(cfspi, &cfspi->xfer.pa_rx); |
| |
| if (!cfspi->xfer.va_rx) { |
| res = -ENODEV; |
| goto err_dma_alloc_rx; |
| } |
| |
| /* Initialize the work queue. */ |
| INIT_WORK(&cfspi->work, cfspi_xfer); |
| |
| /* Initialize spin locks. */ |
| spin_lock_init(&cfspi->lock); |
| |
| /* Initialize flow control state. */ |
| cfspi->flow_stop = false; |
| |
| /* Initialize wait queue. */ |
| init_waitqueue_head(&cfspi->wait); |
| |
| /* Create work thread. */ |
| cfspi->wq = create_singlethread_workqueue(dev->name); |
| if (!cfspi->wq) { |
| printk(KERN_WARNING "CFSPI: failed to create work queue.\n"); |
| res = -ENODEV; |
| goto err_create_wq; |
| } |
| |
| /* Initialize work queue. */ |
| init_completion(&cfspi->comp); |
| |
| /* Create debugfs entries. */ |
| dev_debugfs_add(cfspi); |
| |
| /* Set up the ifc. */ |
| cfspi->ifc.ss_cb = cfspi_ss_cb; |
| cfspi->ifc.xfer_done_cb = cfspi_xfer_done_cb; |
| cfspi->ifc.priv = cfspi; |
| |
| /* Add CAIF SPI device to list. */ |
| spin_lock(&cfspi_list_lock); |
| list_add_tail(&cfspi->list, &cfspi_list); |
| spin_unlock(&cfspi_list_lock); |
| |
| /* Schedule the work queue. */ |
| queue_work(cfspi->wq, &cfspi->work); |
| |
| return 0; |
| |
| err_create_wq: |
| dma_free(cfspi, cfspi->xfer.va_rx, cfspi->xfer.pa_rx); |
| err_dma_alloc_rx: |
| dma_free(cfspi, cfspi->xfer.va_tx[0], cfspi->xfer.pa_tx[0]); |
| err_dma_alloc_tx_0: |
| return res; |
| } |
| |
| static void cfspi_uninit(struct net_device *dev) |
| { |
| struct cfspi *cfspi = netdev_priv(dev); |
| |
| /* Remove from list. */ |
| spin_lock(&cfspi_list_lock); |
| list_del(&cfspi->list); |
| spin_unlock(&cfspi_list_lock); |
| |
| cfspi->ndev = NULL; |
| /* Free DMA buffers. */ |
| dma_free(cfspi, cfspi->xfer.va_rx, cfspi->xfer.pa_rx); |
| dma_free(cfspi, cfspi->xfer.va_tx[0], cfspi->xfer.pa_tx[0]); |
| set_bit(SPI_TERMINATE, &cfspi->state); |
| wake_up_interruptible(&cfspi->wait); |
| destroy_workqueue(cfspi->wq); |
| /* Destroy debugfs directory and files. */ |
| dev_debugfs_rem(cfspi); |
| return; |
| } |
| |
| static const struct net_device_ops cfspi_ops = { |
| .ndo_open = cfspi_open, |
| .ndo_stop = cfspi_close, |
| .ndo_init = cfspi_init, |
| .ndo_uninit = cfspi_uninit, |
| .ndo_start_xmit = cfspi_xmit |
| }; |
| |
| static void cfspi_setup(struct net_device *dev) |
| { |
| struct cfspi *cfspi = netdev_priv(dev); |
| dev->features = 0; |
| dev->netdev_ops = &cfspi_ops; |
| dev->type = ARPHRD_CAIF; |
| dev->flags = IFF_NOARP | IFF_POINTOPOINT; |
| dev->priv_flags |= IFF_NO_QUEUE; |
| dev->mtu = SPI_MAX_PAYLOAD_SIZE; |
| dev->needs_free_netdev = true; |
| skb_queue_head_init(&cfspi->qhead); |
| skb_queue_head_init(&cfspi->chead); |
| cfspi->cfdev.link_select = CAIF_LINK_HIGH_BANDW; |
| cfspi->cfdev.use_frag = false; |
| cfspi->cfdev.use_stx = false; |
| cfspi->cfdev.use_fcs = false; |
| cfspi->ndev = dev; |
| } |
| |
| int cfspi_spi_probe(struct platform_device *pdev) |
| { |
| struct cfspi *cfspi = NULL; |
| struct net_device *ndev; |
| struct cfspi_dev *dev; |
| int res; |
| dev = (struct cfspi_dev *)pdev->dev.platform_data; |
| |
| if (!dev) |
| return -ENODEV; |
| |
| ndev = alloc_netdev(sizeof(struct cfspi), "cfspi%d", |
| NET_NAME_UNKNOWN, cfspi_setup); |
| if (!ndev) |
| return -ENOMEM; |
| |
| cfspi = netdev_priv(ndev); |
| netif_stop_queue(ndev); |
| cfspi->ndev = ndev; |
| cfspi->pdev = pdev; |
| |
| /* Assign the SPI device. */ |
| cfspi->dev = dev; |
| /* Assign the device ifc to this SPI interface. */ |
| dev->ifc = &cfspi->ifc; |
| |
| /* Register network device. */ |
| res = register_netdev(ndev); |
| if (res) { |
| printk(KERN_ERR "CFSPI: Reg. error: %d.\n", res); |
| goto err_net_reg; |
| } |
| return res; |
| |
| err_net_reg: |
| free_netdev(ndev); |
| |
| return res; |
| } |
| |
| int cfspi_spi_remove(struct platform_device *pdev) |
| { |
| /* Everything is done in cfspi_uninit(). */ |
| return 0; |
| } |
| |
| static void __exit cfspi_exit_module(void) |
| { |
| struct list_head *list_node; |
| struct list_head *n; |
| struct cfspi *cfspi = NULL; |
| |
| list_for_each_safe(list_node, n, &cfspi_list) { |
| cfspi = list_entry(list_node, struct cfspi, list); |
| unregister_netdev(cfspi->ndev); |
| } |
| |
| /* Destroy sysfs files. */ |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_up_head_align); |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_up_tail_align); |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_down_head_align); |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_down_tail_align); |
| driver_remove_file(&cfspi_spi_driver.driver, &driver_attr_frame_align); |
| /* Unregister platform driver. */ |
| platform_driver_unregister(&cfspi_spi_driver); |
| /* Destroy debugfs root directory. */ |
| driver_debugfs_remove(); |
| } |
| |
| static int __init cfspi_init_module(void) |
| { |
| int result; |
| |
| /* Initialize spin lock. */ |
| spin_lock_init(&cfspi_list_lock); |
| |
| /* Register platform driver. */ |
| result = platform_driver_register(&cfspi_spi_driver); |
| if (result) { |
| printk(KERN_ERR "Could not register platform SPI driver.\n"); |
| goto err_dev_register; |
| } |
| |
| /* Create sysfs files. */ |
| result = |
| driver_create_file(&cfspi_spi_driver.driver, |
| &driver_attr_up_head_align); |
| if (result) { |
| printk(KERN_ERR "Sysfs creation failed 1.\n"); |
| goto err_create_up_head_align; |
| } |
| |
| result = |
| driver_create_file(&cfspi_spi_driver.driver, |
| &driver_attr_up_tail_align); |
| if (result) { |
| printk(KERN_ERR "Sysfs creation failed 2.\n"); |
| goto err_create_up_tail_align; |
| } |
| |
| result = |
| driver_create_file(&cfspi_spi_driver.driver, |
| &driver_attr_down_head_align); |
| if (result) { |
| printk(KERN_ERR "Sysfs creation failed 3.\n"); |
| goto err_create_down_head_align; |
| } |
| |
| result = |
| driver_create_file(&cfspi_spi_driver.driver, |
| &driver_attr_down_tail_align); |
| if (result) { |
| printk(KERN_ERR "Sysfs creation failed 4.\n"); |
| goto err_create_down_tail_align; |
| } |
| |
| result = |
| driver_create_file(&cfspi_spi_driver.driver, |
| &driver_attr_frame_align); |
| if (result) { |
| printk(KERN_ERR "Sysfs creation failed 5.\n"); |
| goto err_create_frame_align; |
| } |
| driver_debugfs_create(); |
| return result; |
| |
| err_create_frame_align: |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_down_tail_align); |
| err_create_down_tail_align: |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_down_head_align); |
| err_create_down_head_align: |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_up_tail_align); |
| err_create_up_tail_align: |
| driver_remove_file(&cfspi_spi_driver.driver, |
| &driver_attr_up_head_align); |
| err_create_up_head_align: |
| platform_driver_unregister(&cfspi_spi_driver); |
| err_dev_register: |
| return result; |
| } |
| |
| module_init(cfspi_init_module); |
| module_exit(cfspi_exit_module); |