blob: 514707ef67792184078e965e14625f2a8a6c1ef2 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Procedures for interfacing to Open Firmware.
*
* Paul Mackerras August 1996.
* Copyright (C) 1996-2005 Paul Mackerras.
*
* Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
* {engebret|bergner}@us.ibm.com
*/
#undef DEBUG_PROM
/* we cannot use FORTIFY as it brings in new symbols */
#define __NO_FORTIFY
#include <stdarg.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/threads.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/bitops.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/iommu.h>
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
#include <asm/asm-prototypes.h>
#include <linux/linux_logo.h>
/* All of prom_init bss lives here */
#define __prombss __section(.bss.prominit)
/*
* Eventually bump that one up
*/
#define DEVTREE_CHUNK_SIZE 0x100000
/*
* This is the size of the local memory reserve map that gets copied
* into the boot params passed to the kernel. That size is totally
* flexible as the kernel just reads the list until it encounters an
* entry with size 0, so it can be changed without breaking binary
* compatibility
*/
#define MEM_RESERVE_MAP_SIZE 8
/*
* prom_init() is called very early on, before the kernel text
* and data have been mapped to KERNELBASE. At this point the code
* is running at whatever address it has been loaded at.
* On ppc32 we compile with -mrelocatable, which means that references
* to extern and static variables get relocated automatically.
* ppc64 objects are always relocatable, we just need to relocate the
* TOC.
*
* Because OF may have mapped I/O devices into the area starting at
* KERNELBASE, particularly on CHRP machines, we can't safely call
* OF once the kernel has been mapped to KERNELBASE. Therefore all
* OF calls must be done within prom_init().
*
* ADDR is used in calls to call_prom. The 4th and following
* arguments to call_prom should be 32-bit values.
* On ppc64, 64 bit values are truncated to 32 bits (and
* fortunately don't get interpreted as two arguments).
*/
#define ADDR(x) (u32)(unsigned long)(x)
#ifdef CONFIG_PPC64
#define OF_WORKAROUNDS 0
#else
#define OF_WORKAROUNDS of_workarounds
static int of_workarounds __prombss;
#endif
#define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */
#define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */
#define PROM_BUG() do { \
prom_printf("kernel BUG at %s line 0x%x!\n", \
__FILE__, __LINE__); \
__asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \
} while (0)
#ifdef DEBUG_PROM
#define prom_debug(x...) prom_printf(x)
#else
#define prom_debug(x...) do { } while (0)
#endif
typedef u32 prom_arg_t;
struct prom_args {
__be32 service;
__be32 nargs;
__be32 nret;
__be32 args[10];
};
struct prom_t {
ihandle root;
phandle chosen;
int cpu;
ihandle stdout;
ihandle mmumap;
ihandle memory;
};
struct mem_map_entry {
__be64 base;
__be64 size;
};
typedef __be32 cell_t;
extern void __start(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7, unsigned long r8,
unsigned long r9);
#ifdef CONFIG_PPC64
extern int enter_prom(struct prom_args *args, unsigned long entry);
#else
static inline int enter_prom(struct prom_args *args, unsigned long entry)
{
return ((int (*)(struct prom_args *))entry)(args);
}
#endif
extern void copy_and_flush(unsigned long dest, unsigned long src,
unsigned long size, unsigned long offset);
/* prom structure */
static struct prom_t __prombss prom;
static unsigned long __prombss prom_entry;
static char __prombss of_stdout_device[256];
static char __prombss prom_scratch[256];
static unsigned long __prombss dt_header_start;
static unsigned long __prombss dt_struct_start, dt_struct_end;
static unsigned long __prombss dt_string_start, dt_string_end;
static unsigned long __prombss prom_initrd_start, prom_initrd_end;
#ifdef CONFIG_PPC64
static int __prombss prom_iommu_force_on;
static int __prombss prom_iommu_off;
static unsigned long __prombss prom_tce_alloc_start;
static unsigned long __prombss prom_tce_alloc_end;
#endif
#ifdef CONFIG_PPC_PSERIES
static bool __prombss prom_radix_disable;
static bool __prombss prom_xive_disable;
#endif
struct platform_support {
bool hash_mmu;
bool radix_mmu;
bool radix_gtse;
bool xive;
};
/* Platforms codes are now obsolete in the kernel. Now only used within this
* file and ultimately gone too. Feel free to change them if you need, they
* are not shared with anything outside of this file anymore
*/
#define PLATFORM_PSERIES 0x0100
#define PLATFORM_PSERIES_LPAR 0x0101
#define PLATFORM_LPAR 0x0001
#define PLATFORM_POWERMAC 0x0400
#define PLATFORM_GENERIC 0x0500
static int __prombss of_platform;
static char __prombss prom_cmd_line[COMMAND_LINE_SIZE];
static unsigned long __prombss prom_memory_limit;
static unsigned long __prombss alloc_top;
static unsigned long __prombss alloc_top_high;
static unsigned long __prombss alloc_bottom;
static unsigned long __prombss rmo_top;
static unsigned long __prombss ram_top;
static struct mem_map_entry __prombss mem_reserve_map[MEM_RESERVE_MAP_SIZE];
static int __prombss mem_reserve_cnt;
static cell_t __prombss regbuf[1024];
static bool __prombss rtas_has_query_cpu_stopped;
/*
* Error results ... some OF calls will return "-1" on error, some
* will return 0, some will return either. To simplify, here are
* macros to use with any ihandle or phandle return value to check if
* it is valid
*/
#define PROM_ERROR (-1u)
#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
/* Copied from lib/string.c and lib/kstrtox.c */
static int __init prom_strcmp(const char *cs, const char *ct)
{
unsigned char c1, c2;
while (1) {
c1 = *cs++;
c2 = *ct++;
if (c1 != c2)
return c1 < c2 ? -1 : 1;
if (!c1)
break;
}
return 0;
}
static char __init *prom_strcpy(char *dest, const char *src)
{
char *tmp = dest;
while ((*dest++ = *src++) != '\0')
/* nothing */;
return tmp;
}
static int __init prom_strncmp(const char *cs, const char *ct, size_t count)
{
unsigned char c1, c2;
while (count) {
c1 = *cs++;
c2 = *ct++;
if (c1 != c2)
return c1 < c2 ? -1 : 1;
if (!c1)
break;
count--;
}
return 0;
}
static size_t __init prom_strlen(const char *s)
{
const char *sc;
for (sc = s; *sc != '\0'; ++sc)
/* nothing */;
return sc - s;
}
static int __init prom_memcmp(const void *cs, const void *ct, size_t count)
{
const unsigned char *su1, *su2;
int res = 0;
for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
if ((res = *su1 - *su2) != 0)
break;
return res;
}
static char __init *prom_strstr(const char *s1, const char *s2)
{
size_t l1, l2;
l2 = prom_strlen(s2);
if (!l2)
return (char *)s1;
l1 = prom_strlen(s1);
while (l1 >= l2) {
l1--;
if (!prom_memcmp(s1, s2, l2))
return (char *)s1;
s1++;
}
return NULL;
}
static size_t __init prom_strlcpy(char *dest, const char *src, size_t size)
{
size_t ret = prom_strlen(src);
if (size) {
size_t len = (ret >= size) ? size - 1 : ret;
memcpy(dest, src, len);
dest[len] = '\0';
}
return ret;
}
#ifdef CONFIG_PPC_PSERIES
static int __init prom_strtobool(const char *s, bool *res)
{
if (!s)
return -EINVAL;
switch (s[0]) {
case 'y':
case 'Y':
case '1':
*res = true;
return 0;
case 'n':
case 'N':
case '0':
*res = false;
return 0;
case 'o':
case 'O':
switch (s[1]) {
case 'n':
case 'N':
*res = true;
return 0;
case 'f':
case 'F':
*res = false;
return 0;
default:
break;
}
default:
break;
}
return -EINVAL;
}
#endif
/* This is the one and *ONLY* place where we actually call open
* firmware.
*/
static int __init call_prom(const char *service, int nargs, int nret, ...)
{
int i;
struct prom_args args;
va_list list;
args.service = cpu_to_be32(ADDR(service));
args.nargs = cpu_to_be32(nargs);
args.nret = cpu_to_be32(nret);
va_start(list, nret);
for (i = 0; i < nargs; i++)
args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
va_end(list);
for (i = 0; i < nret; i++)
args.args[nargs+i] = 0;
if (enter_prom(&args, prom_entry) < 0)
return PROM_ERROR;
return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
}
static int __init call_prom_ret(const char *service, int nargs, int nret,
prom_arg_t *rets, ...)
{
int i;
struct prom_args args;
va_list list;
args.service = cpu_to_be32(ADDR(service));
args.nargs = cpu_to_be32(nargs);
args.nret = cpu_to_be32(nret);
va_start(list, rets);
for (i = 0; i < nargs; i++)
args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
va_end(list);
for (i = 0; i < nret; i++)
args.args[nargs+i] = 0;
if (enter_prom(&args, prom_entry) < 0)
return PROM_ERROR;
if (rets != NULL)
for (i = 1; i < nret; ++i)
rets[i-1] = be32_to_cpu(args.args[nargs+i]);
return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
}
static void __init prom_print(const char *msg)
{
const char *p, *q;
if (prom.stdout == 0)
return;
for (p = msg; *p != 0; p = q) {
for (q = p; *q != 0 && *q != '\n'; ++q)
;
if (q > p)
call_prom("write", 3, 1, prom.stdout, p, q - p);
if (*q == 0)
break;
++q;
call_prom("write", 3, 1, prom.stdout, ADDR("\r\n"), 2);
}
}
/*
* Both prom_print_hex & prom_print_dec takes an unsigned long as input so that
* we do not need __udivdi3 or __umoddi3 on 32bits.
*/
static void __init prom_print_hex(unsigned long val)
{
int i, nibbles = sizeof(val)*2;
char buf[sizeof(val)*2+1];
for (i = nibbles-1; i >= 0; i--) {
buf[i] = (val & 0xf) + '0';
if (buf[i] > '9')
buf[i] += ('a'-'0'-10);
val >>= 4;
}
buf[nibbles] = '\0';
call_prom("write", 3, 1, prom.stdout, buf, nibbles);
}
/* max number of decimal digits in an unsigned long */
#define UL_DIGITS 21
static void __init prom_print_dec(unsigned long val)
{
int i, size;
char buf[UL_DIGITS+1];
for (i = UL_DIGITS-1; i >= 0; i--) {
buf[i] = (val % 10) + '0';
val = val/10;
if (val == 0)
break;
}
/* shift stuff down */
size = UL_DIGITS - i;
call_prom("write", 3, 1, prom.stdout, buf+i, size);
}
__printf(1, 2)
static void __init prom_printf(const char *format, ...)
{
const char *p, *q, *s;
va_list args;
unsigned long v;
long vs;
int n = 0;
va_start(args, format);
for (p = format; *p != 0; p = q) {
for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q)
;
if (q > p)
call_prom("write", 3, 1, prom.stdout, p, q - p);
if (*q == 0)
break;
if (*q == '\n') {
++q;
call_prom("write", 3, 1, prom.stdout,
ADDR("\r\n"), 2);
continue;
}
++q;
if (*q == 0)
break;
while (*q == 'l') {
++q;
++n;
}
switch (*q) {
case 's':
++q;
s = va_arg(args, const char *);
prom_print(s);
break;
case 'x':
++q;
switch (n) {
case 0:
v = va_arg(args, unsigned int);
break;
case 1:
v = va_arg(args, unsigned long);
break;
case 2:
default:
v = va_arg(args, unsigned long long);
break;
}
prom_print_hex(v);
break;
case 'u':
++q;
switch (n) {
case 0:
v = va_arg(args, unsigned int);
break;
case 1:
v = va_arg(args, unsigned long);
break;
case 2:
default:
v = va_arg(args, unsigned long long);
break;
}
prom_print_dec(v);
break;
case 'd':
++q;
switch (n) {
case 0:
vs = va_arg(args, int);
break;
case 1:
vs = va_arg(args, long);
break;
case 2:
default:
vs = va_arg(args, long long);
break;
}
if (vs < 0) {
prom_print("-");
vs = -vs;
}
prom_print_dec(vs);
break;
}
}
va_end(args);
}
static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
unsigned long align)
{
if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) {
/*
* Old OF requires we claim physical and virtual separately
* and then map explicitly (assuming virtual mode)
*/
int ret;
prom_arg_t result;
ret = call_prom_ret("call-method", 5, 2, &result,
ADDR("claim"), prom.memory,
align, size, virt);
if (ret != 0 || result == -1)
return -1;
ret = call_prom_ret("call-method", 5, 2, &result,
ADDR("claim"), prom.mmumap,
align, size, virt);
if (ret != 0) {
call_prom("call-method", 4, 1, ADDR("release"),
prom.memory, size, virt);
return -1;
}
/* the 0x12 is M (coherence) + PP == read/write */
call_prom("call-method", 6, 1,
ADDR("map"), prom.mmumap, 0x12, size, virt, virt);
return virt;
}
return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size,
(prom_arg_t)align);
}
static void __init __attribute__((noreturn)) prom_panic(const char *reason)
{
prom_print(reason);
/* Do not call exit because it clears the screen on pmac
* it also causes some sort of double-fault on early pmacs */
if (of_platform == PLATFORM_POWERMAC)
asm("trap\n");
/* ToDo: should put up an SRC here on pSeries */
call_prom("exit", 0, 0);
for (;;) /* should never get here */
;
}
static int __init prom_next_node(phandle *nodep)
{
phandle node;
if ((node = *nodep) != 0
&& (*nodep = call_prom("child", 1, 1, node)) != 0)
return 1;
if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
return 1;
for (;;) {
if ((node = call_prom("parent", 1, 1, node)) == 0)
return 0;
if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
return 1;
}
}
static inline int __init prom_getprop(phandle node, const char *pname,
void *value, size_t valuelen)
{
return call_prom("getprop", 4, 1, node, ADDR(pname),
(u32)(unsigned long) value, (u32) valuelen);
}
static inline int __init prom_getproplen(phandle node, const char *pname)
{
return call_prom("getproplen", 2, 1, node, ADDR(pname));
}
static void add_string(char **str, const char *q)
{
char *p = *str;
while (*q)
*p++ = *q++;
*p++ = ' ';
*str = p;
}
static char *tohex(unsigned int x)
{
static const char digits[] __initconst = "0123456789abcdef";
static char result[9] __prombss;
int i;
result[8] = 0;
i = 8;
do {
--i;
result[i] = digits[x & 0xf];
x >>= 4;
} while (x != 0 && i > 0);
return &result[i];
}
static int __init prom_setprop(phandle node, const char *nodename,
const char *pname, void *value, size_t valuelen)
{
char cmd[256], *p;
if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL))
return call_prom("setprop", 4, 1, node, ADDR(pname),
(u32)(unsigned long) value, (u32) valuelen);
/* gah... setprop doesn't work on longtrail, have to use interpret */
p = cmd;
add_string(&p, "dev");
add_string(&p, nodename);
add_string(&p, tohex((u32)(unsigned long) value));
add_string(&p, tohex(valuelen));
add_string(&p, tohex(ADDR(pname)));
add_string(&p, tohex(prom_strlen(pname)));
add_string(&p, "property");
*p = 0;
return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
}
/* We can't use the standard versions because of relocation headaches. */
#define isxdigit(c) (('0' <= (c) && (c) <= '9') \
|| ('a' <= (c) && (c) <= 'f') \
|| ('A' <= (c) && (c) <= 'F'))
#define isdigit(c) ('0' <= (c) && (c) <= '9')
#define islower(c) ('a' <= (c) && (c) <= 'z')
#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c))
static unsigned long prom_strtoul(const char *cp, const char **endp)
{
unsigned long result = 0, base = 10, value;
if (*cp == '0') {
base = 8;
cp++;
if (toupper(*cp) == 'X') {
cp++;
base = 16;
}
}
while (isxdigit(*cp) &&
(value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
result = result * base + value;
cp++;
}
if (endp)
*endp = cp;
return result;
}
static unsigned long prom_memparse(const char *ptr, const char **retptr)
{
unsigned long ret = prom_strtoul(ptr, retptr);
int shift = 0;
/*
* We can't use a switch here because GCC *may* generate a
* jump table which won't work, because we're not running at
* the address we're linked at.
*/
if ('G' == **retptr || 'g' == **retptr)
shift = 30;
if ('M' == **retptr || 'm' == **retptr)
shift = 20;
if ('K' == **retptr || 'k' == **retptr)
shift = 10;
if (shift) {
ret <<= shift;
(*retptr)++;
}
return ret;
}
/*
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
*/
static void __init early_cmdline_parse(void)
{
const char *opt;
char *p;
int l = 0;
prom_cmd_line[0] = 0;
p = prom_cmd_line;
if ((long)prom.chosen > 0)
l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && (l <= 0 || p[0] == '\0')) /* dbl check */
prom_strlcpy(prom_cmd_line, CONFIG_CMDLINE, sizeof(prom_cmd_line));
prom_printf("command line: %s\n", prom_cmd_line);
#ifdef CONFIG_PPC64
opt = prom_strstr(prom_cmd_line, "iommu=");
if (opt) {
prom_printf("iommu opt is: %s\n", opt);
opt += 6;
while (*opt && *opt == ' ')
opt++;
if (!prom_strncmp(opt, "off", 3))
prom_iommu_off = 1;
else if (!prom_strncmp(opt, "force", 5))
prom_iommu_force_on = 1;
}
#endif
opt = prom_strstr(prom_cmd_line, "mem=");
if (opt) {
opt += 4;
prom_memory_limit = prom_memparse(opt, (const char **)&opt);
#ifdef CONFIG_PPC64
/* Align to 16 MB == size of ppc64 large page */
prom_memory_limit = ALIGN(prom_memory_limit, 0x1000000);
#endif
}
#ifdef CONFIG_PPC_PSERIES
prom_radix_disable = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT);
opt = prom_strstr(prom_cmd_line, "disable_radix");
if (opt) {
opt += 13;
if (*opt && *opt == '=') {
bool val;
if (prom_strtobool(++opt, &val))
prom_radix_disable = false;
else
prom_radix_disable = val;
} else
prom_radix_disable = true;
}
if (prom_radix_disable)
prom_debug("Radix disabled from cmdline\n");
opt = prom_strstr(prom_cmd_line, "xive=off");
if (opt) {
prom_xive_disable = true;
prom_debug("XIVE disabled from cmdline\n");
}
#endif /* CONFIG_PPC_PSERIES */
}
#ifdef CONFIG_PPC_PSERIES
/*
* The architecture vector has an array of PVR mask/value pairs,
* followed by # option vectors - 1, followed by the option vectors.
*
* See prom.h for the definition of the bits specified in the
* architecture vector.
*/
/* Firmware expects the value to be n - 1, where n is the # of vectors */
#define NUM_VECTORS(n) ((n) - 1)
/*
* Firmware expects 1 + n - 2, where n is the length of the option vector in
* bytes. The 1 accounts for the length byte itself, the - 2 .. ?
*/
#define VECTOR_LENGTH(n) (1 + (n) - 2)
struct option_vector1 {
u8 byte1;
u8 arch_versions;
u8 arch_versions3;
} __packed;
struct option_vector2 {
u8 byte1;
__be16 reserved;
__be32 real_base;
__be32 real_size;
__be32 virt_base;
__be32 virt_size;
__be32 load_base;
__be32 min_rma;
__be32 min_load;
u8 min_rma_percent;
u8 max_pft_size;
} __packed;
struct option_vector3 {
u8 byte1;
u8 byte2;
} __packed;
struct option_vector4 {
u8 byte1;
u8 min_vp_cap;
} __packed;
struct option_vector5 {
u8 byte1;
u8 byte2;
u8 byte3;
u8 cmo;
u8 associativity;
u8 bin_opts;
u8 micro_checkpoint;
u8 reserved0;
__be32 max_cpus;
__be16 papr_level;
__be16 reserved1;
u8 platform_facilities;
u8 reserved2;
__be16 reserved3;
u8 subprocessors;
u8 byte22;
u8 intarch;
u8 mmu;
u8 hash_ext;
u8 radix_ext;
} __packed;
struct option_vector6 {
u8 reserved;
u8 secondary_pteg;
u8 os_name;
} __packed;
struct ibm_arch_vec {
struct { u32 mask, val; } pvrs[12];
u8 num_vectors;
u8 vec1_len;
struct option_vector1 vec1;
u8 vec2_len;
struct option_vector2 vec2;
u8 vec3_len;
struct option_vector3 vec3;
u8 vec4_len;
struct option_vector4 vec4;
u8 vec5_len;
struct option_vector5 vec5;
u8 vec6_len;
struct option_vector6 vec6;
} __packed;
static const struct ibm_arch_vec ibm_architecture_vec_template __initconst = {
.pvrs = {
{
.mask = cpu_to_be32(0xfffe0000), /* POWER5/POWER5+ */
.val = cpu_to_be32(0x003a0000),
},
{
.mask = cpu_to_be32(0xffff0000), /* POWER6 */
.val = cpu_to_be32(0x003e0000),
},
{
.mask = cpu_to_be32(0xffff0000), /* POWER7 */
.val = cpu_to_be32(0x003f0000),
},
{
.mask = cpu_to_be32(0xffff0000), /* POWER8E */
.val = cpu_to_be32(0x004b0000),
},
{
.mask = cpu_to_be32(0xffff0000), /* POWER8NVL */
.val = cpu_to_be32(0x004c0000),
},
{
.mask = cpu_to_be32(0xffff0000), /* POWER8 */
.val = cpu_to_be32(0x004d0000),
},
{
.mask = cpu_to_be32(0xffff0000), /* POWER9 */
.val = cpu_to_be32(0x004e0000),
},
{
.mask = cpu_to_be32(0xffffffff), /* all 3.00-compliant */
.val = cpu_to_be32(0x0f000005),
},
{
.mask = cpu_to_be32(0xffffffff), /* all 2.07-compliant */
.val = cpu_to_be32(0x0f000004),
},
{
.mask = cpu_to_be32(0xffffffff), /* all 2.06-compliant */
.val = cpu_to_be32(0x0f000003),
},
{
.mask = cpu_to_be32(0xffffffff), /* all 2.05-compliant */
.val = cpu_to_be32(0x0f000002),
},
{
.mask = cpu_to_be32(0xfffffffe), /* all 2.04-compliant and earlier */
.val = cpu_to_be32(0x0f000001),
},
},
.num_vectors = NUM_VECTORS(6),
.vec1_len = VECTOR_LENGTH(sizeof(struct option_vector1)),
.vec1 = {
.byte1 = 0,
.arch_versions = OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
.arch_versions3 = OV1_PPC_3_00,
},
.vec2_len = VECTOR_LENGTH(sizeof(struct option_vector2)),
/* option vector 2: Open Firmware options supported */
.vec2 = {
.byte1 = OV2_REAL_MODE,
.reserved = 0,
.real_base = cpu_to_be32(0xffffffff),
.real_size = cpu_to_be32(0xffffffff),
.virt_base = cpu_to_be32(0xffffffff),
.virt_size = cpu_to_be32(0xffffffff),
.load_base = cpu_to_be32(0xffffffff),
.min_rma = cpu_to_be32(512), /* 512MB min RMA */
.min_load = cpu_to_be32(0xffffffff), /* full client load */
.min_rma_percent = 0, /* min RMA percentage of total RAM */
.max_pft_size = 48, /* max log_2(hash table size) */
},
.vec3_len = VECTOR_LENGTH(sizeof(struct option_vector3)),
/* option vector 3: processor options supported */
.vec3 = {
.byte1 = 0, /* don't ignore, don't halt */
.byte2 = OV3_FP | OV3_VMX | OV3_DFP,
},
.vec4_len = VECTOR_LENGTH(sizeof(struct option_vector4)),
/* option vector 4: IBM PAPR implementation */
.vec4 = {
.byte1 = 0, /* don't halt */
.min_vp_cap = OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */
},
.vec5_len = VECTOR_LENGTH(sizeof(struct option_vector5)),
/* option vector 5: PAPR/OF options */
.vec5 = {
.byte1 = 0, /* don't ignore, don't halt */
.byte2 = OV5_FEAT(OV5_LPAR) | OV5_FEAT(OV5_SPLPAR) | OV5_FEAT(OV5_LARGE_PAGES) |
OV5_FEAT(OV5_DRCONF_MEMORY) | OV5_FEAT(OV5_DONATE_DEDICATE_CPU) |
#ifdef CONFIG_PCI_MSI
/* PCIe/MSI support. Without MSI full PCIe is not supported */
OV5_FEAT(OV5_MSI),
#else
0,
#endif
.byte3 = 0,
.cmo =
#ifdef CONFIG_PPC_SMLPAR
OV5_FEAT(OV5_CMO) | OV5_FEAT(OV5_XCMO),
#else
0,
#endif
.associativity = OV5_FEAT(OV5_TYPE1_AFFINITY) | OV5_FEAT(OV5_PRRN),
.bin_opts = OV5_FEAT(OV5_RESIZE_HPT) | OV5_FEAT(OV5_HP_EVT),
.micro_checkpoint = 0,
.reserved0 = 0,
.max_cpus = cpu_to_be32(NR_CPUS), /* number of cores supported */
.papr_level = 0,
.reserved1 = 0,
.platform_facilities = OV5_FEAT(OV5_PFO_HW_RNG) | OV5_FEAT(OV5_PFO_HW_ENCR) | OV5_FEAT(OV5_PFO_HW_842),
.reserved2 = 0,
.reserved3 = 0,
.subprocessors = 1,
.byte22 = OV5_FEAT(OV5_DRMEM_V2),
.intarch = 0,
.mmu = 0,
.hash_ext = 0,
.radix_ext = 0,
},
/* option vector 6: IBM PAPR hints */
.vec6_len = VECTOR_LENGTH(sizeof(struct option_vector6)),
.vec6 = {
.reserved = 0,
.secondary_pteg = 0,
.os_name = OV6_LINUX,
},
};
static struct ibm_arch_vec __prombss ibm_architecture_vec ____cacheline_aligned;
/* Old method - ELF header with PT_NOTE sections only works on BE */
#ifdef __BIG_ENDIAN__
static const struct fake_elf {
Elf32_Ehdr elfhdr;
Elf32_Phdr phdr[2];
struct chrpnote {
u32 namesz;
u32 descsz;
u32 type;
char name[8]; /* "PowerPC" */
struct chrpdesc {
u32 real_mode;
u32 real_base;
u32 real_size;
u32 virt_base;
u32 virt_size;
u32 load_base;
} chrpdesc;
} chrpnote;
struct rpanote {
u32 namesz;
u32 descsz;
u32 type;
char name[24]; /* "IBM,RPA-Client-Config" */
struct rpadesc {
u32 lpar_affinity;
u32 min_rmo_size;
u32 min_rmo_percent;
u32 max_pft_size;
u32 splpar;
u32 min_load;
u32 new_mem_def;
u32 ignore_me;
} rpadesc;
} rpanote;
} fake_elf __initconst = {
.elfhdr = {
.e_ident = { 0x7f, 'E', 'L', 'F',
ELFCLASS32, ELFDATA2MSB, EV_CURRENT },
.e_type = ET_EXEC, /* yeah right */
.e_machine = EM_PPC,
.e_version = EV_CURRENT,
.e_phoff = offsetof(struct fake_elf, phdr),
.e_phentsize = sizeof(Elf32_Phdr),
.e_phnum = 2
},
.phdr = {
[0] = {
.p_type = PT_NOTE,
.p_offset = offsetof(struct fake_elf, chrpnote),
.p_filesz = sizeof(struct chrpnote)
}, [1] = {
.p_type = PT_NOTE,
.p_offset = offsetof(struct fake_elf, rpanote),
.p_filesz = sizeof(struct rpanote)
}
},
.chrpnote = {
.namesz = sizeof("PowerPC"),
.descsz = sizeof(struct chrpdesc),
.type = 0x1275,
.name = "PowerPC",
.chrpdesc = {
.real_mode = ~0U, /* ~0 means "don't care" */
.real_base = ~0U,
.real_size = ~0U,
.virt_base = ~0U,
.virt_size = ~0U,
.load_base = ~0U
},
},
.rpanote = {
.namesz = sizeof("IBM,RPA-Client-Config"),
.descsz = sizeof(struct rpadesc),
.type = 0x12759999,
.name = "IBM,RPA-Client-Config",
.rpadesc = {
.lpar_affinity = 0,
.min_rmo_size = 64, /* in megabytes */
.min_rmo_percent = 0,
.max_pft_size = 48, /* 2^48 bytes max PFT size */
.splpar = 1,
.min_load = ~0U,
.new_mem_def = 0
}
}
};
#endif /* __BIG_ENDIAN__ */
static int __init prom_count_smt_threads(void)
{
phandle node;
char type[64];
unsigned int plen;
/* Pick up th first CPU node we can find */
for (node = 0; prom_next_node(&node); ) {
type[0] = 0;
prom_getprop(node, "device_type", type, sizeof(type));
if (prom_strcmp(type, "cpu"))
continue;
/*
* There is an entry for each smt thread, each entry being
* 4 bytes long. All cpus should have the same number of
* smt threads, so return after finding the first.
*/
plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s");
if (plen == PROM_ERROR)
break;
plen >>= 2;
prom_debug("Found %lu smt threads per core\n", (unsigned long)plen);
/* Sanity check */
if (plen < 1 || plen > 64) {
prom_printf("Threads per core %lu out of bounds, assuming 1\n",
(unsigned long)plen);
return 1;
}
return plen;
}
prom_debug("No threads found, assuming 1 per core\n");
return 1;
}
static void __init prom_parse_mmu_model(u8 val,
struct platform_support *support)
{
switch (val) {
case OV5_FEAT(OV5_MMU_DYNAMIC):
case OV5_FEAT(OV5_MMU_EITHER): /* Either Available */
prom_debug("MMU - either supported\n");
support->radix_mmu = !prom_radix_disable;
support->hash_mmu = true;
break;
case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */
prom_debug("MMU - radix only\n");
if (prom_radix_disable) {
/*
* If we __have__ to do radix, we're better off ignoring
* the command line rather than not booting.
*/
prom_printf("WARNING: Ignoring cmdline option disable_radix\n");
}
support->radix_mmu = true;
break;
case OV5_FEAT(OV5_MMU_HASH):
prom_debug("MMU - hash only\n");
support->hash_mmu = true;
break;
default:
prom_debug("Unknown mmu support option: 0x%x\n", val);
break;
}
}
static void __init prom_parse_xive_model(u8 val,
struct platform_support *support)
{
switch (val) {
case OV5_FEAT(OV5_XIVE_EITHER): /* Either Available */
prom_debug("XIVE - either mode supported\n");
support->xive = !prom_xive_disable;
break;
case OV5_FEAT(OV5_XIVE_EXPLOIT): /* Only Exploitation mode */
prom_debug("XIVE - exploitation mode supported\n");
if (prom_xive_disable) {
/*
* If we __have__ to do XIVE, we're better off ignoring
* the command line rather than not booting.
*/
prom_printf("WARNING: Ignoring cmdline option xive=off\n");
}
support->xive = true;
break;
case OV5_FEAT(OV5_XIVE_LEGACY): /* Only Legacy mode */
prom_debug("XIVE - legacy mode supported\n");
break;
default:
prom_debug("Unknown xive support option: 0x%x\n", val);
break;
}
}
static void __init prom_parse_platform_support(u8 index, u8 val,
struct platform_support *support)
{
switch (index) {
case OV5_INDX(OV5_MMU_SUPPORT): /* MMU Model */
prom_parse_mmu_model(val & OV5_FEAT(OV5_MMU_SUPPORT), support);
break;
case OV5_INDX(OV5_RADIX_GTSE): /* Radix Extensions */
if (val & OV5_FEAT(OV5_RADIX_GTSE)) {
prom_debug("Radix - GTSE supported\n");
support->radix_gtse = true;
}
break;
case OV5_INDX(OV5_XIVE_SUPPORT): /* Interrupt mode */
prom_parse_xive_model(val & OV5_FEAT(OV5_XIVE_SUPPORT),
support);
break;
}
}
static void __init prom_check_platform_support(void)
{
struct platform_support supported = {
.hash_mmu = false,
.radix_mmu = false,
.radix_gtse = false,
.xive = false
};
int prop_len = prom_getproplen(prom.chosen,
"ibm,arch-vec-5-platform-support");
/*
* First copy the architecture vec template
*
* use memcpy() instead of *vec = *vec_template so that GCC replaces it
* by __memcpy() when KASAN is active
*/
memcpy(&ibm_architecture_vec, &ibm_architecture_vec_template,
sizeof(ibm_architecture_vec));
if (prop_len > 1) {
int i;
u8 vec[8];
prom_debug("Found ibm,arch-vec-5-platform-support, len: %d\n",
prop_len);
if (prop_len > sizeof(vec))
prom_printf("WARNING: ibm,arch-vec-5-platform-support longer than expected (len: %d)\n",
prop_len);
prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support",
&vec, sizeof(vec));
for (i = 0; i < sizeof(vec); i += 2) {
prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2
, vec[i]
, vec[i + 1]);
prom_parse_platform_support(vec[i], vec[i + 1],
&supported);
}
}
if (supported.radix_mmu && supported.radix_gtse &&
IS_ENABLED(CONFIG_PPC_RADIX_MMU)) {
/* Radix preferred - but we require GTSE for now */
prom_debug("Asking for radix with GTSE\n");
ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_RADIX);
ibm_architecture_vec.vec5.radix_ext = OV5_FEAT(OV5_RADIX_GTSE);
} else if (supported.hash_mmu) {
/* Default to hash mmu (if we can) */
prom_debug("Asking for hash\n");
ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_HASH);
} else {
/* We're probably on a legacy hypervisor */
prom_debug("Assuming legacy hash support\n");
}
if (supported.xive) {
prom_debug("Asking for XIVE\n");
ibm_architecture_vec.vec5.intarch = OV5_FEAT(OV5_XIVE_EXPLOIT);
}
}
static void __init prom_send_capabilities(void)
{
ihandle root;
prom_arg_t ret;
u32 cores;
/* Check ibm,arch-vec-5-platform-support and fixup vec5 if required */
prom_check_platform_support();
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
/* We need to tell the FW about the number of cores we support.
*
* To do that, we count the number of threads on the first core
* (we assume this is the same for all cores) and use it to
* divide NR_CPUS.
*/
cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
prom_printf("Max number of cores passed to firmware: %u (NR_CPUS = %d)\n",
cores, NR_CPUS);
ibm_architecture_vec.vec5.max_cpus = cpu_to_be32(cores);
/* try calling the ibm,client-architecture-support method */
prom_printf("Calling ibm,client-architecture-support...");
if (call_prom_ret("call-method", 3, 2, &ret,
ADDR("ibm,client-architecture-support"),
root,
ADDR(&ibm_architecture_vec)) == 0) {
/* the call exists... */
if (ret)
prom_printf("\nWARNING: ibm,client-architecture"
"-support call FAILED!\n");
call_prom("close", 1, 0, root);
prom_printf(" done\n");
return;
}
call_prom("close", 1, 0, root);
prom_printf(" not implemented\n");
}
#ifdef __BIG_ENDIAN__
{
ihandle elfloader;
/* no ibm,client-architecture-support call, try the old way */
elfloader = call_prom("open", 1, 1,
ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");
return;
}
call_prom("call-method", 3, 1, ADDR("process-elf-header"),
elfloader, ADDR(&fake_elf));
call_prom("close", 1, 0, elfloader);
}
#endif /* __BIG_ENDIAN__ */
}
#endif /* CONFIG_PPC_PSERIES */
/*
* Memory allocation strategy... our layout is normally:
*
* at 14Mb or more we have vmlinux, then a gap and initrd. In some
* rare cases, initrd might end up being before the kernel though.
* We assume this won't override the final kernel at 0, we have no
* provision to handle that in this version, but it should hopefully
* never happen.
*
* alloc_top is set to the top of RMO, eventually shrink down if the
* TCEs overlap
*
* alloc_bottom is set to the top of kernel/initrd
*
* from there, allocations are done this way : rtas is allocated
* topmost, and the device-tree is allocated from the bottom. We try
* to grow the device-tree allocation as we progress. If we can't,
* then we fail, we don't currently have a facility to restart
* elsewhere, but that shouldn't be necessary.
*
* Note that calls to reserve_mem have to be done explicitly, memory
* allocated with either alloc_up or alloc_down isn't automatically
* reserved.
*/
/*
* Allocates memory in the RMO upward from the kernel/initrd
*
* When align is 0, this is a special case, it means to allocate in place
* at the current location of alloc_bottom or fail (that is basically
* extending the previous allocation). Used for the device-tree flattening
*/
static unsigned long __init alloc_up(unsigned long size, unsigned long align)
{
unsigned long base = alloc_bottom;
unsigned long addr = 0;
if (align)
base = _ALIGN_UP(base, align);
prom_debug("%s(%lx, %lx)\n", __func__, size, align);
if (ram_top == 0)
prom_panic("alloc_up() called with mem not initialized\n");
if (align)
base = _ALIGN_UP(alloc_bottom, align);
else
base = alloc_bottom;
for(; (base + size) <= alloc_top;
base = _ALIGN_UP(base + 0x100000, align)) {
prom_debug(" trying: 0x%lx\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
if (addr != PROM_ERROR && addr != 0)
break;
addr = 0;
if (align == 0)
break;
}
if (addr == 0)
return 0;
alloc_bottom = addr + size;
prom_debug(" -> %lx\n", addr);
prom_debug(" alloc_bottom : %lx\n", alloc_bottom);
prom_debug(" alloc_top : %lx\n", alloc_top);
prom_debug(" alloc_top_hi : %lx\n", alloc_top_high);
prom_debug(" rmo_top : %lx\n", rmo_top);
prom_debug(" ram_top : %lx\n", ram_top);
return addr;
}
/*
* Allocates memory downward, either from top of RMO, or if highmem
* is set, from the top of RAM. Note that this one doesn't handle
* failures. It does claim memory if highmem is not set.
*/
static unsigned long __init alloc_down(unsigned long size, unsigned long align,
int highmem)
{
unsigned long base, addr = 0;
prom_debug("%s(%lx, %lx, %s)\n", __func__, size, align,
highmem ? "(high)" : "(low)");
if (ram_top == 0)
prom_panic("alloc_down() called with mem not initialized\n");
if (highmem) {
/* Carve out storage for the TCE table. */
addr = _ALIGN_DOWN(alloc_top_high - size, align);
if (addr <= alloc_bottom)
return 0;
/* Will we bump into the RMO ? If yes, check out that we
* didn't overlap existing allocations there, if we did,
* we are dead, we must be the first in town !
*/
if (addr < rmo_top) {
/* Good, we are first */
if (alloc_top == rmo_top)
alloc_top = rmo_top = addr;
else
return 0;
}
alloc_top_high = addr;
goto bail;
}
base = _ALIGN_DOWN(alloc_top - size, align);
for (; base > alloc_bottom;
base = _ALIGN_DOWN(base - 0x100000, align)) {
prom_debug(" trying: 0x%lx\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
if (addr != PROM_ERROR && addr != 0)
break;
addr = 0;
}
if (addr == 0)
return 0;
alloc_top = addr;
bail:
prom_debug(" -> %lx\n", addr);
prom_debug(" alloc_bottom : %lx\n", alloc_bottom);
prom_debug(" alloc_top : %lx\n", alloc_top);
prom_debug(" alloc_top_hi : %lx\n", alloc_top_high);
prom_debug(" rmo_top : %lx\n", rmo_top);
prom_debug(" ram_top : %lx\n", ram_top);
return addr;
}
/*
* Parse a "reg" cell
*/
static unsigned long __init prom_next_cell(int s, cell_t **cellp)
{
cell_t *p = *cellp;
unsigned long r = 0;
/* Ignore more than 2 cells */
while (s > sizeof(unsigned long) / 4) {
p++;
s--;
}
r = be32_to_cpu(*p++);
#ifdef CONFIG_PPC64
if (s > 1) {
r <<= 32;
r |= be32_to_cpu(*(p++));
}
#endif
*cellp = p;
return r;
}
/*
* Very dumb function for adding to the memory reserve list, but
* we don't need anything smarter at this point
*
* XXX Eventually check for collisions. They should NEVER happen.
* If problems seem to show up, it would be a good start to track
* them down.
*/
static void __init reserve_mem(u64 base, u64 size)
{
u64 top = base + size;
unsigned long cnt = mem_reserve_cnt;
if (size == 0)
return;
/* We need to always keep one empty entry so that we
* have our terminator with "size" set to 0 since we are
* dumb and just copy this entire array to the boot params
*/
base = _ALIGN_DOWN(base, PAGE_SIZE);
top = _ALIGN_UP(top, PAGE_SIZE);
size = top - base;
if (cnt >= (MEM_RESERVE_MAP_SIZE - 1))
prom_panic("Memory reserve map exhausted !\n");
mem_reserve_map[cnt].base = cpu_to_be64(base);
mem_reserve_map[cnt].size = cpu_to_be64(size);
mem_reserve_cnt = cnt + 1;
}
/*
* Initialize memory allocation mechanism, parse "memory" nodes and
* obtain that way the top of memory and RMO to setup out local allocator
*/
static void __init prom_init_mem(void)
{
phandle node;
char type[64];
unsigned int plen;
cell_t *p, *endp;
__be32 val;
u32 rac, rsc;
/*
* We iterate the memory nodes to find
* 1) top of RMO (first node)
* 2) top of memory
*/
val = cpu_to_be32(2);
prom_getprop(prom.root, "#address-cells", &val, sizeof(val));
rac = be32_to_cpu(val);
val = cpu_to_be32(1);
prom_getprop(prom.root, "#size-cells", &val, sizeof(rsc));
rsc = be32_to_cpu(val);
prom_debug("root_addr_cells: %x\n", rac);
prom_debug("root_size_cells: %x\n", rsc);
prom_debug("scanning memory:\n");
for (node = 0; prom_next_node(&node); ) {
type[0] = 0;
prom_getprop(node, "device_type", type, sizeof(type));
if (type[0] == 0) {
/*
* CHRP Longtrail machines have no device_type
* on the memory node, so check the name instead...
*/
prom_getprop(node, "name", type, sizeof(type));
}
if (prom_strcmp(type, "memory"))
continue;
plen = prom_getprop(node, "reg", regbuf, sizeof(regbuf));
if (plen > sizeof(regbuf)) {
prom_printf("memory node too large for buffer !\n");
plen = sizeof(regbuf);
}
p = regbuf;
endp = p + (plen / sizeof(cell_t));
#ifdef DEBUG_PROM
memset(prom_scratch, 0, sizeof(prom_scratch));
call_prom("package-to-path", 3, 1, node, prom_scratch,
sizeof(prom_scratch) - 1);
prom_debug(" node %s :\n", prom_scratch);
#endif /* DEBUG_PROM */
while ((endp - p) >= (rac + rsc)) {
unsigned long base, size;
base = prom_next_cell(rac, &p);
size = prom_next_cell(rsc, &p);
if (size == 0)
continue;
prom_debug(" %lx %lx\n", base, size);
if (base == 0 && (of_platform & PLATFORM_LPAR))
rmo_top = size;
if ((base + size) > ram_top)
ram_top = base + size;
}
}
alloc_bottom = PAGE_ALIGN((unsigned long)&_end + 0x4000);
/*
* If prom_memory_limit is set we reduce the upper limits *except* for
* alloc_top_high. This must be the real top of RAM so we can put
* TCE's up there.
*/
alloc_top_high = ram_top;
if (prom_memory_limit) {
if (prom_memory_limit <= alloc_bottom) {
prom_printf("Ignoring mem=%lx <= alloc_bottom.\n",
prom_memory_limit);
prom_memory_limit = 0;
} else if (prom_memory_limit >= ram_top) {
prom_printf("Ignoring mem=%lx >= ram_top.\n",
prom_memory_limit);
prom_memory_limit = 0;
} else {
ram_top = prom_memory_limit;
rmo_top = min(rmo_top, prom_memory_limit);
}
}
/*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
* Some RS64 machines have buggy firmware where claims up at
* 1GB fail. Cap at 768MB as a workaround.
* Since 768MB is plenty of room, and we need to cap to something
* reasonable on 32-bit, cap at 768MB on all machines.
*/
if (!rmo_top)
rmo_top = ram_top;
rmo_top = min(0x30000000ul, rmo_top);
alloc_top = rmo_top;
alloc_top_high = ram_top;
/*
* Check if we have an initrd after the kernel but still inside
* the RMO. If we do move our bottom point to after it.
*/
if (prom_initrd_start &&
prom_initrd_start < rmo_top &&
prom_initrd_end > alloc_bottom)
alloc_bottom = PAGE_ALIGN(prom_initrd_end);
prom_printf("memory layout at init:\n");
prom_printf(" memory_limit : %lx (16 MB aligned)\n",
prom_memory_limit);
prom_printf(" alloc_bottom : %lx\n", alloc_bottom);
prom_printf(" alloc_top : %lx\n", alloc_top);
prom_printf(" alloc_top_hi : %lx\n", alloc_top_high);
prom_printf(" rmo_top : %lx\n", rmo_top);
prom_printf(" ram_top : %lx\n", ram_top);
}
static void __init prom_close_stdin(void)
{
__be32 val;
ihandle stdin;
if (prom_getprop(prom.chosen, "stdin", &val, sizeof(val)) > 0) {
stdin = be32_to_cpu(val);
call_prom("close", 1, 0, stdin);
}
}
/*
* Allocate room for and instantiate RTAS
*/
static void __init prom_instantiate_rtas(void)
{
phandle rtas_node;
ihandle rtas_inst;
u32 base, entry = 0;
__be32 val;
u32 size = 0;
prom_debug("prom_instantiate_rtas: start...\n");
rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
prom_debug("rtas_node: %x\n", rtas_node);
if (!PHANDLE_VALID(rtas_node))
return;
val = 0;
prom_getprop(rtas_node, "rtas-size", &val, sizeof(size));
size = be32_to_cpu(val);
if (size == 0)
return;
base = alloc_down(size, PAGE_SIZE, 0);
if (base == 0)
prom_panic("Could not allocate memory for RTAS\n");
rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
if (!IHANDLE_VALID(rtas_inst)) {
prom_printf("opening rtas package failed (%x)\n", rtas_inst);
return;
}
prom_printf("instantiating rtas at 0x%x...", base);
if (call_prom_ret("call-method", 3, 2, &entry,
ADDR("instantiate-rtas"),
rtas_inst, base) != 0
|| entry == 0) {
prom_printf(" failed\n");
return;
}
prom_printf(" done\n");
reserve_mem(base, size);
val = cpu_to_be32(base);
prom_setprop(rtas_node, "/rtas", "linux,rtas-base",
&val, sizeof(val));
val = cpu_to_be32(entry);
prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
&val, sizeof(val));
/* Check if it supports "query-cpu-stopped-state" */
if (prom_getprop(rtas_node, "query-cpu-stopped-state",
&val, sizeof(val)) != PROM_ERROR)
rtas_has_query_cpu_stopped = true;
prom_debug("rtas base = 0x%x\n", base);
prom_debug("rtas entry = 0x%x\n", entry);
prom_debug("rtas size = 0x%x\n", size);
prom_debug("prom_instantiate_rtas: end...\n");
}
#ifdef CONFIG_PPC64
/*
* Allocate room for and instantiate Stored Measurement Log (SML)
*/
static void __init prom_instantiate_sml(void)
{
phandle ibmvtpm_node;
ihandle ibmvtpm_inst;
u32 entry = 0, size = 0, succ = 0;
u64 base;
__be32 val;
prom_debug("prom_instantiate_sml: start...\n");
ibmvtpm_node = call_prom("finddevice", 1, 1, ADDR("/vdevice/vtpm"));
prom_debug("ibmvtpm_node: %x\n", ibmvtpm_node);
if (!PHANDLE_VALID(ibmvtpm_node))
return;
ibmvtpm_inst = call_prom("open", 1, 1, ADDR("/vdevice/vtpm"));
if (!IHANDLE_VALID(ibmvtpm_inst)) {
prom_printf("opening vtpm package failed (%x)\n", ibmvtpm_inst);
return;
}
if (prom_getprop(ibmvtpm_node, "ibm,sml-efi-reformat-supported",
&val, sizeof(val)) != PROM_ERROR) {
if (call_prom_ret("call-method", 2, 2, &succ,
ADDR("reformat-sml-to-efi-alignment"),
ibmvtpm_inst) != 0 || succ == 0) {
prom_printf("Reformat SML to EFI alignment failed\n");
return;
}
if (call_prom_ret("call-method", 2, 2, &size,
ADDR("sml-get-allocated-size"),
ibmvtpm_inst) != 0 || size == 0) {
prom_printf("SML get allocated size failed\n");
return;
}
} else {
if (call_prom_ret("call-method", 2, 2, &size,
ADDR("sml-get-handover-size"),
ibmvtpm_inst) != 0 || size == 0) {
prom_printf("SML get handover size failed\n");
return;
}
}
base = alloc_down(size, PAGE_SIZE, 0);
if (base == 0)
prom_panic("Could not allocate memory for sml\n");
prom_printf("instantiating sml at 0x%llx...", base);
memset((void *)base, 0, size);
if (call_prom_ret("call-method", 4, 2, &entry,
ADDR("sml-handover"),
ibmvtpm_inst, size, base) != 0 || entry == 0) {
prom_printf("SML handover failed\n");
return;
}
prom_printf(" done\n");
reserve_mem(base, size);
prom_setprop(ibmvtpm_node, "/vdevice/vtpm", "linux,sml-base",
&base, sizeof(base));
prom_setprop(ibmvtpm_node, "/vdevice/vtpm", "linux,sml-size",
&size, sizeof(size));
prom_debug("sml base = 0x%llx\n", base);
prom_debug("sml size = 0x%x\n", size);
prom_debug("prom_instantiate_sml: end...\n");
}
/*
* Allocate room for and initialize TCE tables
*/
#ifdef __BIG_ENDIAN__
static void __init prom_initialize_tce_table(void)
{
phandle node;
ihandle phb_node;
char compatible[64], type[64], model[64];
char *path = prom_scratch;
u64 base, align;
u32 minalign, minsize;
u64 tce_entry, *tce_entryp;
u64 local_alloc_top, local_alloc_bottom;
u64 i;
if (prom_iommu_off)
return;
prom_debug("starting prom_initialize_tce_table\n");
/* Cache current top of allocs so we reserve a single block */
local_alloc_top = alloc_top_high;
local_alloc_bottom = local_alloc_top;
/* Search all nodes looking for PHBs. */
for (node = 0; prom_next_node(&node); ) {
compatible[0] = 0;
type[0] = 0;
model[0] = 0;
prom_getprop(node, "compatible",
compatible, sizeof(compatible));
prom_getprop(node, "device_type", type, sizeof(type));
prom_getprop(node, "model", model, sizeof(model));
if ((type[0] == 0) || (prom_strstr(type, "pci") == NULL))
continue;
/* Keep the old logic intact to avoid regression. */
if (compatible[0] != 0) {
if ((prom_strstr(compatible, "python") == NULL) &&
(prom_strstr(compatible, "Speedwagon") == NULL) &&
(prom_strstr(compatible, "Winnipeg") == NULL))
continue;
} else if (model[0] != 0) {
if ((prom_strstr(model, "ython") == NULL) &&
(prom_strstr(model, "peedwagon") == NULL) &&
(prom_strstr(model, "innipeg") == NULL))
continue;
}
if (prom_getprop(node, "tce-table-minalign", &minalign,
sizeof(minalign)) == PROM_ERROR)
minalign = 0;
if (prom_getprop(node, "tce-table-minsize", &minsize,
sizeof(minsize)) == PROM_ERROR)
minsize = 4UL << 20;
/*
* Even though we read what OF wants, we just set the table
* size to 4 MB. This is enough to map 2GB of PCI DMA space.
* By doing this, we avoid the pitfalls of trying to DMA to
* MMIO space and the DMA alias hole.
*/
minsize = 4UL << 20;
/* Align to the greater of the align or size */
align = max(minalign, minsize);
base = alloc_down(minsize, align, 1);
if (base == 0)
prom_panic("ERROR, cannot find space for TCE table.\n");
if (base < local_alloc_bottom)
local_alloc_bottom = base;
/* It seems OF doesn't null-terminate the path :-( */
memset(path, 0, sizeof(prom_scratch));
/* Call OF to setup the TCE hardware */
if (call_prom("package-to-path", 3, 1, node,
path, sizeof(prom_scratch) - 1) == PROM_ERROR) {
prom_printf("package-to-path failed\n");
}
/* Save away the TCE table attributes for later use. */
prom_setprop(node, path, "linux,tce-base", &base, sizeof(base));
prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize));
prom_debug("TCE table: %s\n", path);
prom_debug("\tnode = 0x%x\n", node);
prom_debug("\tbase = 0x%llx\n", base);
prom_debug("\tsize = 0x%x\n", minsize);
/* Initialize the table to have a one-to-one mapping
* over the allocated size.
*/
tce_entryp = (u64 *)base;
for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) {
tce_entry = (i << PAGE_SHIFT);
tce_entry |= 0x3;
*tce_entryp = tce_entry;
}
prom_printf("opening PHB %s", path);
phb_node = call_prom("open", 1, 1, path);
if (phb_node == 0)
prom_printf("... failed\n");
else
prom_printf("... done\n");
call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"),
phb_node, -1, minsize,
(u32) base, (u32) (base >> 32));
call_prom("close", 1, 0, phb_node);
}
reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom);
/* These are only really needed if there is a memory limit in
* effect, but we don't know so export them always. */
prom_tce_alloc_start = local_alloc_bottom;
prom_tce_alloc_end = local_alloc_top;
/* Flag the first invalid entry */
prom_debug("ending prom_initialize_tce_table\n");
}
#endif /* __BIG_ENDIAN__ */
#endif /* CONFIG_PPC64 */
/*
* With CHRP SMP we need to use the OF to start the other processors.
* We can't wait until smp_boot_cpus (the OF is trashed by then)
* so we have to put the processors into a holding pattern controlled
* by the kernel (not OF) before we destroy the OF.
*
* This uses a chunk of low memory, puts some holding pattern
* code there and sends the other processors off to there until
* smp_boot_cpus tells them to do something. The holding pattern
* checks that address until its cpu # is there, when it is that
* cpu jumps to __secondary_start(). smp_boot_cpus() takes care
* of setting those values.
*
* We also use physical address 0x4 here to tell when a cpu
* is in its holding pattern code.
*
* -- Cort
*/
/*
* We want to reference the copy of __secondary_hold_* in the
* 0 - 0x100 address range
*/
#define LOW_ADDR(x) (((unsigned long) &(x)) & 0xff)
static void __init prom_hold_cpus(void)
{
unsigned long i;
phandle node;
char type[64];
unsigned long *spinloop
= (void *) LOW_ADDR(__secondary_hold_spinloop);
unsigned long *acknowledge
= (void *) LOW_ADDR(__secondary_hold_acknowledge);
unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
/*
* On pseries, if RTAS supports "query-cpu-stopped-state",
* we skip this stage, the CPUs will be started by the
* kernel using RTAS.
*/
if ((of_platform == PLATFORM_PSERIES ||
of_platform == PLATFORM_PSERIES_LPAR) &&
rtas_has_query_cpu_stopped) {
prom_printf("prom_hold_cpus: skipped\n");
return;
}
prom_debug("prom_hold_cpus: start...\n");
prom_debug(" 1) spinloop = 0x%lx\n", (unsigned long)spinloop);
prom_debug(" 1) *spinloop = 0x%lx\n", *spinloop);
prom_debug(" 1) acknowledge = 0x%lx\n",
(unsigned long)acknowledge);
prom_debug(" 1) *acknowledge = 0x%lx\n", *acknowledge);
prom_debug(" 1) secondary_hold = 0x%lx\n", secondary_hold);
/* Set the common spinloop variable, so all of the secondary cpus
* will block when they are awakened from their OF spinloop.
* This must occur for both SMP and non SMP kernels, since OF will
* be trashed when we move the kernel.
*/
*spinloop = 0;
/* look for cpus */
for (node = 0; prom_next_node(&node); ) {
unsigned int cpu_no;
__be32 reg;
type[0] = 0;
prom_getprop(node, "device_type", type, sizeof(type));
if (prom_strcmp(type, "cpu") != 0)
continue;
/* Skip non-configured cpus. */
if (prom_getprop(node, "status", type, sizeof(type)) > 0)
if (prom_strcmp(type, "okay") != 0)
continue;
reg = cpu_to_be32(-1); /* make sparse happy */
prom_getprop(node, "reg", &reg, sizeof(reg));
cpu_no = be32_to_cpu(reg);
prom_debug("cpu hw idx = %u\n", cpu_no);
/* Init the acknowledge var which will be reset by
* the secondary cpu when it awakens from its OF
* spinloop.
*/
*acknowledge = (unsigned long)-1;
if (cpu_no != prom.cpu) {
/* Primary Thread of non-boot cpu or any thread */
prom_printf("starting cpu hw idx %u... ", cpu_no);
call_prom("start-cpu", 3, 0, node,
secondary_hold, cpu_no);
for (i = 0; (i < 100000000) &&
(*acknowledge == ((unsigned long)-1)); i++ )
mb();
if (*acknowledge == cpu_no)
prom_printf("done\n");
else
prom_printf("failed: %lx\n", *acknowledge);
}
#ifdef CONFIG_SMP
else
prom_printf("boot cpu hw idx %u\n", cpu_no);
#endif /* CONFIG_SMP */
}
prom_debug("prom_hold_cpus: end...\n");
}
static void __init prom_init_client_services(unsigned long pp)
{
/* Get a handle to the prom entry point before anything else */
prom_entry = pp;
/* get a handle for the stdout device */
prom.chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
if (!PHANDLE_VALID(prom.chosen))
prom_panic("cannot find chosen"); /* msg won't be printed :( */
/* get device tree root */
prom.root = call_prom("finddevice", 1, 1, ADDR("/"));
if (!PHANDLE_VALID(prom.root))
prom_panic("cannot find device tree root"); /* msg won't be printed :( */
prom.mmumap = 0;
}
#ifdef CONFIG_PPC32
/*
* For really old powermacs, we need to map things we claim.
* For that, we need the ihandle of the mmu.
* Also, on the longtrail, we need to work around other bugs.
*/
static void __init prom_find_mmu(void)
{
phandle oprom;
char version[64];
oprom = call_prom("finddevice", 1, 1, ADDR("/openprom"));
if (!PHANDLE_VALID(oprom))
return;
if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0)
return;
version[sizeof(version) - 1] = 0;
/* XXX might need to add other versions here */
if (prom_strcmp(version, "Open Firmware, 1.0.5") == 0)
of_workarounds = OF_WA_CLAIM;
else if (prom_strncmp(version, "FirmWorks,3.", 12) == 0) {
of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL;
call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
} else
return;
prom.memory = call_prom("open", 1, 1, ADDR("/memory"));
prom_getprop(prom.chosen, "mmu", &prom.mmumap,
sizeof(prom.mmumap));
prom.mmumap = be32_to_cpu(prom.mmumap);
if (!IHANDLE_VALID(prom.memory) || !IHANDLE_VALID(prom.mmumap))
of_workarounds &= ~OF_WA_CLAIM; /* hmmm */
}
#else
#define prom_find_mmu()
#endif
static void __init prom_init_stdout(void)
{
char *path = of_stdout_device;
char type[16];
phandle stdout_node;
__be32 val;
if (prom_getprop(prom.chosen, "stdout", &val, sizeof(val)) <= 0)
prom_panic("cannot find stdout");
prom.stdout = be32_to_cpu(val);
/* Get the full OF pathname of the stdout device */
memset(path, 0, 256);
call_prom("instance-to-path", 3, 1, prom.stdout, path, 255);
prom_printf("OF stdout device is: %s\n", of_stdout_device);
prom_setprop(prom.chosen, "/chosen", "linux,stdout-path",
path, prom_strlen(path) + 1);
/* instance-to-package fails on PA-Semi */
stdout_node = call_prom("instance-to-package", 1, 1, prom.stdout);
if (stdout_node != PROM_ERROR) {
val = cpu_to_be32(stdout_node);
/* If it's a display, note it */
memset(type, 0, sizeof(type));
prom_getprop(stdout_node, "device_type", type, sizeof(type));
if (prom_strcmp(type, "display") == 0)
prom_setprop(stdout_node, path, "linux,boot-display", NULL, 0);
}
}
static int __init prom_find_machine_type(void)
{
char compat[256];
int len, i = 0;
#ifdef CONFIG_PPC64
phandle rtas;
int x;
#endif
/* Look for a PowerMac or a Cell */
len = prom_getprop(prom.root, "compatible",
compat, sizeof(compat)-1);
if (len > 0) {
compat[len] = 0;
while (i < len) {
char *p = &compat[i];
int sl = prom_strlen(p);
if (sl == 0)
break;
if (prom_strstr(p, "Power Macintosh") ||
prom_strstr(p, "MacRISC"))
return PLATFORM_POWERMAC;
#ifdef CONFIG_PPC64
/* We must make sure we don't detect the IBM Cell
* blades as pSeries due to some firmware issues,
* so we do it here.
*/
if (prom_strstr(p, "IBM,CBEA") ||
prom_strstr(p, "IBM,CPBW-1.0"))
return PLATFORM_GENERIC;
#endif /* CONFIG_PPC64 */
i += sl + 1;
}
}
#ifdef CONFIG_PPC64
/* Try to figure out if it's an IBM pSeries or any other
* PAPR compliant platform. We assume it is if :
* - /device_type is "chrp" (please, do NOT use that for future
* non-IBM designs !
* - it has /rtas
*/
len = prom_getprop(prom.root, "device_type",
compat, sizeof(compat)-1);
if (len <= 0)
return PLATFORM_GENERIC;
if (prom_strcmp(compat, "chrp"))
return PLATFORM_GENERIC;
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
if (!PHANDLE_VALID(rtas))
return PLATFORM_GENERIC;
x = prom_getproplen(rtas, "ibm,hypertas-functions");
if (x != PROM_ERROR) {
prom_debug("Hypertas detected, assuming LPAR !\n");
return PLATFORM_PSERIES_LPAR;
}
return PLATFORM_PSERIES;
#else
return PLATFORM_GENERIC;
#endif
}
static int __init prom_set_color(ihandle ih, int i, int r, int g, int b)
{
return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r);
}
/*
* If we have a display that we don't know how to drive,
* we will want to try to execute OF's open method for it
* later. However, OF will probably fall over if we do that
* we've taken over the MMU.
* So we check whether we will need to open the display,
* and if so, open it now.
*/
static void __init prom_check_displays(void)
{
char type[16], *path;
phandle node;
ihandle ih;
int i;
static const unsigned char default_colors[] __initconst = {
0x00, 0x00, 0x00,
0x00, 0x00, 0xaa,
0x00, 0xaa, 0x00,
0x00, 0xaa, 0xaa,
0xaa, 0x00, 0x00,
0xaa, 0x00, 0xaa,
0xaa, 0xaa, 0x00,
0xaa, 0xaa, 0xaa,
0x55, 0x55, 0x55,
0x55, 0x55, 0xff,
0x55, 0xff, 0x55,
0x55, 0xff, 0xff,
0xff, 0x55, 0x55,
0xff, 0x55, 0xff,
0xff, 0xff, 0x55,
0xff, 0xff, 0xff
};
const unsigned char *clut;
prom_debug("Looking for displays\n");
for (node = 0; prom_next_node(&node); ) {
memset(type, 0, sizeof(type));
prom_getprop(node, "device_type", type, sizeof(type));
if (prom_strcmp(type, "display") != 0)
continue;
/* It seems OF doesn't null-terminate the path :-( */
path = prom_scratch;
memset(path, 0, sizeof(prom_scratch));
/*
* leave some room at the end of the path for appending extra
* arguments
*/
if (call_prom("package-to-path", 3, 1, node, path,
sizeof(prom_scratch) - 10) == PROM_ERROR)
continue;
prom_printf("found display : %s, opening... ", path);
ih = call_prom("open", 1, 1, path);
if (ih == 0) {
prom_printf("failed\n");
continue;
}
/* Success */
prom_printf("done\n");
prom_setprop(node, path, "linux,opened", NULL, 0);
/* Setup a usable color table when the appropriate
* method is available. Should update this to set-colors */
clut = default_colors;
for (i = 0; i < 16; i++, clut += 3)
if (prom_set_color(ih, i, clut[0], clut[1],
clut[2]) != 0)
break;
#ifdef CONFIG_LOGO_LINUX_CLUT224
clut = PTRRELOC(logo_linux_clut224.clut);
for (i = 0; i < logo_linux_clut224.clutsize; i++, clut += 3)
if (prom_set_color(ih, i + 32, clut[0], clut[1],
clut[2]) != 0)
break;
#endif /* CONFIG_LOGO_LINUX_CLUT224 */
#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
if (prom_getprop(node, "linux,boot-display", NULL, 0) !=
PROM_ERROR) {
u32 width, height, pitch, addr;
prom_printf("Setting btext !\n");
prom_getprop(node, "width", &width, 4);
prom_getprop(node, "height", &height, 4);
prom_getprop(node, "linebytes", &pitch, 4);
prom_getprop(node, "address", &addr, 4);
prom_printf("W=%d H=%d LB=%d addr=0x%x\n",
width, height, pitch, addr);
btext_setup_display(width, height, 8, pitch, addr);
btext_prepare_BAT();
}
#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
}
}
/* Return (relocated) pointer to this much memory: moves initrd if reqd. */
static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end,
unsigned long needed, unsigned long align)
{
void *ret;
*mem_start = _ALIGN(*mem_start, align);
while ((*mem_start + needed) > *mem_end) {
unsigned long room, chunk;
prom_debug("Chunk exhausted, claiming more at %lx...\n",
alloc_bottom);
room = alloc_top - alloc_bottom;
if (room > DEVTREE_CHUNK_SIZE)
room = DEVTREE_CHUNK_SIZE;
if (room < PAGE_SIZE)
prom_panic("No memory for flatten_device_tree "
"(no room)\n");
chunk = alloc_up(room, 0);
if (chunk == 0)
prom_panic("No memory for flatten_device_tree "
"(claim failed)\n");
*mem_end = chunk + room;
}
ret = (void *)*mem_start;
*mem_start += needed;
return ret;
}
#define dt_push_token(token, mem_start, mem_end) do { \
void *room = make_room(mem_start, mem_end, 4, 4); \
*(__be32 *)room = cpu_to_be32(token); \
} while(0)
static unsigned long __init dt_find_string(char *str)
{
char *s, *os;
s = os = (char *)dt_string_start;
s += 4;
while (s < (char *)dt_string_end) {
if (prom_strcmp(s, str) == 0)
return s - os;
s += prom_strlen(s) + 1;
}
return 0;
}
/*
* The Open Firmware 1275 specification states properties must be 31 bytes or
* less, however not all firmwares obey this. Make it 64 bytes to be safe.
*/
#define MAX_PROPERTY_NAME 64
static void __init scan_dt_build_strings(phandle node,
unsigned long *mem_start,
unsigned long *mem_end)
{
char *prev_name, *namep, *sstart;
unsigned long soff;
phandle child;
sstart = (char *)dt_string_start;
/* get and store all property names */
prev_name = "";
for (;;) {
/* 64 is max len of name including nul. */
namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) {
/* No more nodes: unwind alloc */
*mem_start = (unsigned long)namep;
break;
}
/* skip "name" */
if (prom_strcmp(namep, "name") == 0) {
*mem_start = (unsigned long)namep;
prev_name = "name";
continue;
}
/* get/create string entry */
soff = dt_find_string(namep);
if (soff != 0) {
*mem_start = (unsigned long)namep;
namep = sstart + soff;
} else {
/* Trim off some if we can */
*mem_start = (unsigned long)namep + prom_strlen(namep) + 1;
dt_string_end = *mem_start;
}
prev_name = namep;
}
/* do all our children */
child = call_prom("child", 1, 1, node);
while (child != 0) {
scan_dt_build_strings(child, mem_start, mem_end);
child = call_prom("peer", 1, 1, child);
}
}
static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
phandle child;
char *namep, *prev_name, *sstart, *p, *ep, *lp, *path;
unsigned long soff;
unsigned char *valp;
static char pname[MAX_PROPERTY_NAME] __prombss;
int l, room, has_phandle = 0;
dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end);
/* get the node's full name */
namep = (char *)*mem_start;
room = *mem_end - *mem_start;
if (room > 255)
room = 255;
l = call_prom("package-to-path", 3, 1, node, namep, room);
if (l >= 0) {
/* Didn't fit? Get more room. */
if (l >= room) {
if (l >= *mem_end - *mem_start)
namep = make_room(mem_start, mem_end, l+1, 1);
call_prom("package-to-path", 3, 1, node, namep, l);
}
namep[l] = '\0';
/* Fixup an Apple bug where they have bogus \0 chars in the
* middle of the path in some properties, and extract
* the unit name (everything after the last '/').
*/
for (lp = p = namep, ep = namep + l; p < ep; p++) {
if (*p == '/')
lp = namep;
else if (*p != 0)
*lp++ = *p;
}
*lp = 0;
*mem_start = _ALIGN((unsigned long)lp + 1, 4);
}
/* get it again for debugging */
path = prom_scratch;
memset(path, 0, sizeof(prom_scratch));
call_prom("package-to-path", 3, 1, node, path, sizeof(prom_scratch) - 1);
/* get and store all properties */
prev_name = "";
sstart = (char *)dt_string_start;
for (;;) {
if (call_prom("nextprop", 3, 1, node, prev_name,
pname) != 1)
break;
/* skip "name" */
if (prom_strcmp(pname, "name") == 0) {
prev_name = "name";
continue;
}
/* find string offset */
soff = dt_find_string(pname);
if (soff == 0) {
prom_printf("WARNING: Can't find string index for"
" <%s>, node %s\n", pname, path);
break;
}
prev_name = sstart + soff;
/* get length */
l = call_prom("getproplen", 2, 1, node, pname);
/* sanity checks */
if (l == PROM_ERROR)
continue;
/* push property head */
dt_push_token(OF_DT_PROP, mem_start, mem_end);
dt_push_token(l, mem_start, mem_end);
dt_push_token(soff, mem_start, mem_end);
/* push property content */
valp = make_room(mem_start, mem_end, l, 4);
call_prom("getprop", 4, 1, node, pname, valp, l);
*mem_start = _ALIGN(*mem_start, 4);
if (!prom_strcmp(pname, "phandle"))
has_phandle = 1;
}
/* Add a "phandle" property if none already exist */
if (!has_phandle) {
soff = dt_find_string("phandle");
if (soff == 0)
prom_printf("WARNING: Can't find string index for <phandle> node %s\n", path);
else {
dt_push_token(OF_DT_PROP, mem_start, mem_end);
dt_push_token(4, mem_start, mem_end);
dt_push_token(soff, mem_start, mem_end);
valp = make_room(mem_start, mem_end, 4, 4);
*(__be32 *)valp = cpu_to_be32(node);
}
}
/* do all our children */
child = call_prom("child", 1, 1, node);
while (child != 0) {
scan_dt_build_struct(child, mem_start, mem_end);
child = call_prom("peer", 1, 1, child);
}
dt_push_token(OF_DT_END_NODE, mem_start, mem_end);
}
static void __init flatten_device_tree(void)
{
phandle root;
unsigned long mem_start, mem_end, room;
struct boot_param_header *hdr;
char *namep;
u64 *rsvmap;
/*
* Check how much room we have between alloc top & bottom (+/- a
* few pages), crop to 1MB, as this is our "chunk" size
*/
room = alloc_top - alloc_bottom - 0x4000;
if (room > DEVTREE_CHUNK_SIZE)
room = DEVTREE_CHUNK_SIZE;
prom_debug("starting device tree allocs at %lx\n", alloc_bottom);
/* Now try to claim that */
mem_start = (unsigned long)alloc_up(room, PAGE_SIZE);
if (mem_start == 0)
prom_panic("Can't allocate initial device-tree chunk\n");
mem_end = mem_start + room;
/* Get root of tree */
root = call_prom("peer", 1, 1, (phandle)0);
if (root == (phandle)0)
prom_panic ("couldn't get device tree root\n");
/* Build header and make room for mem rsv map */
mem_start = _ALIGN(mem_start, 4);
hdr = make_room(&mem_start, &mem_end,
sizeof(struct boot_param_header), 4);
dt_header_start = (unsigned long)hdr;
rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8);
/* Start of strings */
mem_start = PAGE_ALIGN(mem_start);
dt_string_start = mem_start;
mem_start += 4; /* hole */
/* Add "phandle" in there, we'll need it */
namep = make_room(&mem_start, &mem_end, 16, 1);
prom_strcpy(namep, "phandle");
mem_start = (unsigned long)namep + prom_strlen(namep) + 1;
/* Build string array */
prom_printf("Building dt strings...\n");
scan_dt_build_strings(root, &mem_start, &mem_end);
dt_string_end = mem_start;
/* Build structure */
mem_start = PAGE_ALIGN(mem_start);
dt_struct_start = mem_start;
prom_printf("Building dt structure...\n");
scan_dt_build_struct(root, &mem_start, &mem_end);
dt_push_token(OF_DT_END, &mem_start, &mem_end);
dt_struct_end = PAGE_ALIGN(mem_start);
/* Finish header */
hdr->boot_cpuid_phys = cpu_to_be32(prom.cpu);
hdr->magic = cpu_to_be32(OF_DT_HEADER);
hdr->totalsize = cpu_to_be32(dt_struct_end - dt_header_start);
hdr->off_dt_struct = cpu_to_be32(dt_struct_start - dt_header_start);
hdr->off_dt_strings = cpu_to_be32(dt_string_start - dt_header_start);
hdr->dt_strings_size = cpu_to_be32(dt_string_end - dt_string_start);
hdr->off_mem_rsvmap = cpu_to_be32(((unsigned long)rsvmap) - dt_header_start);
hdr->version = cpu_to_be32(OF_DT_VERSION);
/* Version 16 is not backward compatible */
hdr->last_comp_version = cpu_to_be32(0x10);
/* Copy the reserve map in */
memcpy(rsvmap, mem_reserve_map, sizeof(mem_reserve_map));
#ifdef DEBUG_PROM
{
int i;
prom_printf("reserved memory map:\n");
for (i = 0; i < mem_reserve_cnt; i++)
prom_printf(" %llx - %llx\n",
be64_to_cpu(mem_reserve_map[i].base),
be64_to_cpu(mem_reserve_map[i].size));
}
#endif
/* Bump mem_reserve_cnt to cause further reservations to fail
* since it's too late.
*/
mem_reserve_cnt = MEM_RESERVE_MAP_SIZE;
prom_printf("Device tree strings 0x%lx -> 0x%lx\n",
dt_string_start, dt_string_end);
prom_printf("Device tree struct 0x%lx -> 0x%lx\n",
dt_struct_start, dt_struct_end);
}
#ifdef CONFIG_PPC_MAPLE
/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
* The values are bad, and it doesn't even have the right number of cells. */
static void __init fixup_device_tree_maple(void)
{
phandle isa;
u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
u32 isa_ranges[6];
char *name;
name = "/ht@0/isa@4";
isa = call_prom("finddevice", 1, 1, ADDR(name));
if (!PHANDLE_VALID(isa)) {
name = "/ht@0/isa@6";
isa = call_prom("finddevice", 1, 1, ADDR(name));
rloc = 0x01003000; /* IO space; PCI device = 6 */
}
if (!PHANDLE_VALID(isa))
return;
if (prom_getproplen(isa, "ranges") != 12)
return;
if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
== PROM_ERROR)
return;
if (isa_ranges[0] != 0x1 ||
isa_ranges[1] != 0xf4000000 ||
isa_ranges[2] != 0x00010000)
return;
prom_printf("Fixing up bogus ISA range on Maple/Apache...\n");
isa_ranges[0] = 0x1;
isa_ranges[1] = 0x0;
isa_ranges[2] = rloc;
isa_ranges[3] = 0x0;
isa_ranges[4] = 0x0;
isa_ranges[5] = 0x00010000;
prom_setprop(isa, name, "ranges",
isa_ranges, sizeof(isa_ranges));
}
#define CPC925_MC_START 0xf8000000
#define CPC925_MC_LENGTH 0x1000000
/* The values for memory-controller don't have right number of cells */
static void __init fixup_device_tree_maple_memory_controller(void)
{
phandle mc;
u32 mc_reg[4];
char *name = "/hostbridge@f8000000";
u32 ac, sc;
mc = call_prom("finddevice", 1, 1, ADDR(name));
if (!PHANDLE_VALID(mc))
return;
if (prom_getproplen(mc, "reg") != 8)
return;
prom_getprop(prom.root, "#address-cells", &ac, sizeof(ac));
prom_getprop(prom.root, "#size-cells", &sc, sizeof(sc));
if ((ac != 2) || (sc != 2))
return;
if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR)
return;
if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH)
return;
prom_printf("Fixing up bogus hostbridge on Maple...\n");
mc_reg[0] = 0x0;
mc_reg[1] = CPC925_MC_START;
mc_reg[2] = 0x0;
mc_reg[3] = CPC925_MC_LENGTH;
prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg));
}
#else
#define fixup_device_tree_maple()
#define fixup_device_tree_maple_memory_controller()
#endif
#ifdef CONFIG_PPC_CHRP
/*
* Pegasos and BriQ lacks the "ranges" property in the isa node
* Pegasos needs decimal IRQ 14/15, not hexadecimal
* Pegasos has the IDE configured in legacy mode, but advertised as native
*/
static void __init fixup_device_tree_chrp(void)
{
phandle ph;
u32 prop[6];
u32 rloc = 0x01006000; /* IO space; PCI device = 12 */
char *name;
int rc;
name = "/pci@80000000/isa@c";
ph = call_prom("finddevice", 1, 1, ADDR(name));
if (!PHANDLE_VALID(ph)) {
name = "/pci@ff500000/isa@6";
ph = call_prom("finddevice", 1, 1, ADDR(name));
rloc = 0x01003000; /* IO space; PCI device = 6 */
}
if (PHANDLE_VALID(ph)) {
rc = prom_getproplen(ph, "ranges");
if (rc == 0 || rc == PROM_ERROR) {
prom_printf("Fixing up missing ISA range on Pegasos...\n");
prop[0] = 0x1;
prop[1] = 0x0;
prop[2] = rloc;
prop[3] = 0x0;
prop[4] = 0x0;
prop[5] = 0x00010000;
prom_setprop(ph, name, "ranges", prop, sizeof(prop));
}
}
name = "/pci@80000000/ide@C,1";
ph = call_prom("finddevice", 1, 1, ADDR(name));
if (PHANDLE_VALID(ph)) {
prom_printf("Fixing up IDE interrupt on Pegasos...\n");
prop[0] = 14;
prop[1] = 0x0;
prom_setprop(ph, name, "interrupts", prop, 2*sizeof(u32));
prom_printf("Fixing up IDE class-code on Pegasos...\n");
rc = prom_getprop(ph, "class-code", prop, sizeof(u32));
if (rc == sizeof(u32)) {
prop[0] &= ~0x5;
prom_setprop(ph, name, "class-code", prop, sizeof(u32));
}
}
}
#else
#define fixup_device_tree_chrp()
#endif
#if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
static void __init fixup_device_tree_pmac(void)
{
phandle u3, i2c, mpic;
u32 u3_rev;
u32 interrupts[2];
u32 parent;
/* Some G5s have a missing interrupt definition, fix it up here */
u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
if (!PHANDLE_VALID(u3))
return;
i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
if (!PHANDLE_VALID(i2c))
return;
mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
if (!PHANDLE_VALID(mpic))
return;
/* check if proper rev of u3 */
if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
== PROM_ERROR)
return;
if (u3_rev < 0x35 || u3_rev > 0x39)
return;
/* does it need fixup ? */
if (prom_getproplen(i2c, "interrupts") > 0)
return;
prom_printf("fixing up bogus interrupts for u3 i2c...\n");
/* interrupt on this revision of u3 is number 0 and level */
interrupts[0] = 0;
interrupts[1] = 1;
prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts",
&interrupts, sizeof(interrupts));
parent = (u32)mpic;
prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
&parent, sizeof(parent));
}
#else
#define fixup_device_tree_pmac()
#endif
#ifdef CONFIG_PPC_EFIKA
/*
* The MPC5200 FEC driver requires an phy-handle property to tell it how
* to talk to the phy. If the phy-handle property is missing, then this
* function is called to add the appropriate nodes and link it to the
* ethernet node.
*/
static void __init fixup_device_tree_efika_add_phy(void)
{
u32 node;
char prop[64];
int rv;
/* Check if /builtin/ethernet exists - bail if it doesn't */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/ethernet"));
if (!PHANDLE_VALID(node))
return;
/* Check if the phy-handle property exists - bail if it does */
rv = prom_getprop(node, "phy-handle", prop, sizeof(prop));
if (!rv)
return;
/*
* At this point the ethernet device doesn't have a phy described.
* Now we need to add the missing phy node and linkage
*/
/* Check for an MDIO bus node - if missing then create one */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
if (!PHANDLE_VALID(node)) {
prom_printf("Adding Ethernet MDIO node\n");
call_prom("interpret", 1, 1,
" s\" /builtin\" find-device"
" new-device"
" 1 encode-int s\" #address-cells\" property"
" 0 encode-int s\" #size-cells\" property"
" s\" mdio\" device-name"
" s\" fsl,mpc5200b-mdio\" encode-string"
" s\" compatible\" property"
" 0xf0003000 0x400 reg"
" 0x2 encode-int"
" 0x5 encode-int encode+"
" 0x3 encode-int encode+"
" s\" interrupts\" property"
" finish-device");
};
/* Check for a PHY device node - if missing then create one and
* give it's phandle to the ethernet node */
node = call_prom("finddevice", 1, 1,
ADDR("/builtin/mdio/ethernet-phy"));
if (!PHANDLE_VALID(node)) {
prom_printf("Adding Ethernet PHY node\n");
call_prom("interpret", 1, 1,
" s\" /builtin/mdio\" find-device"
" new-device"
" s\" ethernet-phy\" device-name"
" 0x10 encode-int s\" reg\" property"
" my-self"
" ihandle>phandle"
" finish-device"
" s\" /builtin/ethernet\" find-device"
" encode-int"
" s\" phy-handle\" property"
" device-end");
}
}
static void __init fixup_device_tree_efika(void)
{
int sound_irq[3] = { 2, 2, 0 };
int bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0,
3,4,0, 3,5,0, 3,6,0, 3,7,0,
3,8,0, 3,9,0, 3,10,0, 3,11,0,
3,12,0, 3,13,0, 3,14,0, 3,15,0 };
u32 node;
char prop[64];
int rv, len;
/* Check if we're really running on a EFIKA */
node = call_prom("finddevice", 1, 1, ADDR("/"));
if (!PHANDLE_VALID(node))
return;
rv = prom_getprop(node, "model", prop, sizeof(prop));
if (rv == PROM_ERROR)
return;
if (prom_strcmp(prop, "EFIKA5K2"))
return;
prom_printf("Applying EFIKA device tree fixups\n");
/* Claiming to be 'chrp' is death */
node = call_prom("finddevice", 1, 1, ADDR("/"));
rv = prom_getprop(node, "device_type", prop, sizeof(prop));
if (rv != PROM_ERROR && (prom_strcmp(prop, "chrp") == 0))
prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
/* CODEGEN,description is exposed in /proc/cpuinfo so
fix that too */
rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
if (rv != PROM_ERROR && (prom_strstr(prop, "CHRP")))
prom_setprop(node, "/", "CODEGEN,description",
"Efika 5200B PowerPC System",
sizeof("Efika 5200B PowerPC System"));
/* Fixup bestcomm interrupts property */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
if (PHANDLE_VALID(node)) {
len = prom_getproplen(node, "interrupts");
if (len == 12) {
prom_printf("Fixing bestcomm interrupts property\n");
prom_setprop(node, "/builtin/bestcom", "interrupts",
bcomm_irq, sizeof(bcomm_irq));
}
}
/* Fixup sound interrupts property */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/sound"));
if (PHANDLE_VALID(node)) {
rv = prom_getprop(node, "interrupts", prop, sizeof(prop));
if (rv == PROM_ERROR) {
prom_printf("Adding sound interrupts property\n");
prom_setprop(node, "/builtin/sound", "interrupts",
sound_irq, sizeof(sound_irq));
}
}
/* Make sure ethernet phy-handle property exists */
fixup_device_tree_efika_add_phy();
}
#else
#define fixup_device_tree_efika()
#endif
#ifdef CONFIG_PPC_PASEMI_NEMO
/*
* CFE supplied on Nemo is broken in several ways, biggest
* problem is that it reassigns ISA interrupts to unused mpic ints.
* Add an interrupt-controller property for the io-bridge to use
* and correct the ints so we can attach them to an irq_domain
*/
static void __init fixup_device_tree_pasemi(void)
{
u32 interrupts[2], parent, rval, val = 0;
char *name, *pci_name;
phandle iob, node;
/* Find the root pci node */
name = "/pxp@0,e0000000";
iob = call_prom("finddevice", 1, 1, ADDR(name));
if (!PHANDLE_VALID(iob))
return;
/* check if interrupt-controller node set yet */
if (prom_getproplen(iob, "interrupt-controller") !=PROM_ERROR)
return;
prom_printf("adding interrupt-controller property for SB600...\n");
prom_setprop(iob, name, "interrupt-controller", &val, 0);
pci_name = "/pxp@0,e0000000/pci@11";
node = call_prom("finddevice", 1, 1, ADDR(pci_name));
parent = ADDR(iob);
for( ; prom_next_node(&node); ) {
/* scan each node for one with an interrupt */
if (!PHANDLE_VALID(node))
continue;
rval = prom_getproplen(node, "interrupts");
if (rval == 0 || rval == PROM_ERROR)
continue;
prom_getprop(node, "interrupts", &interrupts, sizeof(interrupts));
if ((interrupts[0] < 212) || (interrupts[0] > 222))
continue;
/* found a node, update both interrupts and interrupt-parent */
if ((interrupts[0] >= 212) && (interrupts[0] <= 215))
interrupts[0] -= 203;
if ((interrupts[0] >= 216) && (interrupts[0] <= 220))
interrupts[0] -= 213;
if (interrupts[0] == 221)
interrupts[0] = 14;
if (interrupts[0] == 222)
interrupts[0] = 8;
prom_setprop(node, pci_name, "interrupts", interrupts,
sizeof(interrupts));
prom_setprop(node, pci_name, "interrupt-parent", &parent,
sizeof(parent));
}
/*
* The io-bridge has device_type set to 'io-bridge' change it to 'isa'
* so that generic isa-bridge code can add the SB600 and its on-board
* peripherals.
*/
name = "/pxp@0,e0000000/io-bridge@0";
iob = call_prom("finddevice", 1, 1, ADDR(name));
if (!PHANDLE_VALID(iob))
return;
/* device_type is already set, just change it. */
prom_printf("Changing device_type of SB600 node...\n");
prom_setprop(iob, name, "device_type", "isa", sizeof("isa"));
}
#else /* !CONFIG_PPC_PASEMI_NEMO */
static inline void fixup_device_tree_pasemi(void) { }
#endif
static void __init fixup_device_tree(void)
{
fixup_device_tree_maple();
fixup_device_tree_maple_memory_controller();
fixup_device_tree_chrp();
fixup_device_tree_pmac();
fixup_device_tree_efika();
fixup_device_tree_pasemi();
}
static void __init prom_find_boot_cpu(void)
{
__be32 rval;
ihandle prom_cpu;
phandle cpu_pkg;
rval = 0;
if (prom_getprop(prom.chosen, "cpu", &rval, sizeof(rval)) <= 0)
return;
prom_cpu = be32_to_cpu(rval);
cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
if (!PHANDLE_VALID(cpu_pkg))
return;
prom_getprop(cpu_pkg, "reg", &rval, sizeof(rval));
prom.cpu = be32_to_cpu(rval);
prom_debug("Booting CPU hw index = %d\n", prom.cpu);
}
static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
{
#ifdef CONFIG_BLK_DEV_INITRD
if (r3 && r4 && r4 != 0xdeadbeef) {
__be64 val;
prom_initrd_start = is_kernel_addr(r3) ? __pa(r3) : r3;
prom_initrd_end = prom_initrd_start + r4;
val = cpu_to_be64(prom_initrd_start);
prom_setprop(prom.chosen, "/chosen", "linux,initrd-start",
&val, sizeof(val));
val = cpu_to_be64(prom_initrd_end);
prom_setprop(prom.chosen, "/chosen", "linux,initrd-end",
&val, sizeof(val));
reserve_mem(prom_initrd_start,
prom_initrd_end - prom_initrd_start);
prom_debug("initrd_start=0x%lx\n", prom_initrd_start);
prom_debug("initrd_end=0x%lx\n", prom_initrd_end);
}
#endif /* CONFIG_BLK_DEV_INITRD */
}
#ifdef CONFIG_PPC64
#ifdef CONFIG_RELOCATABLE
static void reloc_toc(void)
{
}
static void unreloc_toc(void)
{
}
#else
static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
{
unsigned long i;
unsigned long *toc_entry;
/* Get the start of the TOC by using r2 directly. */
asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
for (i = 0; i < nr_entries; i++) {
*toc_entry = *toc_entry + offset;
toc_entry++;
}
}
static void reloc_toc(void)
{
unsigned long offset = reloc_offset();
unsigned long nr_entries =
(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
__reloc_toc(offset, nr_entries);
mb();
}
static void unreloc_toc(void)
{
unsigned long offset = reloc_offset();
unsigned long nr_entries =
(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
mb();
__reloc_toc(-offset, nr_entries);
}
#endif
#endif
/*
* We enter here early on, when the Open Firmware prom is still
* handling exceptions and the MMU hash table for us.
*/
unsigned long __init prom_init(unsigned long r3, unsigned long r4,
unsigned long pp,
unsigned long r6, unsigned long r7,
unsigned long kbase)
{
unsigned long hdr;
#ifdef CONFIG_PPC32
unsigned long offset = reloc_offset();
reloc_got2(offset);
#else
reloc_toc();
#endif
/*
* First zero the BSS
*/
memset(&__bss_start, 0, __bss_stop - __bss_start);
/*
* Init interface to Open Firmware, get some node references,
* like /chosen
*/
prom_init_client_services(pp);
/*
* See if this OF is old enough that we need to do explicit maps
* and other workarounds
*/
prom_find_mmu();
/*
* Init prom stdout device
*/
prom_init_stdout();
prom_printf("Preparing to boot %s", linux_banner);
/*
* Get default machine type. At this point, we do not differentiate
* between pSeries SMP and pSeries LPAR
*/
of_platform = prom_find_machine_type();
prom_printf("Detected machine type: %x\n", of_platform);
#ifndef CONFIG_NONSTATIC_KERNEL
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
#endif
/*
* Check for an initrd
*/
prom_check_initrd(r3, r4);
/*
* Do early parsing of command line
*/
early_cmdline_parse();
#ifdef CONFIG_PPC_PSERIES
/*
* On pSeries, inform the firmware about our capabilities
*/
if (of_platform == PLATFORM_PSERIES ||
of_platform == PLATFORM_PSERIES_LPAR)
prom_send_capabilities();
#endif
/*
* Copy the CPU hold code
*/
if (of_platform != PLATFORM_POWERMAC)
copy_and_flush(0, kbase, 0x100, 0);
/*
* Initialize memory management within prom_init
*/
prom_init_mem();
/*
* Determine which cpu is actually running right _now_
*/
prom_find_boot_cpu();
/*
* Initialize display devices
*/
prom_check_displays();
#if defined(CONFIG_PPC64) && defined(__BIG_ENDIAN__)
/*
* Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
* that uses the allocator, we need to make sure we get the top of memory
* available for us here...
*/
if (of_platform == PLATFORM_PSERIES)
prom_initialize_tce_table();
#endif
/*
* On non-powermacs, try to instantiate RTAS. PowerMacs don't
* have a usable RTAS implementation.
*/
if (of_platform != PLATFORM_POWERMAC)
prom_instantiate_rtas();
#ifdef CONFIG_PPC64
/* instantiate sml */
prom_instantiate_sml();
#endif
/*
* On non-powermacs, put all CPUs in spin-loops.
*
* PowerMacs use a different mechanism to spin CPUs
*
* (This must be done after instanciating RTAS)
*/
if (of_platform != PLATFORM_POWERMAC)
prom_hold_cpus();
/*
* Fill in some infos for use by the kernel later on
*/
if (prom_memory_limit) {
__be64 val = cpu_to_be64(prom_memory_limit);
prom_setprop(prom.chosen, "/chosen", "linux,memory-limit",
&val, sizeof(val));
}
#ifdef CONFIG_PPC64
if (prom_iommu_off)
prom_setprop(prom.chosen, "/chosen", "linux,iommu-off",
NULL, 0);
if (prom_iommu_force_on)
prom_setprop(prom.chosen, "/chosen", "linux,iommu-force-on",
NULL, 0);
if (prom_tce_alloc_start) {
prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-start",
&prom_tce_alloc_start,
sizeof(prom_tce_alloc_start));
prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-end",
&prom_tce_alloc_end,
sizeof(prom_tce_alloc_end));
}
#endif
/*
* Fixup any known bugs in the device-tree
*/
fixup_device_tree();
/*
* Now finally create the flattened device-tree
*/
prom_printf("copying OF device tree...\n");
flatten_device_tree();
/*
* in case stdin is USB and still active on IBM machines...
* Unfortunately quiesce crashes on some powermacs if we have
* closed stdin already (in particular the powerbook 101).
*/
if (of_platform != PLATFORM_POWERMAC)
prom_close_stdin();
/*
* Call OF "quiesce" method to shut down pending DMA's from
* devices etc...
*/
prom_printf("Quiescing Open Firmware ...\n");
call_prom("quiesce", 0, 0);
/*
* And finally, call the kernel passing it the flattened device
* tree and NULL as r5, thus triggering the new entry point which
* is common to us and kexec
*/
hdr = dt_header_start;
/* Don't print anything after quiesce under OPAL, it crashes OFW */
prom_printf("Booting Linux via __start() @ 0x%lx ...\n", kbase);
prom_debug("->dt_header_start=0x%lx\n", hdr);
#ifdef CONFIG_PPC32
reloc_got2(-offset);
#else
unreloc_toc();
#endif
__start(hdr, kbase, 0, 0, 0, 0, 0);
return 0;
}