| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * GPIO based serio bus driver for bit banging the PS/2 protocol |
| * |
| * Author: Danilo Krummrich <danilokrummrich@dk-develop.de> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/serio.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| #include <linux/completion.h> |
| #include <linux/mutex.h> |
| #include <linux/preempt.h> |
| #include <linux/property.h> |
| #include <linux/of.h> |
| #include <linux/jiffies.h> |
| #include <linux/delay.h> |
| |
| #define DRIVER_NAME "ps2-gpio" |
| |
| #define PS2_MODE_RX 0 |
| #define PS2_MODE_TX 1 |
| |
| #define PS2_START_BIT 0 |
| #define PS2_DATA_BIT0 1 |
| #define PS2_DATA_BIT1 2 |
| #define PS2_DATA_BIT2 3 |
| #define PS2_DATA_BIT3 4 |
| #define PS2_DATA_BIT4 5 |
| #define PS2_DATA_BIT5 6 |
| #define PS2_DATA_BIT6 7 |
| #define PS2_DATA_BIT7 8 |
| #define PS2_PARITY_BIT 9 |
| #define PS2_STOP_BIT 10 |
| #define PS2_TX_TIMEOUT 11 |
| #define PS2_ACK_BIT 12 |
| |
| #define PS2_DEV_RET_ACK 0xfa |
| #define PS2_DEV_RET_NACK 0xfe |
| |
| #define PS2_CMD_RESEND 0xfe |
| |
| struct ps2_gpio_data { |
| struct device *dev; |
| struct serio *serio; |
| unsigned char mode; |
| struct gpio_desc *gpio_clk; |
| struct gpio_desc *gpio_data; |
| bool write_enable; |
| int irq; |
| unsigned char rx_cnt; |
| unsigned char rx_byte; |
| unsigned char tx_cnt; |
| unsigned char tx_byte; |
| struct completion tx_done; |
| struct mutex tx_mutex; |
| struct delayed_work tx_work; |
| }; |
| |
| static int ps2_gpio_open(struct serio *serio) |
| { |
| struct ps2_gpio_data *drvdata = serio->port_data; |
| |
| enable_irq(drvdata->irq); |
| return 0; |
| } |
| |
| static void ps2_gpio_close(struct serio *serio) |
| { |
| struct ps2_gpio_data *drvdata = serio->port_data; |
| |
| flush_delayed_work(&drvdata->tx_work); |
| disable_irq(drvdata->irq); |
| } |
| |
| static int __ps2_gpio_write(struct serio *serio, unsigned char val) |
| { |
| struct ps2_gpio_data *drvdata = serio->port_data; |
| |
| disable_irq_nosync(drvdata->irq); |
| gpiod_direction_output(drvdata->gpio_clk, 0); |
| |
| drvdata->mode = PS2_MODE_TX; |
| drvdata->tx_byte = val; |
| |
| schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200)); |
| |
| return 0; |
| } |
| |
| static int ps2_gpio_write(struct serio *serio, unsigned char val) |
| { |
| struct ps2_gpio_data *drvdata = serio->port_data; |
| int ret = 0; |
| |
| if (in_task()) { |
| mutex_lock(&drvdata->tx_mutex); |
| __ps2_gpio_write(serio, val); |
| if (!wait_for_completion_timeout(&drvdata->tx_done, |
| msecs_to_jiffies(10000))) |
| ret = SERIO_TIMEOUT; |
| mutex_unlock(&drvdata->tx_mutex); |
| } else { |
| __ps2_gpio_write(serio, val); |
| } |
| |
| return ret; |
| } |
| |
| static void ps2_gpio_tx_work_fn(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct ps2_gpio_data *drvdata = container_of(dwork, |
| struct ps2_gpio_data, |
| tx_work); |
| |
| enable_irq(drvdata->irq); |
| gpiod_direction_output(drvdata->gpio_data, 0); |
| gpiod_direction_input(drvdata->gpio_clk); |
| } |
| |
| static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata) |
| { |
| unsigned char byte, cnt; |
| int data; |
| int rxflags = 0; |
| static unsigned long old_jiffies; |
| |
| byte = drvdata->rx_byte; |
| cnt = drvdata->rx_cnt; |
| |
| if (old_jiffies == 0) |
| old_jiffies = jiffies; |
| |
| if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { |
| dev_err(drvdata->dev, |
| "RX: timeout, probably we missed an interrupt\n"); |
| goto err; |
| } |
| old_jiffies = jiffies; |
| |
| data = gpiod_get_value(drvdata->gpio_data); |
| if (unlikely(data < 0)) { |
| dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n", |
| data); |
| goto err; |
| } |
| |
| switch (cnt) { |
| case PS2_START_BIT: |
| /* start bit should be low */ |
| if (unlikely(data)) { |
| dev_err(drvdata->dev, "RX: start bit should be low\n"); |
| goto err; |
| } |
| break; |
| case PS2_DATA_BIT0: |
| case PS2_DATA_BIT1: |
| case PS2_DATA_BIT2: |
| case PS2_DATA_BIT3: |
| case PS2_DATA_BIT4: |
| case PS2_DATA_BIT5: |
| case PS2_DATA_BIT6: |
| case PS2_DATA_BIT7: |
| /* processing data bits */ |
| if (data) |
| byte |= (data << (cnt - 1)); |
| break; |
| case PS2_PARITY_BIT: |
| /* check odd parity */ |
| if (!((hweight8(byte) & 1) ^ data)) { |
| rxflags |= SERIO_PARITY; |
| dev_warn(drvdata->dev, "RX: parity error\n"); |
| if (!drvdata->write_enable) |
| goto err; |
| } |
| |
| /* Do not send spurious ACK's and NACK's when write fn is |
| * not provided. |
| */ |
| if (!drvdata->write_enable) { |
| if (byte == PS2_DEV_RET_NACK) |
| goto err; |
| else if (byte == PS2_DEV_RET_ACK) |
| break; |
| } |
| |
| /* Let's send the data without waiting for the stop bit to be |
| * sent. It may happen that we miss the stop bit. When this |
| * happens we have no way to recover from this, certainly |
| * missing the parity bit would be recognized when processing |
| * the stop bit. When missing both, data is lost. |
| */ |
| serio_interrupt(drvdata->serio, byte, rxflags); |
| dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte); |
| break; |
| case PS2_STOP_BIT: |
| /* stop bit should be high */ |
| if (unlikely(!data)) { |
| dev_err(drvdata->dev, "RX: stop bit should be high\n"); |
| goto err; |
| } |
| cnt = byte = 0; |
| old_jiffies = 0; |
| goto end; /* success */ |
| default: |
| dev_err(drvdata->dev, "RX: got out of sync with the device\n"); |
| goto err; |
| } |
| |
| cnt++; |
| goto end; /* success */ |
| |
| err: |
| cnt = byte = 0; |
| old_jiffies = 0; |
| __ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND); |
| end: |
| drvdata->rx_cnt = cnt; |
| drvdata->rx_byte = byte; |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata) |
| { |
| unsigned char byte, cnt; |
| int data; |
| static unsigned long old_jiffies; |
| |
| cnt = drvdata->tx_cnt; |
| byte = drvdata->tx_byte; |
| |
| if (old_jiffies == 0) |
| old_jiffies = jiffies; |
| |
| if ((jiffies - old_jiffies) > usecs_to_jiffies(100)) { |
| dev_err(drvdata->dev, |
| "TX: timeout, probably we missed an interrupt\n"); |
| goto err; |
| } |
| old_jiffies = jiffies; |
| |
| switch (cnt) { |
| case PS2_START_BIT: |
| /* should never happen */ |
| dev_err(drvdata->dev, |
| "TX: start bit should have been sent already\n"); |
| goto err; |
| case PS2_DATA_BIT0: |
| case PS2_DATA_BIT1: |
| case PS2_DATA_BIT2: |
| case PS2_DATA_BIT3: |
| case PS2_DATA_BIT4: |
| case PS2_DATA_BIT5: |
| case PS2_DATA_BIT6: |
| case PS2_DATA_BIT7: |
| data = byte & BIT(cnt - 1); |
| gpiod_set_value(drvdata->gpio_data, data); |
| break; |
| case PS2_PARITY_BIT: |
| /* do odd parity */ |
| data = !(hweight8(byte) & 1); |
| gpiod_set_value(drvdata->gpio_data, data); |
| break; |
| case PS2_STOP_BIT: |
| /* release data line to generate stop bit */ |
| gpiod_direction_input(drvdata->gpio_data); |
| break; |
| case PS2_TX_TIMEOUT: |
| /* Devices generate one extra clock pulse before sending the |
| * acknowledgment. |
| */ |
| break; |
| case PS2_ACK_BIT: |
| gpiod_direction_input(drvdata->gpio_data); |
| data = gpiod_get_value(drvdata->gpio_data); |
| if (data) { |
| dev_warn(drvdata->dev, "TX: received NACK, retry\n"); |
| goto err; |
| } |
| |
| drvdata->mode = PS2_MODE_RX; |
| complete(&drvdata->tx_done); |
| |
| cnt = 1; |
| old_jiffies = 0; |
| goto end; /* success */ |
| default: |
| /* Probably we missed the stop bit. Therefore we release data |
| * line and try again. |
| */ |
| gpiod_direction_input(drvdata->gpio_data); |
| dev_err(drvdata->dev, "TX: got out of sync with the device\n"); |
| goto err; |
| } |
| |
| cnt++; |
| goto end; /* success */ |
| |
| err: |
| cnt = 1; |
| old_jiffies = 0; |
| gpiod_direction_input(drvdata->gpio_data); |
| __ps2_gpio_write(drvdata->serio, drvdata->tx_byte); |
| end: |
| drvdata->tx_cnt = cnt; |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ps2_gpio_irq(int irq, void *dev_id) |
| { |
| struct ps2_gpio_data *drvdata = dev_id; |
| |
| return drvdata->mode ? ps2_gpio_irq_tx(drvdata) : |
| ps2_gpio_irq_rx(drvdata); |
| } |
| |
| static int ps2_gpio_get_props(struct device *dev, |
| struct ps2_gpio_data *drvdata) |
| { |
| drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN); |
| if (IS_ERR(drvdata->gpio_data)) { |
| dev_err(dev, "failed to request data gpio: %ld", |
| PTR_ERR(drvdata->gpio_data)); |
| return PTR_ERR(drvdata->gpio_data); |
| } |
| |
| drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN); |
| if (IS_ERR(drvdata->gpio_clk)) { |
| dev_err(dev, "failed to request clock gpio: %ld", |
| PTR_ERR(drvdata->gpio_clk)); |
| return PTR_ERR(drvdata->gpio_clk); |
| } |
| |
| drvdata->write_enable = device_property_read_bool(dev, |
| "write-enable"); |
| |
| return 0; |
| } |
| |
| static int ps2_gpio_probe(struct platform_device *pdev) |
| { |
| struct ps2_gpio_data *drvdata; |
| struct serio *serio; |
| struct device *dev = &pdev->dev; |
| int error; |
| |
| drvdata = devm_kzalloc(dev, sizeof(struct ps2_gpio_data), GFP_KERNEL); |
| serio = kzalloc(sizeof(struct serio), GFP_KERNEL); |
| if (!drvdata || !serio) { |
| error = -ENOMEM; |
| goto err_free_serio; |
| } |
| |
| error = ps2_gpio_get_props(dev, drvdata); |
| if (error) |
| goto err_free_serio; |
| |
| if (gpiod_cansleep(drvdata->gpio_data) || |
| gpiod_cansleep(drvdata->gpio_clk)) { |
| dev_err(dev, "GPIO data or clk are connected via slow bus\n"); |
| error = -EINVAL; |
| goto err_free_serio; |
| } |
| |
| drvdata->irq = platform_get_irq(pdev, 0); |
| if (drvdata->irq < 0) { |
| dev_err(dev, "failed to get irq from platform resource: %d\n", |
| drvdata->irq); |
| error = drvdata->irq; |
| goto err_free_serio; |
| } |
| |
| error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq, |
| IRQF_NO_THREAD, DRIVER_NAME, drvdata); |
| if (error) { |
| dev_err(dev, "failed to request irq %d: %d\n", |
| drvdata->irq, error); |
| goto err_free_serio; |
| } |
| |
| /* Keep irq disabled until serio->open is called. */ |
| disable_irq(drvdata->irq); |
| |
| serio->id.type = SERIO_8042; |
| serio->open = ps2_gpio_open; |
| serio->close = ps2_gpio_close; |
| /* Write can be enabled in platform/dt data, but possibly it will not |
| * work because of the tough timings. |
| */ |
| serio->write = drvdata->write_enable ? ps2_gpio_write : NULL; |
| serio->port_data = drvdata; |
| serio->dev.parent = dev; |
| strlcpy(serio->name, dev_name(dev), sizeof(serio->name)); |
| strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys)); |
| |
| drvdata->serio = serio; |
| drvdata->dev = dev; |
| drvdata->mode = PS2_MODE_RX; |
| |
| /* Tx count always starts at 1, as the start bit is sent implicitly by |
| * host-to-device communication initialization. |
| */ |
| drvdata->tx_cnt = 1; |
| |
| INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn); |
| init_completion(&drvdata->tx_done); |
| mutex_init(&drvdata->tx_mutex); |
| |
| serio_register_port(serio); |
| platform_set_drvdata(pdev, drvdata); |
| |
| return 0; /* success */ |
| |
| err_free_serio: |
| kfree(serio); |
| return error; |
| } |
| |
| static int ps2_gpio_remove(struct platform_device *pdev) |
| { |
| struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev); |
| |
| serio_unregister_port(drvdata->serio); |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id ps2_gpio_match[] = { |
| { .compatible = "ps2-gpio", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, ps2_gpio_match); |
| #endif |
| |
| static struct platform_driver ps2_gpio_driver = { |
| .probe = ps2_gpio_probe, |
| .remove = ps2_gpio_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = of_match_ptr(ps2_gpio_match), |
| }, |
| }; |
| module_platform_driver(ps2_gpio_driver); |
| |
| MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>"); |
| MODULE_DESCRIPTION("GPIO PS2 driver"); |
| MODULE_LICENSE("GPL v2"); |